Instructions on how to make paper airplanes. Origami airplanes made of paper: simple and complex models. Paper origami: airplane

Every child grows up to actively study homemade flying devices. What first interests a young researcher is how to make paper airplane, which can fly for a long time: 100, or better yet 1,000,000,000,000 meters? Sound familiar? Then you are in the right place: you will find many different variations that will inspire your child to design his own project. Age and gender are not important: the important thing is that the little person has to be taught the basics of paper aircraft manufacturing.

Today your baby is taking the first, albeit inept, steps towards her future profession. Immediate advice: do not leave your child alone with the diagrams. V younger age It is very important to stir up the child’s interest. You need to build, paint, invent and play and compete together, otherwise the child will quickly get bored with any game. While playing, the baby learns about the world. Even something as mundane as assembling a simple airliner from a green leaf can remain in a child’s heart as a happy memory for a lifetime.

Step-by-step instructions for a simple model

This is the simplest airplane model possible. It does tricks, floats easily, and can be upgraded if desired. Instructions on how to make a paper airplane for the youngest curious pilots:

bend the sheet in half lengthwise and crosswise to mark the midlines;
Fold the top square in half again and connect the corners with the resulting line;
turn the product over to the reverse side;
bend the model again from top to bottom in the center of the sheet;
form the nose of the airplane with a fold;
Use your fingernail to bend the sheet lengthwise and in half;
shape the nose again and repeat the bend again, but with a slight slope;
bend the wings and paint the plane together (you can take both pencils and paints, but they will need to be dried before the first test run).

Ready! The method is one of the simplest and deserves to be the first in today’s review of cool paper airplanes. It is easy for such an aircraft to set any movement vector, and wide, properly formed wings allow it to remain in flight for a long time.

How to make a paper airplane that flies 100 meters

One hundred children out of a hundred love this paper airplane: it will fly not just long and far, but very much! Although the complexity of the design is already quite higher than that of others. The time spent on this plane will pay off a hundredfold: screams of happiness are guaranteed.

We will need a sheet of paper, A4 size. It is better to take colored, thick paper (sold for printing, children's paper is not suitable). Fold the sheet in half lengthwise, unfold it and place it vertically in front of you. You will need to bend the corners towards each other, pressing the folds as tightly as possible, but the paper should not be crumpled. Make sure that the lines are symmetrical and even, otherwise the idea will not succeed.
The resulting free corners must be folded in half again so that the outer lines meet as in the figure. Our future long-flying aircraft is taking on its first contours.
The last two points should be repeated again. The result will be a kind of accordion, as in the picture.
Press the lines carefully. This is necessary for future, already rough paper folds, therefore, it is better not to skip these steps when trying to build an airplane on the fly. Then unfold the accordion and fold the sheet along the lines towards the center. Perform the operation on both sides.
Fold the sheet in half where the straight sheet meets the corner (see picture). Carefully press the line with your fingernail: check whether it is clearly marked or poorly visible.
Unfold the entire structure again. Now let's move on to making our super-model of a fast plane. Bend the top corners along the very first line. Making a paper airplane that flies for a long time is easier than it seems at first glance: just follow the instructions step by step.
Fold it towards the center horizontal line.
The resulting acute angle should “look” strictly in the center.
Fold it as shown in the picture again.
Turn the structure over to the other side ( reverse side up) and start folding the top corners towards the center. The whole structure will begin to come together: everything is great, you are doing great!
Gently press the paper with your fingers, making the folds perfectly even.
We are approaching the finish line, there is very little left: do the same on the other side. Align the folds very carefully./
Place the halves together. The outlines of this coolest thing are already clearly visible. paper airplane. Surely the child is already jumping up and down impatiently.
All that remains is to bend the wings in half and make stabilizers for them, bending the tips by 1-1.5 centimeters. The plane is ready for a test launch.

How to make a paper airplane that flies far and is easy to do

Another plane that flies long and far: the Avenger's Needle.

This model is made much simpler than the previous one, but it is no less interesting for children. The step-by-step instructions in the figure are simple and clear. To diversify the game, we recommend taking paper of different colors and letting the child come up with a name for each model made and launch them in turn, measuring which one flies the farthest.

From A4 sheet

We nicknamed another do-it-yourself paper airplane the Batman Airplane for its striking similarity to the superhero’s transport. Practice shows that this variety is inferior in flight range to many other models, but appearance deserves 10 points out of 10 and provokes enthusiastic exclamations from children throughout the area.

