Small deer made of wire. DIY New Year's deer for a festive atmosphere. Wire deer

We make a deer from scrap materials. If you don’t know how to make a New Year’s deer, choose any method and raw materials that are available to you and get down to business with us.

Wire deer

The most beautiful three-dimensional deer is made from wire and tape. To make such a beauty with our own hands, we will need:

thick copper wire.
scissors;
pliers;
toothpicks;
polyethylene tape film;

Master Class

We begin to twist the frame with our own hands from the butt, folding a large piece of wire in half. We make the hind legs, symmetrically raise both ends to the stomach, the front legs, and the chest. From this point, one end forms the head and neck, and the other cuts circles around it. We attach another piece of wire to the butt and leave the short end - the tail, the long end becomes the spine and is attached to the neck.

You can, of course, make the insides out of straw, cardboard or felt scraps, but in a modern apartment there is always the most ownerless polyethylene. We make large wads of thin film with our own hands for the torso and neck; long flagella for the legs can be wound onto toothpicks. We secure them with narrow tape and wrap them with wide tape.

We make the horns and ear from two pieces of wire symmetrically.

We try on the horns, remove them and wrap them with tape.

We screw the horns into place, wrap the head and tail with tape. The result was a white reindeer.

Deer made from plastic bottles

What our craftsmen did with their own hands from plastic bottles. The material is always available, malleable and free. Now it’s the turn of the ungulates. How to make a New Year's deer from it? In order to make such a charming deer with your own hands, you will need only three plastic bottles: one and a half liter, a large 5 liter and any for the ears.

Burn holes in a large plastic bottle for the legs, and in a small one for the neck.
Drive 4 sticks into the ground and place the torso on them.
Put your neck in, put your head on.
Attach the ears cut from the third plastic bottle with a stapler.
Make horns from tree branches. You can make them from cardboard, but not for the street.
Paint a fawn using plastic bottles and throw a bunch of straw near its hooves.

Felt deer

To sew a felt deer you will need:

pieces of felt in three colors;
threads, needle;
lace;
a little filler;
lace.

We start sewing the tilde head from a felt pattern. Immediately sew a nose onto the muzzle, sew a mouth using red thread and draw eyes.
We sew together two halves of felt, not forgetting to insert the felt antlers, lace and filling between them. If you want a rigid felt craft, insert a cardboard frame inside.

Straw deer

Well, there’s a lot of straw in the village. The same amount as there are plastic bottles in the city. It is interesting to make a figure of a deer from wood and straw with your children.

Make a frame from tree branches by tying them with rope.

Take bunches of straw and apply them to the branches, generously wrapping them around them with twine.

We make the ears from two identical bundles of straw, folded in half. Eyes will be made if large black beads or buttons (nuts, bottle caps, etc.) are glued or sewn to circles made of cardboard, felt or small plastic cover and secure with twine. Our handsome straw man's horns are made from bare tree branches.

Cardboard deer

It's scary when the head of a dead deer hangs on the wall. This means that either the owner killed a beautiful animal with his own hands, or... in any case, there is a corpse in front of you. But when you see a deer’s head that someone has made with their own hands from wood or cardboard, a feeling of admiration, respect and slight envy appears.

Don't be jealous, you can do no worse. This video shows very quickly all the elements that make up the face, neck and horns. The good thing about the video is that you can stop it and copy the craft. Then cut it out of cardboard, put it together into a puzzle with your own hands, attach it to a piece of wood, and hang it on the wall.

New Year's deer do it yourself - this is what you can do to decorate during the main winter holiday. Such a craft will definitely not go unnoticed, because a homemade deer always looks creative and beautiful.

Below we will describe step by step how to create various New Year's crafts and decorate the holiday with them. The deer stencil is made from cardboard, but if you don’t have it, you can use plain paper. The paper will make a large Christmas reindeer that you can hang next to the garlands.

So, the work flow is as follows:

When creating any stencil, it is important to draw correct template. For those who are doing this for the first time, it is recommended to choose a simple drawing, since elements such as, say, the head or horns of an animal will be quite difficult to draw. So, after the sketch of the future craft has been selected, you can begin to create the stencil itself.
When drawing, it is recommended to use a pencil, as it can be erased at any time. Once a person is happy with their graphic design, they can use a marker to trace its outline. As an alternative, you can use a ready-made template by printing it from the Internet. Or another way: you can take a stamp from a press. However, you need to take into account the fact that usually such seals are small, so if you want to create a large stencil, it is better to draw the outline yourself.
Now you need to decide what kind of paper stencil will be, single-layer or multi-layer. If the future craft will be black and white, then it is recommended to make one layer. At the toy making factory, stencils are made multi-layered, because this way the craft will be stronger. You can also get more sophisticated and create such a craft from foam plastic.
The drawn and colored image on paper (cardboard) must be copied onto thin tracing paper. It is important to ensure that all its details are reflected well on the tracing paper. Now you need to draw the outline of the drawing again. You can use copy paper instead of tracing paper.
At the last stage, you need to use a penknife to cut out the stencil. This should be done strictly along the contour.

