DIY paper hat. DIY paper hat: pirate, cowboy and musketeer templates. Photos of paper hats

A hat is a headdress that can instantly transform a person and protect his head from the sun and wind. A DIY paper hat is one of the main attributes of a fancy dress costume. It will help complete any look. You can involve children in creating a hat, turning the process into an interesting game.

How to make a hat out of paper?

An ordinary paper hat consists of 3 parts: the bottom, the brim and the crown. The main work consists of making these parts and gluing them together. The crown is made from a paper rectangle, equal in height to the hat. Its width should also be equal to the hat. Once the piece is cut, glue the rectangle together to form a cylinder and set aside to dry.

To make the bottom of the hat, take cardboard and place the crown on the cardboard. Trace and cut out the resulting circle, adding a couple of centimeters for the seam. In addition to regular cardboard, the bottom of the hat can be made from a disposable paper plate. Make cuts 1 cm deep around the entire circumference of the cardboard circle. Fold the cuts and glue the circle to the crown.

The brim of the hat can be made from a separate sheet of paper by drawing two concentric circles on it: one circle should be 1 cm less than the diameter of the crown, and the second should be equal to the planned size of the brim of the future hat. Make cuts along the entire small circle and glue to the crown.

The finished hat can be decorated with beads, ribbons, sequins, foil, beads, bows, etc. To perfect a paper hat, cover it with glitter film or crepe paper.

DIY paper pirate hat

You will need:

Black A3 paper;
2 sheets of white A4 paper;
Red paper;
Scissors;
Glue;
Black helium pen;
Awl;
Simple pencil;
Elastic band for a hat.

Instructions for making a paper pirate hat:

Make a square out of black paper: take the corner of the short side of the sheet and place it on the other side of the sheet so that the second corner of the short side is folded in half.
Mark the place where the first corner ended up. Following the mark, bend the sheet so that the edges of the sheet on the right and left coincide.
Unfold the sheet and cut along the fold. As a result, you will get an even square. Cut a circle from the resulting black square, rounding the corners.
Fold a white sheet of paper in half. Cut the sheet lengthwise into thin strips, leaving 1.5 cm from the edges. Unfold the sheet and cut it along the folds. You should have 4 strips of fringe. Use a pencil or scissors to curl the fringe.
Glue a whole part of the fringe onto the black circle so that its edges point up. Along the edge of the circle, use a black pen to measure 3 points at equal distances from each other. Make 3 folds from point to point. You should end up with a triangle. Gently push the middle of the triangle up from the bottom, lowering the sides of the triangle and pressing the corners. The result was a cocked hat.
From another sheet white cut out 2 feathers and make a fringe on them. Twist the resulting fringe with scissors or a pencil. Glue the corners of the feathers together. Cut out a skull and crossbones from leftover white paper. Glue the bones crosswise. Cut out a pirate bandana from red paper and glue it to the skull. Glue the finished skull to the bones and draw eye sockets, an eye patch, a nose, a mouth, cracks, etc. on it with a black gel pen.
Glue feathers to one side of the hat and a skull and crossbones to the other. Using an awl, make two holes on the sides and thread the elastic through. In the end, you got it carnival hat pirate.

Paper top hat

You will need:

Sheet of cardboard;
A piece of velvet, satin or black silk;
PVA glue;
Centimeter;
Compass;
Black marker;
Scissors.

Instructions for making a paper cylinder:

Measure the volume of your head. Cut out a bottom of the same size from cardboard - this will be the bottom of the cylinder. Afterwards, start making the crown. Cut it into a rectangle shape at the height you need. Please note that the long side of the crown should be equal to the circumference of the bottom of the cylinder.
Cut out the brim for a top hat from cardboard. Cut the outer diameter to your liking. Carefully cover all cardboard parts of the cylinder with black material using PVA glue. Now, assemble the cylinder parts.
Paint over the remaining gluing areas with a black marker so that no white gaps are visible. If desired, the cylinder can be decorated with feathers, beads, flowers and ribbons. This cylinder can be worn with any carnival costume or just with a tuxedo.

A DIY paper hat is an excellent element of any fancy dress costume. With the help of improvisation and standard manufacturing instructions, you can make a witch, cowboy, mushroom, forester, musketeer, etc. hat. To make an accessory, you can use colored paper or regular cardboard, as well as fabric.

You will find the answer to this question by studying this master.

Master class on making a headdress “Hat for a clown”

Good afternoon, dear teachers!

Today I want to present to your attention a master class on making a headdress.

I work at the House of Culture, and we try to make our own costumes for performing on stage. We use not only dresses, but also, of course, hats, which you can also make with your own hands. I really like coming up with hats and then turning them into reality. You can also make such beauty and use it at various matinees, holidays, performances, etc.

I want to show you a few of my hats, take a look and rate them.

Musketeer hats

I sewed these hats for waltz

Hats for performing in plays:

Blue ocean

Flower meadow.

5. There are, of course, crowns.

I want to ask you - “What is the most interesting, cheerful and kind character at children's parties?”

That's right - a clown. Let us together make a headdress for our clown, as they say, we will complement the costume with an original hat.