The scheme is extremely simple, but in the end we get a very beautiful vehicle for real heroes. Even a child can fold such a model on his own: conduct a master class and let the little one repeat every movement after you. We assure you that there will be no limits to happiness.

How to make a paper airplane with your own hands for children

One more is enough easy option. Despite the simplicity of execution, the plane flies smoothly, does not fall on its sides, and does not “peck” its nose. The child can upgrade the wings with additional folds and track the behavior of the plane in the air. Over time, make the task more difficult for your child: if earlier child repeated the movements after you, now switch roles and ask him to teach you how to fold a paper airplane.

All diagrams for creating a paper airplane

This species with wide wings soars smoothly and high above the ground. The option is somewhat reminiscent kite. By attaching a small paper clip to the long nose of the paper creation, you can balance the front and back of the airplane (it will take a few tries). By the way, this little secret Works with all airplanes with an overweight part.

Another species has a blunt nose and is highly resistant to collisions with walls, furniture and other aircraft. Both of these species fly very smoothly. It is important to remember to carefully press the paper with your fingers. Ask your child to do this with his fingers or roll the pencil with his palm (the ribbed sides will simultaneously massage his hands). Combining the game with finger exercises is both fun and useful at the same time.

Paper origami: airplane

Designing a paper airplane using origami technique is a fun activity, especially if you have a little helper nearby. The model is simple, quick to make and perfect for first attempts at learning origami. Shall we try?

Another simple type of origami airplane in the video below. Try to build such a plane without mistakes the first time while competing with your child. You can give in and cede victory to the child.

Little Eagle Airplane: how to make it out of paper

This model is familiar to everyone from their youth and childhood. The simplest model, it is easy to modify and improve, following the trail of imagination. How to make a paper airplane in the easiest way:

take an A4 sheet (if a small customer wants a large plane, newspaper sheets or Whatman paper will come in handy);
place the sheet on the table and bend the corners towards each other, as shown in diagram number 1;
carefully press all the folds and fold the resulting structure in half (image No. 2), then bend the right and left corners again towards each other, leaving a distance, that is, connecting only the ends (image No. 3);
we are almost finished: we fix the connected corners with a tail that sticks out under them (Figure No. 4) and fold the entire structure in half (to be sure, you can even glue the tail with a glue stick) as in Figure No. 5;
All that remains is to decorate the wings of the paper airplane by bending them in half (Figure No. 6) and you can carry out the first tests.

You can decorate the plane with color together: turn the toy into a military fighter with real paratroopers or glue on New Year's rain to please your daughter who loves glitter.

Tip: If the plane turns out to have a heavy nose and does not fly far (as if stuck down), bend its nose down a little, use scissors to shape the tail and some kind of wing stabilizers. The picture below shows several options for how you can use little tricks to extend the flight of your child’s new flying friend.

DIY paper airplane Swift made from paper

To figure out how to make a good paper airplane called Swift, you will need some skill and practice. Step-by-step instructions to build another ideal, but rather complex super-airplane.

This medium difficulty model was a little difficult to assemble, right? We have already collected some amazing models that your child will love, get some more paper ready for experimentation. By the end of this article, your little one should be ready to attack enemy forces at the head of his own air force.

Conclusion

We hope that today the children's battle with combat aircraft took place. No, even an entire army of combat aircraft! Each of the models is interesting and unique in its own way. Some you’ve already seen, some you’ve tried for the first time. The main thing is that attention was paid to our small pilots. For experienced and inveterate creators, we offer to cope with a difficult task. In the video it is given detailed instructions: how to make a real powerful F-15 fighter from a sheet of paper. But this plane already belongs to a high level of complexity and only a patient and skillful student can cope with the task. Shall we try together?

More interesting things on our website.

Making a paper airplane that flies well is easy. You need to follow the step-by-step instructions and smooth out all the bend lines well.

Every person has childhood memories associated with making paper airplanes. We loved making them with our own hands and then launching them up
Many children have a craving for creativity. If they make airplanes on their own, this will help develop the baby’s fingers.
The child will learn to concentrate, think creatively and use imagination. For children's, you can arrange a competition between children to see who can make an airplane the fastest.

Important: Working with paper is a pleasure - it is soft and pliable. A model with regular and even curves will be able to fly high and will keep its shape for a long time.