Tip: Stencil Christmas decorations made of plastic. A hole is made at their top through which the thread is threaded. The toy can be hung on a Christmas tree.

Gallery: DIY New Year's deer (25 photos)

New Year's deer: ideas (video)

DIY paper deer head: how to make?

A large paper deer will certainly decorate the New Year!

You need to do it like this:

First you need to collect everything you need: color and White paper, scissors, ruler, sharp tool such as scissors or a knitting needle, tape and glue.
To create such a craft you will need about 15 sheets of paper.
The work begins with the selection of beautiful drawings. It must be depicted on paper and cut out. Now all the images need to be bent so that they can be glued together.
To press the groove, use a ruler. It must be applied to the bend line and drawn along it with a sharp object.
The parts must be glued carefully so that the glue does not stain the paper.
You need to secure a thread or rope in place of the animal's neck. This can be done using a small piece of tape.

How to make a deer from wire: diagram

Getting a beautiful wire Christmas toy requires some creativity and sophistication.

So, the action plan is as follows:

First, it is important to decide what size the deer will be and why it is being made. If you want to make a New Year's toy, just take one sheet of A4 paper to create a layout. But you can also make a large deer from wire, which you can put on the street and decorate with a garland. It will look great! The choice remains with the creator, especially since the operating scheme is the same.
Once the size has been chosen, you can begin creating the layout. On a sheet of paper you need to draw the profile of the animal, the horns are drawn on a separate sheet. This is necessary for wire modeling.
Now you need to use wire to perform precise modeling according to the drawing. You can apply it to the paper to prevent deviations. The wire needs to be twisted. Two identical wire simulations should be made.
Now both simulations should be fastened together. It is recommended to do this in the tail area by twisting the wire. As for the other sections of the deer, to hold them together you need to cut a small piece of wire and use it as a hook for the two parts. This way, there will be a distance between the two wire models and the toy will not be flat.
The horns of the animal are wrapped with wire to the head, after which the entire deer must be wrapped in it. It is recommended to do it carefully circular movements with this material.
If you want to give your craft an LED effect, you can attach a garland to it. You will get a beautiful glowing deer made of wire.

Christmas reindeer made of cardboard: how to make?

First you need to draw a model of the future deer on cardboard. The head of this animal made from this material looks very beautiful, so the method of creating it will be described below.
It is recommended to print the templates on a printer first. In each part, it is important to make a strip in the center - this is the future cut for fastening.
Each paper piece must be attached to the cardboard using double-sided tape. It is not recommended to use glue for this.
Then each part must be carefully cut out along the contour with scissors.
After this, you can make slits in them. For convenience, it is better to use a knife.

Once the slots are ready, you can begin assembling the deer. The parts are attached one to one.

Deer Costume: Simple Pattern

In handicrafts you can stick to fashion trends, or you can be creative and create a toy that no one else has! A New Year's deer is, of course, great. However, even it can be brought to perfection by decorating with available materials. Below we will tell you how to make festive costume for this New Year's toy.

As “clothing” for a deer toy, you can use cotton wool, lollipop packaging, Christmas tree rain, knitting yarn, and so on. There are a lot of ideas - if only there was a desire!

To do this you will need glue, cotton wool and colorful Christmas tree rain. You can also use glitter.
First you need to tear the cotton wool into small pieces so that it resembles snow. Then, using glue, you need to attach it with glitter and rain. There is no need to pour too much glue, as it will leave unsightly marks when it dries.
The sticky “mixture” should be mixed well and applied to the toy. It turns out very beautiful craft!

If you want to make a deer costume for a child, then ordinary gloves will do just fine as antlers.

And if you want to make such a costume for a small child, then you can go the simplest way. The body of the deer will be a brown overalls, but the horns can be made from gloves into which you need to put cotton wool. The gloves are attached to the hat using thread or a stapler.

How to make a New Year's deer with your own hands from polystyrene foam?

Styrofoam makes a very beautiful winter deer! Another advantage of this method of creating a toy is its simplicity.

