Schemes of plaits and braids for men's hats. Knitted men's hat: patterns and photos. Video of knitting a men's hat
Head circumference: 57/59 cm
Materials
Yarn DROPS LIMA (65% wool, 35% alpaca, 50 g/100 m) 2 skeins, knitting needles 3.5 mm and 4 mm
Knitting density
21 stitches and 28 rows = 10x10 cm in stockinette stitch on 4 mm needles
Description of knitted hats for men
On 3.5 mm knitting needles, cast on 131 sts, knit in a circle with an elastic band: knit 2 sts, * purl 3 sts, knit 2 sts, repeat from * in the round another 16 times, 44 sts according to pattern A. 1. Knit 10 circles according to the pattern and follow. in the circle, decrease on the first 87 sts by 1 purl. in every second section and then continue knitting 11 circles according to the pattern = 118 sts. Switch to 4 mm knitting needles and now knit the last. 2 loops according to scheme A.2, then next. 76 p. according to scheme A.2, A.1. Repeat pattern A.X 3 times = 21 cm. Then continue knitting according to pattern A.1 and at the same time begin decreasing in stitches A.2:
Round 1: knit 2 sts together purl. in the second of each section with purl. = 95 p.
Continue knitting according to the pattern and at the same time perform decreases in the 7th, 13th and 17th rounds:
Round 7: knit 2 sts together purl. in the remaining sections with purl. = 71 p.
Round 13: knit purl. and the next loop together knits. in every second section = 44 sts.
Cut the thread and pull its end through the remaining loops, tighten the thread and fasten to the wrong side. sides of the cap.
Men's hat with original designIn our harsh climatic conditions, when cold weather lasts for almost nine months a year, it’s time to think about keeping your head warm not only in winter, but also in the off-season.
Why a knitted hat?
It's no secret that lately hand knitting is becoming an increasingly popular hobby again. In this regard, the question of how to knit a man’s hat with knitting needles is very common among girls.
Fortunately, from the variety presented, modern men give the greatest preference to a simple and laconic model, not burdened with excessive decor.
Therefore, knitting a simple men's hat with knitting needles for beginners will not be difficult, and it will only take a couple of evenings.
Nowadays, to help lovers of needlework, there are many videos on the Internet on the basics of knitting with a description of the work. In addition, the diagrams and photos that you will also find below will help you knit a men’s hat with knitting needles.
A knitted men's hat will warm its owner not only with warmth, but also with the care shown, and therefore will serve as an excellent gift for men not only for New Year, but also for any other holiday.
Variety of material colors To create a simple knitted men's double hat pattern, you only need one skein of yarn, five knitting needles and tailor's tape.
Choosing material for a winter hat
It is better to give preference to natural materials such as wool, merino, angora, mohair. It is also permissible to contain a small amount of acrylic in the composition of such yarn.
Synthetic yarn is good for an autumn-spring hat; it is soft, fluffy and washes well.
Yarn color
Choose based on the preferences of the future owner of a man-made masterpiece, giving preference to natural colors - black, gray, brown.
When choosing a knitting tool, pay attention to the fact that they must be almost twice as thick as the thread you choose, otherwise knitted fabric It will turn out too hard and not elastic.
Getting started Before starting work, it is necessary to calculate the number of loops. To do this, you first need to define two parameters:
firstly, the size of the head circumference (minus 2-3 cm) - this will be the width of your future product;
secondly, the distance from the top of the head to the earlobe - this will be the height of the finished product.
The number of loops required to knit men's hats is determined by the following formula: (head circumference in centimeters minus 2-3 cm) * 2. Thus, with a head circumference of 58 cm, you will need to cast on 112 loops.
The set of loops is carried out on two folded knitting needles or on one thicker knitting needle. Next, the cast-on loops are distributed onto four knitting needles, and the circle is closed with the fifth.
Knitting a lapel
From the 1st to the 40th row, the double lapel of the future hat is knitted. To do this, you need to knit, alternating, 2 knit and 2 purl loops. The diagram of a simple 2*2 elastic band will look like this:
Knitting pattern for a simple elastic band Keep in mind that the double flap of a knitted hat makes it not only warmer, but also more voluminous. Therefore, if this model does not suit you and you, for example, knit a hat for the off-season, the lapel can be made single, for this double elastic band It will be necessary to knit from the 1st to the 20th row.
Knitting the main fabric
An example of an item knitted in stocking stitch Once you have finished knitting the flap or elastic, depending on the hat model you chose, you can continue knitting the body of the hat with a double elastic.
You can also continue knitting with stockinette stitch. This knitted pattern is also called “stocking stitch”. To do this, you need to knit all the loops of each row with facial loops.
More experienced knitters can try knitting the main fabric in a cable pattern. Such a pattern on finished product will look like this:
Knitted men's hat with a pattern - “Braid” Please note that in in this case you will need one auxiliary needle. To create a similar pattern, use the knitting pattern below:
Knitting pattern for the Braid pattern Features of the Braid pattern
Attention! Knitting patterns contain only odd rows. All even rows are knitted according to the existing pattern.