How to make a paper airplane, step by step instructions?

Such a paper “flight machine” can be made from any paper: printed A4, notebook page or even newspaper.

Important: Try to learn how to make simple layouts first, and then move on to complex ones. Kids love to do origami, so they will be happy to help.

So, if your little one comes to you with the question: “how to make an airplane out of paper?”, prepare a small piece of paper and follow the following steps. Step by step instructions:

1. Place the paper piece with the smaller side facing you

2. Fold the sheet exactly along the center line and make a mark in the center. There will be a bend, no need to smooth it out

3. Open the piece of paper and fold it so that the top corner touches the center

4. Do all this with another corner of the sheet

5. Open the sheet again. Now fold the corners, but so that they do not touch the center

6. Now fold the smaller corner. It will serve as a holding element for all the corners folded earlier

7. At the last stage, bend the resulting product along the center line - the triangular part will be visible from the outside. Fold the sides towards the center. That's it - the plane is ready

How to make a cool paper airplane?

Cool paper airplane "Glider"

After you have learned how to make classic paper layouts, you can try folding something unusual and complex. The Glider airplane will maneuver high and far.

So, how to make a cool paper airplane? Step by step instructions:

1. Take a piece of paper and fold it in half

2. Then open it to its original position and place it with the fold facing up. Fold the corners of the paper inward to create a mark in the middle of the sheet. Now the triangles will be even, and this will help make a layout with good flying qualities

3. Draw a visual line in the center and make a bend in this place. You will get a sharp nose of the product

4. Fold the spout so that it extends a couple of millimeters beyond the edges of the corner bends.

5. Fold the product in the center so that back side ended up inside

6. Bend the wings - they can be made small or, conversely, hollow. Experiment with the width as you wish. That's it - the plane is ready

Make a military plane out of paper?

The layout of the “Hawk” model is a little more complicated. But you have already learned how to make simple models, which means you will be able to fold this paper sample.

Step-by-step instructions on how to make a military aircraft out of paper:

1. Prepare a piece of paper and place it on the table with the smaller edge facing you

2. Fold along the center line. Fold the top corner. The top of the paper sheet should coincide with the side. Do the same with the second corner element

3. The piece should look like a cross. Press its side elements to the center line of the paper and iron all the formed lines. Fold the upper right corner so that it is flush with the top of the sheet. There should be 1 centimeter left from the fold to the midline. Repeat the same with the other side

4. The result is “horns” that need to be folded in half, and the excess paper should be folded inside

5. The bottom corner is turned in the opposite direction from you. Make a fold line to the point where the “horns” emerge

6. Fold the airplane in half - it's ready. Paint it with paints and you will get a real military fighter

Important: You can make other models of military aircraft using the drawings presented below.

How to make a light airplane out of paper?

If your child constantly asks to make a paper airplane, teach him to fold it using the origami technique on his own. The diagram below will help you make a light paper airplane.

Tip: Follow the drawn instructions with your child. He will love making these airplanes, especially from colored paper.

How to make a simple paper airplane?

Here is another option for a lightweight model. Many people often wonder: how to make a simple airplane out of paper?

Important: This diagram will help you fold the product in 10 seconds. As a result, you will get a well-flying paper model - simple, fast and interesting!

How to make an airplane with a paper propeller?

To fold such an airplane, you need to prepare a sheet of paper, a paper knife, a pencil, and a needle with a bead at the end. Step-by-step instructions will tell you how to make an airplane with a paper propeller:

1. Take a flat sheet and fold it diagonally twice

2. Open the piece of paper and fold it along the line that will divide the diagonals into two parts. Open the sheet again, raising the corners along the resulting lines

3. Turn the left edge of the corner to the right and bend it. Return it to its original position and bend the right edge upward

4. From the left edge, make a bend again - the bottom should lie on the bend line of the triangle that was made at the previous stage. Bend the edge of the corner behind the resulting part

5. Unfold the right side and bend it towards the center

6. Make another fold towards the center, and tuck the top of the corner inward

7. Bend the right side towards the center, then straighten it again. Turn the left corner over and tuck the bottom edge into the hole on the right piece

8. Bend the resulting product in the center and fold the wings

9. All that remains is to make the propeller: take a sheet of paper measuring 6 cm x 6 cm. Draw it diagonally with a pencil. Make cuts along the drawn lines, not reaching the middle 7 mm

10. Fold the propeller through one corner and secure with a needle and bead

Important: The part may move apart, so glue the corners in the middle or smooth the propeller where it bends

11. Attach the part to the “tail” of the aircraft. The product is ready, you can launch it or give it to a child

How to make a boomerang plane out of paper, diagram?