Here's the plan to follow:

The foam used to create a deer must be clean, otherwise the toy will look ugly.
Before starting the craft itself, you need to outline a rough work plan: the size of the craft, its thickness, and so on. Then you need to take several pieces of thin foam and draw a model of the future toy on each of them.
After this, the model is cut out with a knife and the two parts are glued together.
To make the toy beautiful, it must be decorated with glitter and cotton wool.
Using red knitting yarn, you can make a scarf and hat for a deer.

Also, as an alternative, you can mold a deer from plasticine, crush the foam and sprinkle it on the animal. It is necessary to use white plasticine, because for the New Year you need to make winter deer. This will make the toy even more beautiful! If you make a small craft, you can put it on a stick right in the Olivier dish. This will give festive table atmosphere of creativity.

How to make a deer from cotton wool?

First you need to decide on the size of the future toy. For those who have never done such crafts before, it’s better to start from the very beginning. simple way. So, you need to make a “skeleton” of the future toy. It is made from wire.
After this, you need to deal with the main raw material for the craft - cotton wool. It should be torn into small pieces and crumpled into round balls. Each ball of cotton wool should be attached to the wire using tape. It should be cut into small strips so that it does not catch the eye.
For the horns you need to make separate small balls. This way the craft will look beautiful and neat. To make the toy colorful, several cotton balls can be painted red and attached to the deer’s antlers, alternating with white balls.

Origami: deer (video)

People say that the New Year is a magical holiday of fulfillment of the most cherished desires. So why not give it the magic that you can create with your own hands? A handmade New Year's deer is a wonderful way to prove your love to your family, so it must become one of the main attributes of this celebration.

Good afternoon, today I will tell you about all the ways to make a paper deer with your own hands. If this New Year you decide to take on such a craft, here you will definitely find what you need. This article will provide material for educators kindergarten, will help parents make a deer craft for a school competition. I will also tell you how to decorate a gift in the spirit of a New Year's deer. I'll give interesting master classes on creating a three-dimensional deer from thick paper or thin cardboard. You will also find simple drawings and diagrams for assembling a deer from thick cardboard packaging. And it will be clear and interesting.

Simple crafts with DEER

For children.

The most common crafts in kindergarten on New Year- These are paper applications. This year you can make a New Year's reindeer with your children. Cut out separately the details of the body, horns, muzzle and nose, small elements of the eyes, spots and hooves. You can decorate the deer with a piece of textile ribbon or a thin New Year's garland.

Older children can make the same craft, but in a different incarnation. In the older group of kindergarten, children already own scissors and carefully cut along the contour drawn by the teacher. Then you can give them cardboards with the same silhouette of a deer drawn on them. And the child himself will cut out a cardboard figure. All New Year's paper deers can be hung on a single ribbon - make a garland to decorate a kindergarten. You will get a long team of deer flying forward. You can glue Santa Claus's sleigh behind it - you'll get a beautiful New Year's composition on the wall - for example, in locker rooms, above children's lockers.

You can come up with the configuration of the deer silhouette yourself. For example, make it from rectangles. The children themselves will cut pieces for the body, heads, and long strips for the legs. Figured horns can be given already drawn - for cutting along the contour. The craft can be decorated with a snowball made of cotton wool and small snowflakes from a figured hole punch.

Young children can make a deer based on the teacher’s model using small geometric paper shapes - squares, circles, stripes.

You can look for ideas for deer appliqué among New Year’s pictures and drawings on children’s T-shirts. You can draw funny cartoon deer yourself and use your own sketch to create beautiful bright paper deer appliques.

You can also approach the task of creating an application creatively and use non- colored paper but a regular newspaper. Children will then enjoy painting it with watercolors, painting the body and horns of the deer in the desired colors.

You can implement the same craft in a variety of designs. Here is a deer with a head in the shape of a light bulb, where the antlers are made from the carved silhouettes of a child's hand. An excellent and beautiful craft for kindergarten.

You can make a craft with a three-dimensional effect - where the deer seems to have lowered its head, and the tip of its New Year's cap hangs down.

Discarded material at hand - can become elements of a children's craft in the form of a deer. Cotton buds turn into horns, a red round button or bottle cap can become a deer's nose.

The paper deer craft can be supplemented natural material, pine cones, flower seeds, rough hemp rope. Any interesting texture will only enrich your creative work.

Instead of paper, you can use a new craft material - formiam. The craft turns out light and bright. Such a deer can be hung on a Christmas tree like a Christmas tree decoration.

Postcards with deer

made of paper and cardboard.

Greeting cards can also be decorated with an applique with a paper deer. Works cut out of corrugated ribbed cardboard, as in the photo below, look very nice.