That is, in the rows being performed, knit stitches are knitted above the knit stitches, and purl stitches are knitted above the purl stitches.
Regardless of which pattern you choose, continue knitting it 15 cm in height from the lapel.
Reducing stitches and finishing work
When the product reaches 25 cm in height, begin decreasing, for which, at the beginning and at the end of each knitting needle, two loops are tied together, adhering to the pattern of the product. When there is only one loop left in the work, it will need to be tied and secured.
At the end, you need to carefully remove the protruding threads and wrap it in one or two turns according to your idea.
Knitting is finished! This hat is ideal for energetic and confident men.
Video of knitting a men's hat
In this video you will learn how to knit a simple men's hat with an elastic band using knitting needles without a lapel.
Happy knitting and long wear!
This spring my husband puzzled me with the search for a new hat. First, we had to determine what the ideal men's knitted hat is?
- Firstly, the hat must be knitted from natural materials (wool, cashmere) with the addition of acrylic or polyester. Additives should be 30 percent, maximum 50. The wool should be soft, not prickly. If suddenly a man has sensitive skin, then it is better to choose cashmere instead of wool.
- Secondly, the hat should be with a lapel for winter and straight, without a lapel for spring/autumn. This could be a stocking cap or a beanie hat.
- Thirdly, the hat should match the color of your outerwear. Nowadays it is not fashionable to wear black and gray dull hats, bright colors especially for the sporty style that is on trend.
What can stores offer us? Men's hats, knitted or knitted by machine, are preferably sold from synthetic fabrics. Synthetics are of course cheaper than wool and cashmere, so you can make a hat for 100-200 rubles. and sell it for 1000 or more. Seriously, stores are not modest, and if you estimate the cost of yarn and labor, the markups on small accessories, in the form of hats and scarves, are simply depressing. In addition, it is very difficult to find a hat of the required depth and color, taking into account the above requirements.
I can knit a hat with knitting needles, it occurred to me after I calculated the cost of the threads. How much yarn do you need for a hat? 100-150 grams. A skein of good wool costs 200-300 rubles, and cashmere yarn can be bought for up to 500. The first thing I did was come home and start looking through the models knitted men's hats.
So many different knitted men's hats can be found on the Internet:
- beanie hat
- hat with arans
- jaccrad pattern hat
- multicolored hat
- hat with diamonds and braids
- simple hats, tied with an elastic band They also look interesting.
There are many beautiful hats on YouTube that are knitted not only by women, but also by men. Choose good master classes and knit to your heart's content. I couldn’t settle on one model, so my husband got three hats for the price of one in a store. Yarn with good composition and best quality. My husband will wear my hats for more than one season, and of course they will not roll up or peel off.
We present to you a selection of men's knitted hats with diagrams and descriptions. We hope you appreciate them. And if you have been knitting men’s hats for a long time and a lot, send them to our editorial office, and we will definitely publish them.
Knitted men's hat, models from our website
Men's hat and scarf knitted. Works by Valentina Litvinova
Men's knitted hat and scarf set. Work by Valentina Litvinova
Knitted men's autumn hat. Elena's work
Men's earflaps, knitted
Men's hat with earflaps
Set: hat + knitted scarf
Knitted multi-colored hat
Knitted men's hat
Hat, scarf and mittens for men
Super hat for men
Gray hat and scarf for men
Striped hat and scarf for men
Knitted men's hat, models from the Internet
Knitted men's hat from Nadya Kalakina
You will need Thille Swiss Castle blend yarn (60% alpaca, 30% merino wool, 10% acrylic, 50g/75m) - 1 skein for the cap, double needles 2.75 mm, circular needles 3 mm and 4 mm.
interesting selection to the site 20 lungs summer schemes capsMen's hat knitting pattern:
Knitted men's hat, author for_bat
For size 58 I cast on 160 sts. I knitted a hollow elastic band using size 4, then switched to 2x2 elastic and 3.5 knitting needles.
Knitted gray men's hat
Hat size: S/M – L/XL for head circumference: 54/55 – 56/58.
Materials: DROPS ALASKA yarn (100% wool, 50 g/70 m) – 100 g light gray and 50 g dark blue colors, a classic men's hat is knitted with 4.5 knitting needles (double-sided and circular, length of circular knitting needles 40 cm) and 3.5 mm. (circular, length 40 cm).
Knitting density: 18 p.*38 r. = 10*10 cm in stockinette stitch using 4.5 mm knitting needles.
Men's hat knitting pattern:
Knitted men's hat, size 56-60
You will need:
- yarn Lana Gold Alize (50% wool, 50% acrylic; 230m/100g) – 100g
- circular knitting needles with short line 3 and 3.5 cm
- thick needle.
Men's hat knitted video master classes
This video shows detailed master class on knitting a warm men's hat volumetric pattern“oblique loops”:
Men's beanie hat with diamonds
The set is a multiple of 24 loops, for a head circumference of 55-60 cm we cast on 72 loops, yarn 100 g - 240 m (in two threads - 120 m), knitting needles No. 6, for a head circumference 50-55 cm - take knitting needles No. 5. To increase or decrease the size of the hat, you can simply knit the needles half a size or a size larger or smaller.