There is another model of a paper “flying machine” - a boomerang. Imagine a product made by yourself that comes back to you after launch.

Scheme and step by step instructions will tell you how to make a boomerang plane out of paper:

1. Fold a piece of paper four times and press on the corner with your finger

2. Bend one half of the paper cut to the center line and push the corner onto the quarter of the paper

3. Fold the sheet inward from the quarter fold to the top corner. You will get a bend in the form of a triangle. Press your finger along the edge

4. Straighten the triangle, and lifting it, insert your finger between the resulting parts. This is necessary to make sure that the folds are folded perfectly evenly.

5. Turn the product over and bend the other side of the triangle inward. Fold the wide end of the paper in the opposite direction

6. Do all this on the other side of the product

7. It turned out to be a “pocket”. Lift the top and fold it so that the edge lies evenly along the length of the paper. Place the corner in the “pocket”. Bend the top corner down

8. Do the above step on the other side of the plane - both sides should look the same

9. Fold the part on the side of the “pocket” upward. Do the same on the other side.

10. Open the product and place the leading edge inside. Protruding sections will appear in front - bend them. Remove the rear fin-shaped parts that appear

11. Turn the product over and fold the front part. Fold in half and iron the folds

12. Make the fuselage piece: Fold one side of the piece down along a line that runs parallel to the center fold. Do the same with the second side.

13. Fold a small piece of one and the other wing upward. Unbend the product. It already has a base and flat wings

14. Run your fingers along the front of the wings to create a curve. The plane is ready and can be launched

How to make a fast paper plane?

The paper airplane will fly quickly thanks to its folded tail in a special pattern. The nose of such an aircraft should be sharp and thin.

Below are step-by-step instructions on how to make a fast paper plane:

1. Bend a sheet of paper lengthwise. Unfold it

2. Now fold the sheet in half. From the middle, fold both edges down, and then straighten half of what you folded

3. Unfold the sides that are located on the side and fold each flap inward. First do this with the inner lapels, then with the outer ones.

4. Bend some of the wings back. Bend the wings from the bottom a short distance

5. Run your finger or ruler along the fold line and straighten the wings

6. Fold the resulting folds parallel to the folds of the wings. The plane is ready

How to make a good flying paper plane?

Any paper airplane, if folded correctly, will fly well.

Tip: Carefully iron all bend lines with hard objects or fingers.

Tip: To make origami products, use only flat sheets of paper.

If a child comes up to you and asks how to make a paper airplane that flies well, advise him to make a product with flaps or a complex “tail.” Such models fly far and high.

Important: The patterns for these models are described above, so you can start creating on your own or with your child.

How to make a fast and easy paper airplane: tips and reviews

As you have seen, there are many ways to make paper airplanes. It's easy to make a fast and light paper airplane. Tips and reviews will help you avoid mistakes and become an origami master.

Tip: If you are new to origami, try to make only simple models at first. When the paper begins to “listen” to you and you feel that the airplane models fly well, then begin to master more complex and unusual models.

Important: Before you start making the plane, prepare your paper. Prepare several sheets, as at first it will be bad for you - everything comes with experience.

Tip: Do not use wrinkled sheets of paper. An airplane cannot be made from bent and torn sheets.

Tip: Try to keep the product symmetrical about the axis (imaginary or real). If this is not observed, the plane will fall on its side during flight.

Make several models and organize a real air show on the street with your child. Remember your childhood - fly a paper airplane!

Video: Paper airplane

A paper airplane is a wonderful symbol of carelessness, childhood, and many positive memories. There is hardly a person who has never used paper fighters and bombers in the corridors or classrooms of a school. If you decide to remember your youth, show off to the younger generation, or simply relieve stress, then you should definitely know how to make a paper airplane so that it flies far and high. You will need several sheets of medium-weight A4 paper, the desire to assemble your own aircraft fleet, plus a little imagination.

Standard aircraft

A good, reliable plane that glides beautifully and also hovers in the air for quite a long time. Lightweight and durable thanks to a double layer of paper in the nose and a balanced center of gravity.