First, we need to decide what we need for making the following item:

Whatman paper or hard cardboard,

PVA glue, but it’s better to take Moment glue

Scissors,

Pencil,

Ruler,

Compass,

Fabric of any color (you can use satin, lining, arganza and nylon).

So we have everything prepared, let's start making the hat.

1. The first stage of our work, we must decide how tall our hat will be. I suggest making the hat in the form of a cylinder. So, take a ruler and a pencil, draw a strip with a height of 19 cm and a length of 61 cm. We cut it out using scissors.

2. Now take a compass and draw 2 large circles with a diameter of 12 cm - these are the brims of the hat

and 1 small circle with a diameter of 6.5 cm is the top of the hat.

And cut it out.

4. Then we glue the strip and the small circle together, starting from any side, as convenient for you, and then we glue the two large circles.

With the help of a paper cowboy hat, sombrero or pirate cocked hat, you can originally complement most fancy dress with minimal money and time costs. Instead of typical purchased models, hand-made production involves unique design, perfect proportions and the embodiment of the most non-standard ideas.

In this article you will find five best ideas and paper hat templates, as well as detailed explanations and step-by-step instructions. All that remains is to stock up on colored paper, scissors, glue and the necessary decor.

Cap

Simple hat patterns for beginners opens paper cap, which is quite simple to do:

Fold the sheet in half so that the fold is on top.
We bend the two upper corners towards the center, carefully working out the lines.
We fold the remaining strips at the bottom up on both sides.
We turn the corners in opposite directions.
We unfold the product.

This option is considered a working one, it is made from a newspaper spread and is a great saver during the summer heat or during renovations.

Pirate

When a child wants to feel like a real sea robber, it will be useful to learn how to make a paper pirate hat with your own hands. In fact, the algorithm is simple:

Cut out a square from black paper.
Fold the sides inward to form a circle.
We make the fringe: fold a strip of white paper in half, make small cuts along the entire length and twist it with scissors.
Glue the fringe to the hat along the entire diameter.
We mark three equidistant points on the product and bend the semicircles upward.
We decorate with paper feathers and a pirate emblem.
We fix the elastic band.

The elastic band can be disguised with a beard and hair, making the image even more intimidating.

Sombrero

The main accessory for a Mexican party is the sombrero, a bright headdress with a characteristic shape and bright colors.

Detailed instructions for making similar hat look like this:

Prepare materials (whatman paper, flower pot, decorative rope).
Cover the pot with white paint and let dry.
Turn it over, attach it to whatman paper and circle it.
Inside the circled circle, draw a smaller circle of 3-4 cm and cut it out.
On the left strip, make equal cuts 3-5 cm wide.
Decorate the brim of the hat: cut it in a circle and bend it inward by 7 cm.
Paint the pot and let dry.
Place a strip of double-sided tape inside the pot.
Fasten the fields with the pot.
Color the hat with patterns.
Attach decorative rope.

Cylinder

A master class on paper hats is in demand, using which a top hat is made - a classic headdress, indispensable for gentlemen, wizards, snowmen and even the vampire Dracula. By choosing miniature sizes, you can decorate a lady’s carnival costume with it.

In this case, making a universal hat is simple:

We make blanks from cardboard: the crown (equal to the circumference of the head), the bottom and the brim of the cylinder.
Glue the pipe together.
On the bottom we make cuts 2-3 cm wide along the entire diameter, and in the fields similarly, only along the inner circumference.
We glue the crown with the brim, where the raised cuts act as fasteners.
Similarly, we glue the top of the cylinder to the brim, hiding the notches inside the headdress.
Cover the surface of the hat with cloth or paper.
We decorate as desired.

Dunno Hat

A photo of a hat made of paper, repeating the headdress of the fairy tale Dunno, beloved by many children, attracts with its amazing similarity to the drawn original.

If desired, you can make this accessory yourself:

Measure the child's circumference and draw a circle according to the dimensions.

Step back 2 cm from the circle and cut out.
On a two-centimeter strip, make cuts every 3-4 cm.
Step back at least 25 cm from the inner edge and cut out the brim of the future hat.
Visually divide the previously cut circle into three triangles and cut out one of them.
We make notches on one of the sides.
We roll the cone and attach it to the hat using fastening cuts.
We paint the entire surface with blue paint or cover it with fabric.
From corrugated paper cut out the tassel and “hair” characteristic of Dunno from yellow paper.

It is advisable to complement the fairy-tale image with a blue tie, which is also easy to cut out of paper according to the template provided.

As you can see, most hats are made according to an identical pattern, so often you just need to stock up on an appropriate photo example, patience, try to break the hat down into its component parts and make a beautiful accessory for any occasion.

Photos of paper hats

Have you come up with the idea of making an extravagant costume for a masquerade party and are you looking at a photo of a hat with your own hands? Then this article is just for you.

Here you will learn how quickly and easily you can sew a hat with your own hands for almost any occasion.

Such hats, which are fairly easy to create, can easily become a good replacement for expensive purchased costumes, and at the same time they will look almost as unusual and interesting.