You can embroider a deer on a cardboard card with colored threads - wool or floss in several folds. First, we draw sketches of the future picture on the postcard with weak pencil lines - then we make large stitches along the drawn lines.

Or you can make an openwork MULTILAYER card, where you add a lot of delicate transparent thin-cut elements. To make a postcard with a deer airy and voluminous, you need to place pieces of thick cardboard (from packaging boxes) between the layers of cardboard silhouettes - then these silhouettes will hover above the background of the postcard - as if floating in the air above it. A 3D effect is created.

You can insert elements of unexpected things into a card. For example, a red light bulb that lights up with a light instead of a nose.

Or the round nose of a paper deer can be a candy - for example, a lollipop on a stick, or a round red candy. And then the horns will become candy canes, with red and white stripes.

You can decorate a card with a deer with an applique of dry oak leaves. They are very similar to the branched antlers of a deer. It turns out beautiful and original - from the heart.

Volumetric children's crafts

WITH A DEER made of paper.

We can make a round ball from strips of colored paper. And decorate it as a deer toy. Such balls can be hung on the Christmas tree as New Year's toys. In the New Year's articles on our website, we have already made such crafts-balls from paper for the New Year - in the form of Santa Claus, Snowman, Penguin, etc.. in the article " New Year's crafts for children 103 ideas, I explained in detail exactly how to glue such a ball from paper strips.

And here is another idea for a toy for the New Year tree in the shape of a deer. The toy turns out to be three-layered; between each layer we place beads or a piece of a cocktail straw - this way the layers do not stick together and the craft has three-dimensionality.

Here's another great one volumetric craft for children at school or senior group kindergarten. The body looks like an ordinary oval donut - we bend it in half and get a stable structure. Now all that remains is to glue the head with the horns. Beautiful and simple craft, which is easy for children to make with their own hands.

Craft deer

Folding made of paper.

But here is a very simple and interesting deer craft. It is better to use thick paper. Or thin cardboard.

First, we cut out such a module - with a long neck part. The module, as you noticed, is foldable. The fold line goes along the ridge - the spine of the craft.

On the neck part we make lines with a pencil - in the area of the base of the neck, and in the area of \u200b\u200bthe beginning of the head. We make folds and place the folds at the angle we need onto the fold. If it is difficult to make a fold, you can practice first on a rough piece of paper, or make cuts in this place with scissors, then it will be more convenient to figure out exactly how to bend the module.

Craft DEER

From cardboard rolls.

Here is a craft that can be made from cardboard rolled into a roll. We twist the horns from fluffy wire. We sculpt the eyes and nose from plasticine or cut them out of cardboard.

You can add round cutouts at the bottom in rolled cardboard (as in the photo below), this allows you to decorate the legs of our voluminous deer. And also to inside roll we glue the head. We bend a piece of cardboard in half - one half will be the inner adhesive part, on the other we draw the face of a deer - and glue it to the roll body.

You can use sleeves from toilet paper- paint them with gouache desired color, or cover it with colored paper.

New Year's deer

from packaging cardboard.

Regular packaging corrugated cardboard (from boxes) can be used as an interesting craft material.

Cut out flat parts - body, horns, legs in the form of arches. And then make a SLOT in the body at the TOP (we will insert the horns into it), and TWO SLOTS AT THE BOTTOM (we will insert the legs into the bottom). As you can see, the craft is very simple. The slots need to be made a little thicker so that a fairly thick plane of cardboard can fit.

Using this technique of flat modules that are inserted into SLOTS, you can make a whole large winter or New Year's composition. Decorate your interior with it - place everything on the windowsill or on a table against the wall.

You can buy special children's corrugated cardboard for crafts. And make a paper deer using the ROLLING technique, as in the photo below. We simply cut the corrugated cardboard into narrow strips and roll it into a round shape, or into the shape we need.

New Year's deer

for gift wrapping.

Here are examples of how a paper deer craft can serve as packaging for a New Year's gift or souvenir.

YOU can assemble a box from cardboard - in the shape of a cone, and then decorate it with an applique of a deer's head, as in the photo below. The assembly diagram for the cone box is inside the article. Christmas trees made of paper, there we assemble a cone-shaped Christmas tree box in the same way.

Your gift can be packed in an envelope self made, designed like the muzzle of a deer. Or use a regular brown bag from the store and turn it into a reindeer using cardboard antlers and a pom-pom nose.

The muzzle of a paper deer can be glued to a clothespin - and simply fasten a regular paper bag, as in the photo below.

Or you can use any of the deer appliqués suggested above on a paper bag. It’s also quite simple and beautiful.