Lay out a standard A4 sheet, bend it in half lengthwise, and then return it to its original shape. You now have an approximate midline. Bring two corners of a sheet of paper to this line - this is the future bow. Now step back 1.5 - 2 cm from the curved edges, draw a conditional line and fold the sheet across it. Bring the top corners of the sheet to the middle again. Fold the resulting “tongue” from the first layer of the bow over the second, thereby fixing the structure. Fold your model in half along the center line. Now all you have to do is fold the wings as shown in the diagram, and your plane is ready!

Classic fighter

A standard model of a fighter plane made of paper, known to absolutely everyone. It has proven itself to be easy to perform, fast speed and long range. It is on this model that increasingly complex products are based.

Just as in the first case, bend and straighten a sheet of landscape paper lengthwise, then bring the upper corners to the middle line. You have formed a sort of triangle where the sheet is folded. Take the corners at the base of this triangle and bring them to the midline, as shown in the figure. After this, you can turn the resulting workpiece over and fold it in half along the longitudinal line. Now all that remains is to make the wings: bring the upper corners of the paper on each side to the middle, then straighten them to an angle of 90 degrees.

Supersonic aircraft

If the standard models in your fleet are not enough for you and you want to do something unique, then you can opt for a more complex and sophisticated model of a supersonic fighter that can fly far and high.

Here you will need to mark the middle line by folding it not along, as before, but across the sheet of paper. Bring the corner edges of the sheet to the midline, then bend the future nose part across, bringing the top of the nose to the midline in the tail part. Step back 1 - 1.5 cm from the last fold, then bend the nose part in the original direction, as shown in the figure. Now fold the future aircraft in half lengthwise and bend the future wings. To stabilize the flight and impart the necessary aerodynamic properties on the dock edges of the wings, make a fold of paper facing upwards.

Spy plane

Another rather complex, non-standard model that will delight you with unexpected aerial tricks and flight paths.

Place a landscape sheet across in front of you. Mark two bisectors coming out from the bottom corners of the paper, then fold the sheet along them, as shown in the figure. Now do the same manipulations with the future nasal part previous model: bring the tip of the spout to the center of the tail, bend the spout again into reverse direction, retreating 1 - 1.5 cm. Now bend the body of the plane lengthwise, make wings. In this case, the wings should be large enough, which will ensure long-term planning models in the air.

Intercontinental liner

In 1983, American resident Ken Blackburn created a model of a paper airplane, with which he set a world record. The plane stayed in the air for almost 30 seconds. You can also create your own aircraft. With this module, even if you don’t get into the book of records, you will definitely surprise all your friends.

Take a standard A4 sheet and place it lengthwise in front of you. Fold its sides as shown in the picture. Make sure that the bent corners do not touch each other and that a distance of 3–4 cm is maintained between them! Now fold the top edge 2 cm, smooth it out, repeat this procedure. You need to perform 9 - 10 such folds. Now bend the future plane in half, bend the wings, leaving only 2 - 3 cm on the body of the plane. To give the appropriate aerodynamic characteristics, bend the outer parts of the wings upward.

Now you have mastered all the secrets of how to make a paper airplane so that it flies far and high, shows aerobatics and amazes with its speed. If you wish, you can put a name on the wings or fuselage of the aircraft, find or print paper with all sorts of designs that will give your crafts an additional zest.

Probably everyone knows how to make a paper airplane. Of all the toys that have ever existed on earth, these products are the most popular. The cost of making them is minimal - you just need a sheet of paper and a minute of time, and they bring a lot of joy.

Winged origami from childhood

We bet that you already want to remember your childhood. You just have to start, fold a sheet of paper in half, and then your hands will remember what and how to do. For those who have forgotten how to make a paper airplane, instructions are included.

Take a rectangular sheet of paper, fold it in half, iron out the bend, return it to its original position and turn it over.
Now you need to bend the top corners towards the center, and then bend them again, as shown in the picture above.
We make the airplane along the existing bend line, fold the wings in half, each in its own direction.
The craft is ready.

This classic airplane model is called a glider; it can be made either with a sharp nose or without it (by bending the corner down at the stage shown in the fourth picture in the diagram above). By following the instructions above, you will make a plane that flies well.