Making a hat from plain paper

Of course, a paper hat is one of the most simple methods add a little variety to your outfit purchased for a masquerade.

Using any scissors, as well as ordinary glue, you can quite simply create an incredible sombrero, which all travelers in Mexico love to buy, a cocked hat, like a pirate’s, or even a beautiful top hat, like a real gentleman’s.

Definitely a cardboard hat is an ideal option for those who do not have a lot of free time, but who would really like to surprise the guests of the event.

Making a hat like a pirate's

If unexpectedly the teachers in the group said that a hat is needed kindergarten for the holiday, don’t panic, even if you’ve never done anything with your own hands before.

First of all, you need to prepare the materials that you will need later: this colored paper preferably white, black or any other bright color to add originality to the hat, an elastic band for the hat, a needle, glue, as well as a felt-tip pen or black pen.

Step-by-step instruction

Draw a square on black paper and cut it out. Please note that the side of the square should be equal to the shortest side of the A3 sheet.

Turn the cut out square into a circle by carefully rounding the corners of the shape.

Fold a white sheet twice the length. Cut the resulting strip crosswise to create a beautiful fringe, it is important not to touch the bottom edge.

Unfold the sheet and cut it straight along the folds. Twist the fringe on each strip a little with a felt-tip pen or marker.

All curly stripes should be glued to a black circle.

It is important to pay attention to the fact that in order for the fringe to look neat, you need to glue it in such a way that all the edges you have folded look exclusively upward.

Directly in a circle, you need to mark three points that will be at the same distance from each other.

From each mark to the next, three folds are made. As a result, you will see a triangle with equal sides. The brim of the hat must be turned up.

When thinking about how to decorate a hat, you can, for example, make two feathers. The technology is similar to the principle of creating fringe.

Note!

For the front part of the headdress, you need to cut out a terrible white skull with several bones. Next, it is painted and glued to another folded field.

All that remains is to pierce two holes in the hat with a needle and secure the elastic.

After this detailed instructions Surely no one will be left with the question of how to make a hat with their own hands.

If you need a hat for a girl for the holiday on February 23, then the ideal option is to create a cap.

How to make a simple cap at home?

In order to make a cap for a child, you will need half a sheet of any old newspaper with A3 format or the most ordinary sheet with A4 format.

Note!

What should be the sequence?

Fold the sheet in half with the short sides facing each other and turn it with the resulting fold upward;
The corners located on top of the resulting figure must be folded down and then towards the center, and then all the folds are smoothed out;
It turns out to be a paper house with a neat triangular roof;
The lower, fairly long rectangular strips must be turned up on each side and the folds smoothed again;
Wrap the triangles that are left loose in different directions and thus secure a homemade hat made from waste paper.

It’s so simple, in just a few hours you can create a rather interesting headdress for a child or for yourself.

All you need, besides materials, is a little imagination and patience in painstaking work.

DIY hat photo

Note!

A hat made of cardboard is a wonderful type of needlework, and a wonderful way to create a real home theater. Mad Hatter top hat, boyish cap, wide brim summer hat– each craft will help in creating an unforgettable image.

Read and find out for yourself!

In order for our headdress to suit the owner’s taste, you need to start with the main thing: take measurements from the child’s head using a flexible wire. Then we draw a wire circle on cardboard and then work with this pattern as a base for future crafts.

A little more about our exercises:

FIRST, LET'S PLEASE THE LADIES

We make a cardboard rectangle along the length of the small circle and roll it into a circle, which we fasten with hot glue. The folds on the cardboard should be perpendicular to the cut line - this way the structure will have greater rigidity.

It's the top's turn...

... and wide fields. A glue gun works wonders!
BEING A CARELESS BOY IS EVERYONE'S DREAM
It's the cap's turn. We put our base circle on a sheet of cardboard and trace it - we have an internal bend for the visor.

We complement the internal curve with the external one - we do it slowly and slowly so that the curves are graceful and neat.

We have two alternatives: we either make a rectangle (as in the previous case), or, if we want the back to be narrow and the front to be wide, we cut out a long cardboard strip with a hump in the middle.

We glue all the parts together with hot glue - and let's go chase the pigeons!
CYLINDER IS A DELICATE MATTER
Our cylinder is not as simple as it might seem at first glance: its base is noticeably narrower than the upper circle. We place our small circle on a sheet of material and outline it with a larger circle. both closed curves - for this you will need a curvimeter, but you can get by with an ordinary watch. You need to do it this way - set the watch exactly at 12:00, place the wheel in a retracted state on the line and draw along its entire length. Count how many minutes on the clock face correspond to the length of the line and write down this number. Now we set the arrows again at noon and draw the wheel along the usual thirty-centimeter ruler. We count the minutes, make up the proportion - the desired value is found.

The time has come for difficulties. Draw a figure on a durable sheet as shown in the figure.
Its upper arc should correspond to the length of the top of the cylinder, the lower one to the opening for the head, and straight lines should go at right angles to both arcs. And again, we advise you not to rush and show calm - patience and work will grind everything down.

We cut out all three, glue them together with a glue gun - we've almost mastered a new craft!