You can also turn any ready-made packaging into a deer. Take a tea box - cut off the top, cover it with brown paper - stick an applique of a deer's hooves on the front wall, and a cardboard applique of a deer's head rising above the box on the back wall - and we have an elegant way to give a gift.

These are the ideas for deer crafts made from paper and cardboard that I have collected today in this article. Now you can choose many options for your New Year's work with a festive festive deer. And that's not all... because I cook new article, which will include ideas that do not fit here, DEER WITH YOUR OWN HANDS (44 crafts for the New Year).

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

We make a deer from scrap materials. If you don’t know how to make a New Year’s deer, choose any method and raw materials that are available to you and get down to business with us.

The most beautiful three-dimensional deer is made from wire and tape. To make such a beauty with our own hands, we will need:

thick copper wire.
scissors;
pliers;
toothpicks;
polyethylene tape film;

Master Class

We begin to twist the frame with our own hands from the butt, folding a large piece of wire in half. We make the hind legs, symmetrically raise both ends to the stomach, the front legs, and the chest. From this point, one end forms the head and neck, and the other cuts circles around it. We attach another piece of wire to the butt and leave the short end - the tail, the long end becomes the spine and is attached to the neck.

You can, of course, make the insides out of straw, cardboard or felt scraps, but in a modern apartment there is always the most ownerless polyethylene. We make large wads of thin film with our own hands for the torso and neck; long flagella for the legs can be wound onto toothpicks. We secure them with narrow tape and wrap them with wide tape.

We make the horns and ear from two pieces of wire symmetrically.

We try on the horns, remove them and wrap them with tape.

We screw the horns into place, wrap the head and tail with tape. The result was a white reindeer.

Burn holes in a large plastic bottle for the legs, and in a small one for the neck.
Drive 4 sticks into the ground and place the torso on them.
Put your neck in, put your head on.
Attach the ears cut from the third plastic bottle with a stapler.
Make horns from tree branches. You can make them from cardboard, but not for the street.
Paint a fawn using plastic bottles and throw a bunch of straw near its hooves.

To sew a felt deer you will need:

pieces of felt in three colors;
threads, needle;
lace;
a little filler;
lace.

We start sewing the tilde head from a felt pattern. Immediately sew a nose onto the muzzle, sew a mouth using red thread and draw eyes.
We sew together two halves of felt, not forgetting to insert the felt antlers, lace and filling between them. If you want a rigid felt craft, insert a cardboard frame inside.

Well, there’s a lot of straw in the village. The same amount as there are plastic bottles in the city. It is interesting to make a figure of a deer from wood and straw with your children.

Make a frame from tree branches by tying them with rope.

Take bunches of straw and apply them to the branches, generously wrapping them around them with twine.

We make the ears from two identical bundles of straw, folded in half. The eyes will be made if large black beads or buttons (nuts, bottle caps, etc.) are glued or sewn to circles of cardboard, felt or a small plastic lid and secured with twine. Our handsome straw man's horns are made from bare tree branches.

Cardboard deer

New Year's deer are the same symbol of the New Year and Christmas as Christmas tree and Santa Claus. True, Reindeer is a Western variant, but this is not important when it comes to holidays and fun.

You can create such a cute symbol of the New Year with your own hands together with the kids. And at the same time, develop their creativity, imagination and create a festive atmosphere.

These animals can be crafted different ways. For example, make horns for your baby with him. You will need a regular headband, wire and a piece of brown felt.

You need to cut out parts for future horns from felt, then lay wire in them, stitch the parts and attach them to the rim. Ready!

And here interesting option related to appliqué and drawing. Using your palms in paint, you need to leave imprints of deer antlers on the paper, and then stick funny deer faces on them.

Or you can cut out the outlined palm from paper.

Or even make a deer from a child's footprint!

Here's another interesting one waste material- ordinary wine corks and fluffy wire(this is sold in craft stores). The eyes are made of beads.

If you do not find such wire, you can use a piece of sisal to make horns. (And here see how to do it.)

The coolest material to make New Year's toys– felt You can sew not only Christmas deer, but also New Year's deer. Draw a deer ballpoint pen on felt. Cut out two parts, sew them by hand or on sewing machine. Don't forget to sew on a string so you can hang the items on the Christmas tree.

Even the smallest children can handle this option. On plastic cups There are eyes and a nose glued on from coffee, and fluffy wire instead of horns.

Regular flower pots have nothing to be bored in winter! Glue the eyes and fluffy nose, make horns from colored cardboard. And the pots themselves can be filled with candies!

The latest craft is made from ribbons. It's super easy to make and turns out super cute!

Delight your kids with crafts in the form of New Year's deer, because time spent with a child is priceless! Especially during the winter holidays!