It would seem like a simple children's game, so why complicate it? But there will always be people who, as they say, do not look for simple ways. You will be surprised how many fans this paper friend from childhood has, how much imagination and perseverance people show when trying to create the perfect airplane!

We'll build the plane ourselves

A whole area of origami that describes how to make paper flying airplanes is called aerogami. We will talk about airplane models a little later, but for now we will try to combine the experience accumulated by users and answer the question of how to make a good paper airplane.

The main function of an airplane is, of course, the ability to fly. The lighter the paper it is made from, the better it flies, but this is a relative rule. If, for example, you fly a very light airplane in windy weather, it will simply be blown away by the air flow, while a too heavy one will fly, but not far. It all depends on where you are going to run it, so you will have to connect the logic.

In order for the airplane to fly smoothly, both parts must be a mirror image of each other. If the wings different shapes or size, then, you know, it won’t fly far. To make the airplane more stable, its wings need to be slightly bent at the edges. Real aircraft use flaps for similar purposes.

By the way, for paper airplanes, both A4 sheet and a piece of paper from a notebook, a newspaper page and any other paper are suitable, the main thing is that it is square or rectangular in shape.

The paper airplane must be made using the origami technique, which means no staples, tape or glue. All of this will add unnecessary weight that will make the plane unable to fly.

Fantasy inspires

Paper airplanes are real assistants to the designers of real airplanes, so their modeling and launching have become a whole science. They were first used for such purposes by aeronautical engineer John Northrop in 1930.

Some airplanes are prototypes of real ones, others are simply a figment of the imagination of their creators. For example, the Delta airplane is reminiscent of the legendary Flying Triangle, invented in Germany in the 1930s.

A popular paper model of the Soviet supersonic reconnaissance aircraft Igla is popular. The Russian drones “Korshun”, “Scat”, the French waterborne “Canard” and the fighter “Mirage”, the British bomber “Mosquito” and many others also have their paper copies. All possible models of fighter aircraft are very popular.

How to make a paper fighter plane

We offer instructions for creating a paper model of the Piranha fighter plane.

Take an A-4 sheet, fold it in half, carefully work out the bend line, return the sheet to its original position and turn it over. Fold the top corners as shown in the picture.
Bend the nose.
Fold the edges into a triangle towards the center, you will get a workpiece like in picture 3.
Fold the wings again, but now along the entire length.
For convenience, turn the airplane horizontally. Now you need to bend part of the tail along the line indicated in the picture. We bend each part in its own direction.
Along the line indicated in picture 6, we once again bend each part in its own direction.
We bend the indicated bow parts in both directions.
Straighten the tail.
We bend the corners on both sides of the tail section symmetrically.

We get an unusual fighter model, which is much easier to make than it seems, the main thing is to try it.

Upgrade for paper airplane

An airplane made from a white piece of paper is somehow boring. You can use your imagination and figure out how to make a cool paper airplane that you’ll want to keep or give to someone as a souvenir. Why not, for example, use colored paper, because this will make the aerogami brighter. Only in this case, the colored side of the paper must be placed down so that the uncolored part ends up inside the finished airplane.

And the plane can be “upgraded” with various inscriptions, painted with pens or pencils. It is better not to use paints, as the paper will get wet and the plane will hardly be able to fly.

As a gift, you can give an airplane made from a dollar bill.

This product is sure to make an impression. If you want to impress, ask yourself how to make a paper airplane out of money.

Flight to the record

Airplane launching is considered a sport, and even international competitions are held in it. The founder of one of these competitions called Red Bull Paper Wings was Briton Andy Chipling. In 1989, it was he who founded the Paper Aircraft Association. As a founder, he established the rules for creating and launching airplanes at the competition. To make the model, you could use an A-4 sheet; it was forbidden to make cuts or glue the paper together.

Participants still compete in three areas:

whose plane will fly farthest;
whose plane flies longer;
whose flight is the most spectacular.

The achievements of some participants even made it into the Guinness Book of Records. Japanese participant Takuo Toda set the record for the longest flight, his paper plane stayed in the air for 27.9 seconds. Another record holder, Joe Ayuba from America, knows how to make a paper airplane that can fly the longest distance. The record he set is 69 meters 13 cm.

A paper airplane will help you get closer

Let's say a banal phrase, but times change, and we change with them. Our children prefer to spend hours on their gadgets; they have little interest in the activities that we loved so much as children.