The video should load here, please wait or refresh the page.
Men's hat with a “plait” pattern
In this video we will knit a men's hat size 56-60 from Alize LANAGOLD yarn, knitting needles No. 3 and 3.5.
The video should load here, please wait or refresh the page.
Knitted men's hat - stocking
Hat for beginners. The hat is unisex, suitable for both men and women.
The video should load here, please wait or refresh the page.
Men's beanie hat
The hat is knitted in garter stitch.
The video should load here, please wait or refresh the page.
Men's knitted Mason's Hat with a pattern of ropes.Description of knitting a hat from designer Carol Feller translated from the magazine “Interweave Knits Holiday”.
Dimensions:
Circumference – 51 (56, 61) cm.
Required materials:
Yarn Studio Donegal Soft Donegal (100% wool; 190 m / 100 grams per skein) – 2 skeins. 
Required tools:
Circular knitting needles No. 3.75 and No. 4, length 40 cm,
set of double-edged knitting needles No. 4,
stitch markers,
additional knitting needle,
tapestry needle.
Knitting density:
34 stitches and 38 rows = 10 cm of cable pattern, made with size 4 needles.
Comment:
The hat is knitted in circular rows from bottom to top.
Technique used:
Add 2 loops from the broach:
use the end of the left knitting needle to lift the thread between the loops (insert the knitting needle from front to back); knit the raised loop and leave it on the left knitting needle, knit the same loop behind the back wall and remove both loops from the knitting needle - 2 loops are added.
Start of knitting:
Using 3.75 needles, cast on 120 (132, 144) stitches.
Place a marker and join the stitches in a circular row.
Next round:
1 knit stitch, *2 purl loops, 2 knit stitches; repeat from * to last 3 stitches, purl 2, knit 1.
Tie 9 cm with an elastic band.
Change the needles to number 4.
1st installation row:
– 10 (11, 12) times – 140 (154, 168) loops on knitting needles.
2nd installation row:
– 10 (11, 12) times – 160 (176, 192) loops on the knitting needles.
Next round:
1 knit stitch, *2 purl loops, 2 knit stitches; repeat from * to last 3 stitches, purl 2, knit 1.
Knit 3 (4, 5) times rows 1-12 of the repeat pattern with strands according to the diagram. 
Knit 1 time rows 1-13 of pattern repeat for the top part. If necessary, switch to knitting with double-pointed knitting needles. There are 40 (44, 48) stitches left on the needles.
Circular series of decreases:
remove the marker, 1 knit stitch, place a marker for the new beginning of the row, - 10 (11, 12) times - 20 (22, 24) loops remain on the needles.
Circular series of decreases:
– 10 (11, 12) times – there are 10 (11, 12) loops left on the knitting needles.
Cut the thread and pull it through the remaining loops. Pull tightly, fasten and thread the thread to the wrong side.
A men's knitted hat should be well steamed. 
When choosing a headdress, most men avoid excesses and pretentiousness. Because the patterns on this knitted hat quite masculine. There are no unnecessary details here, and all decorative elements look appropriate. And most importantly, the hat turns out to be very warm and comfortable. After all, the yarn contains wool and alpaca.
Having knitted such a headdress for your husband or son, you can rest assured that he will wear it. The main thing is to guess the color, and it’s better to ask right away. The elastic holds the hat well on the head, and it does not slip or twist.
Head circumference: 57/59 cm
Materials
Yarn DROPS LIMA (65% wool, 35% alpaca, 50 g/100 m) 2 skeins, knitting needles 3.5 mm and 4 mm
Knitting density
21 stitches and 28 rows = 10x10 cm in stockinette stitch on 4 mm needles
Description of knitted hats for men
On 3.5 mm knitting needles, cast on 131 stitches, knit in a circle with an elastic band: 2 knit stitches, *3 purl stitches, 2 knit stitches, repeat from * in the round 16 times, 44 stitches according to pattern A.1 . Knit 10 circles according to the pattern and follow. in the circle, decrease on the first 87 sts by 1 purl. in each section and then continue knitting 11 circles according to the pattern = 118 sts. Switch to 4 mm knitting needles and now knit the last. 2 loops according to scheme A.2, then next. 76 p. according to scheme A.2, A.1. Repeat pattern A.X 3 times = 21 cm. Then continue knitting according to pattern A.1 and at the same time begin decreasing in stitches A.2:
Round 1: knit 2 sts together purl. in the second of each section with purl. = 95 p.
Continue knitting according to the pattern and at the same time perform decreases in the 7th, 13th and 17th rounds:
Round 7: knit 2 sts together purl. in the remaining sections with purl. = 71 p.
Round 13: knit purl. and the next loop together knits. in every second section = 44 sts.
Cut the thread and pull its end through the remaining loops, tighten the thread and fasten to the wrong side. sides of the cap.
4.3 (86.67%) 3 votes
More knitting patterns:
Men's hat knitted "Zigzag of luck"
Knitting a men's hat with knitting needles complete with a scarf
Men's scarf knitting “For his birthday!”
Knitted men's scarf relief pattern"Ireland"