One day a funny situation happened at a children's camp. Poor children, separated from their phones and computers, had absolutely no idea what to do with themselves. In order to somehow improve the situation, the counselors decided to teach them games that they themselves played in childhood. Just imagine two women doing rubber band jumping and teaching 10-year-old girls how to do it! Now go up to your child and ask if he knows how to make a paper airplane with his own hands?

We sincerely hope that the answer will be positive, but even if not, it can be taught very quickly and easily. Offer to compete to see whose plane will be the most beautiful, fastest, brightest, biggest, or whatever you want. Spend quality time together, your child will definitely appreciate it!

On the wings of love

On the wing of a paper airplane you can write a declaration of love to your soulmate or just kind words friends or parents.

Here it is, it would seem, an ordinary piece of paper, but in fact it is a valuable artifact that stores our memories of childhood, capable of giving us positive emotions, and for some it can become an exciting hobby or even a lifelong pursuit.

Absolutely, each of you made small aircraft in childhood - airplanes, helicopters, various weather vanes. At the same time, hardly anyone thought that making paper products is a fairly ancient Japanese art called origami.

That part of this truly fascinating science, which explains how to make various (schemes): fighter, bomber, light glider and many others, is called aerogs. The existing models are so diverse that it is simply not possible to describe and study them all.

Where did the paper airplane come from?

If you put it aside Japanese history development of origami and turn your gaze to Europe, you can see that paper airplane models - their diagrams remain relevant today - Leonardo da Vinci loved to build. Using parchment, he made one of the first airplane models. A little later, the Montgolfier brothers built a paper model hot air balloon. By the way, paper ones are very popular and today, filled with warm air from a burning candle, they can rise into the air a considerable distance.

John Cayley is considered the inventor of the first glider models. He made such airplanes from flax at the beginning of the 18th century; they were supposed to be launched manually.

Despite the fact that the earliest mention of flying models dates back to 1909, paper crafts are also very popular today. Children begin to assemble airplanes, the designs of which are amazing in their diversity, at the age of 4-5, and for some this hobby remains relevant throughout their lives.

Glider

One of them is enough simple models, which each of you folded in childhood, is a paper airplane (diagram below) called “Arrow” or some kind of “Glider”. This model has excellent flight characteristics and is very easy to make. You can make a paper airplane - the diagram is in front of you - in just six steps:

Place a rectangular piece of paper in front of you and fold it in half along the long side (lengthwise);
bend the corners towards the center of the sheet inwards, thus forming isosceles triangle; try to make the sides as even as possible, the flight characteristics of the product will depend on this;
bend the resulting structure in width so that about 2-3 cm remains from the corner to the bottom edge;
fold the isosceles triangle again, and bend the corner that sticks out from under it upward, thereby fixing the fuselage;
turn the resulting structure over and bend it in half lengthwise;
bend the wings, make them wider or narrower at your discretion, this will determine how high and easily the airplane will fly.

Zilk

This German paper airplane, the design of which is also not very complicated, is very maneuverable and has increased speed characteristics. This is achieved by combining a light tail and a fairly heavy fuselage, as a result the wind is not a hindrance to it.

Origami paper airplane - Zilka diagram:

take a rectangular piece of paper and bend it in half lengthwise (from right to left), then straighten it again;
now do the same from top to bottom, straighten the sheet and bend the top part to the middle (widthwise);
bend the upper corners inward to the center line, the upper part should look like a truncated pyramid;
fold the top part in half from top to bottom, touching the center line again;
turn the structure over with its back side facing you and fold it in half lengthwise from right to left;
bend the upper right right corner downwards and straighten it again;
open the right corner and bend it downwards, while folding the upper part in half back;
make the right wing - to do this, bend the top sheet diagonally to the right;
turn the product over and decorate the second wing;
spread your wings - the plane is ready to fly.

Delta

Another truly flying model. Let's try to make such an airplane out of paper, we have a diagram:

take a sheet of paper (rectangular) and mark the main horizontal axis;
leave a small mark in the middle, dividing the sheet vertically;
divide the left side of the workpiece into 4 equal parts, while bending 2 more lines;
twist the lower part to the central axis and fix the line to the middle, do the same with the upper half;
Now we bend the right side vertically towards the middle of the sheet;
after this, the edge of the workpiece must be bent in such a way as to obtain an angle that starts from the middle of the part and reaches the third bend line (shown in the diagram, Fig. 4);
fold the other edge in the same way;
bend the resulting sharp triangle to the top formed by the sides;
tuck the protruding part of the upper wing into the small pocket you created;
bend the workpiece in half lengthwise along the center line and begin to form the wings.

That's all, the Delta aircraft is ready! Launch!

I would like to add that when making this model it is best to use paper that is not too thick, otherwise you will not be able to lay out the nose lines beautifully and clearly, and this may affect the aerodynamic characteristics of the airplane.

Canard

The next paper airplane, the design of which is a little more complicated than the previous ones, is intended for long-distance flights. Its distinctive feature is the ability to beautifully plan and carefully land on the runway.

So let's begin:

take a sheet of A4), bend it in half lengthwise (from right to left) and then unbend it again to its original state;
bend the upper corners to the central center line, which is clearly visible;
turn the structure over;
bend the side edges towards the center, but there is no need to bend the back part;
fold the central diamond in half, from top to bottom;
fold the top sheet of the central triangle upward, placing the fold just below the previous fold;
bend the resulting product back in half;
lay the top layer diagonally to the right - this will be the wing; turn the workpiece over and fold the second wing of the aircraft.

Spread your wings, the Canard is ready to fly. Of course, some evil tongues say that this aircraft model is non-flying, but who is stopping you from refuting this statement? Make such an airplane yourself and check it out.

Little Nicky

To make such an origami plane from paper, the diagram will be very useful to you, because “Little Nicky” is not so easy to fold, you need to be very careful. This curved wing airplane is very reminiscent of a fighter, it has excellent maneuverability and can reach good speed.

To make this aircraft you will need a square sheet of paper:

bend the sheet in half, and then fold the right and left rectangular parts in half too, you should get 4 equal parts;
bend the lower corners to the first folds and mark the fold lines;
turn the structure over and bend the triangles towards the center;
then the lower acute corner of the figure and turn it down and back so that it touches the upper border of the sheet;
now bend the side parts towards the center;
turn the product over and press on the top edge of the craft, while pulling the layers out;
bend the resulting triangle back as shown in the figure;
fold the airplane in half lengthwise, bend the wings down;
bend the edges of the wings and straighten the airplane.

That's it, baby Niki is ready for long journeys! Let's fly!

Another option

But what if you still can’t fold airplanes, or maybe you just want to try something new?

There is another way to make paper airplanes yourself - print out the diagrams and cut them out finished parts and bend along the suggested lines. By collecting such paper models, you can get a lot of attack aircraft, fighters and bombers no worse than real ones, and if you collect a lot of them, you can organize a personal mini-exhibition that your friends will appreciate.

if you cannot print a color picture, it’s okay - use a black and white printer, and then color the finished plane;
if you want to glue a large plane, then take fairly thick paper, otherwise the parts will be deformed;
for a small airplane, as well as for working out small details, use thin office paper, it is easier to glue;
To ensure that the folds are even and neat, use a metal ruler and;
to beautifully round the necessary parts, use a simple pencil and move it along the workpiece until the edges begin to curl;
white side cuts It’s better to paint over it right away, otherwise they can ruin the look of the finished model;
for work it is better to use transparent glue of the “Moment” type;

Its flight characteristics depend on how correctly and accurately you fold your model airplane. Despite the fact that paper is a fairly light and thin material, when folded correctly, it has sufficient strength and, under certain conditions, can retain its shape for a long time.

Take your time, try to follow the instructions exactly - the more accurately you can repeat the diagram, the better the airplane will turn out.

For a good flight, choose models whose wing area is much larger than the fuselage.

When working, pay special attention to the tail - if they are folded incorrectly, the plane will not fly.

Choose models with curved wings, this will help improve the aerodynamic characteristics of the airplane and increase its flight range.

First flight

All paper airplane models, the diagrams of which are discussed in this article, fly quite well (maybe with the exception of the Canard). However, there are several rules for a successful launch:

make sure that the plane is folded correctly, in exact accordance with the diagram;
carefully check how smoothly and correctly the wings of the model are deployed;
launch the plane upward, maintaining an angle of approximately 40-45˚;
adjust the launch force, it depends on whether your device will glide easily or fly fast enough;

Good luck with your flights, endurance and patience. Making an ordinary airplane out of paper is not a difficult task - the main thing is that it is light, original and truly able to fly.