Large selection master classes with detailed description knitting hats for boys of all ages.

Age	Head circumference, cm	Cap height, cm	Bottom/crown diameter, cm
0-3 months	35-40	13	9
3-6 months	42-44	14	10
6-12 months	44-46	15,5	12
1-2 years	46-48	18	13,5
2-3 years	48-50
3-4 years	50-52	19	14,5
4-5 years	52-54
5-8 years	54-56	19,5	15,5
8-10 years	56-58	21,5	16,5
10+	58-60
(small adult)		22	17
average adult		23	18

Important: The table shows average values. More precisely, the diameter of the bottom/crown of the hat can be determined by the formula: OG /3.14, where OG is the head circumference in cm. The depth of the product depends on the model and individual preferences.

A simple light knitted hat for a boy and a scarf: diagram with description

In this part of the article we bring to your attention two simple hats connected by two different techniques: above (from the crown) and below (from the elastic band). By learning how to knit these basic patterns, you can bring the most complex ideas to life.

A simple light hat for a boy with knitting needles (knitting from the crown)

Hat size/head circumference, cm: 48

Important: if you are knitting a larger item, increase the diameter of the bottom/crown to the required size (see the table at the beginning of the article).

To work you will need:
Yarn, color blue. Composition: 100% wool. Weight - 100 g, footage - 140 m. To work, you will need a thread in two folds
Circular knitting needles #4.5

KP - edge loop
IP - purl loop
ISP - purl crossed loop (see photo below)
LP - facial loop
LSP - front crossed loop (see photo below)
N - yarn over
KR - circular row
PR - rotary row

Main pattern:
garter stitch. All turning rows are knitted in LP. Circular rows are knitted according to the pattern (see picture below)

Finish: stockinette stitch or elastic 2x2 (1x1)

Job description:
1. Knit the bottom/top of the hat:
Cast on 7 loops.
1st PR: KP, N, LP, N, LP, N, LP, N, LP, N, LP, N, KP. At the end of the increase there are 13 loops on the needle.
2nd PR: KP, ISP, IP, ISP, IP, ISP, IP, ISP, IP, ISP, IP, ISP, KP.
3rd PR: KP, *2 PR, N (knit alternately from * to the end of PR), KP. At the end of the increase there are 19 loops on the needle.
4th PR: CP, *LSP, 2 RL (knit alternately from * to the end of PR), CP.
5th PR: KP, *3 RL, N (knit alternately from * to the end of PR), KP. At the end of the increase there are 25 loops on the needle.
Knit the 6th PR and all subsequent even PRs, knit the yarn overs with LSP.
7th PR: KP, *4 RL, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 31 loops on the needle.
9th PR: KP, *5 RL, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 37 loops on the needle.
11th PR: KP, *6 RL, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 43 loops on the needle.
13th PR: KP, *7 PR, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 49 stitches on the needle.
15th PR: KP, *8 PR, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 55 stitches on the needle.
17th PR: KP, *9 PR, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 61 loops on the needle.
19th PR: KP, *10 RL, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 67 loops on the needle.
21st PR: KP, *11 PR, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 73 loops on the needle.
23rd PR: KP, *12 PR, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 79 stitches on the needle.
25th PR: KP, *13 PR, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 85 stitches on the needle.
27th PR: KP, *14 RL, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 92 loops on the needle.
29th PR: KP, *15 RL, N* (knit alternately from * to the end of PR), KP. At the end of the increase there are 103 loops on the needle. The diameter of the resulting circle is 13.5 cm (see photo below).

Advice. If you need a larger hat, continue knitting with yarn overs, gradually forming a larger circle.

2. Close the knitting in the KR and begin to form the crown (main part) of the hat.

3. Continue knitting the crown of the KR in garter stitch without increasing.

4. Once the required height of the product has been reached, you can
knit the lapel of the hat. To do this, knit another 4 cm with a 2x2 or 1x1 elastic band and bind off the loops;
tie the ears with ties.

How to knit ears with ties:
1. Determine the width of the frontal part using the formula ¼ of the total number of loops, i.e. 103/4≈28 (always take an even number of loops)
2. Continue working with stockinette stitch. Knit a row in the following sequence: 38 LP, bind off the middle 28 loops, 37 LP.
3. Knit stitch 6 PR. On each turn row, knit 2 stitches together at the end of the row. Be careful: you should remove 3 loops on each side!

3. Determine the width of the back part using the formula ¼ of the total number of loops, i.e. 75/4≈19
4. Knit a row in the following sequence: 28 LP, bind off the middle 19 loops, 28 LP.
5. Continue knitting the ears, working in parallel with two separate skeins of yarn. On each row, knit 2 stitches together at the end of the row. When the number of loops reaches 4, continue knitting without decreasing, knitting cords of the required length.

6. Sew the crown of the hat. Decorate the product at your own discretion.

46-48.

To work you will need:
Yarn, color blue. Composition: 100% wool. Weight - 50 g, footage - 80 m.
Circular knitting needles #4

Abbreviations used in the description:
IP - purl loop
LP - facial loop
KR - circular row

Job description:
1. Cast on 74 stitches on the needles. Distribute the loops to form a circle. The cast-on edge should be located in the center of the resulting circle, and the loops should not twist.

3. Knit according to pattern #1 to the required height. To determine the height of the crown, use the formula: height of the cap (cm) – ½ the diameter of the bottom/crown, i.e.
hat height - 18 cm (see table at the beginning of the article)
diameter of the bottom/crown - 13.5; hence ½ of the bottom diameter is 6.5 cm
crown height, cm: 18-6.5=11.5

4. To knit the bottom/crown of the hat, continue working with stockinette stitch:
Divide the total number of loops by 6: 74/6=12 (+2 stitches in the rest). For ease of work, knit in rotating rows.
1st PR: 10 LP, 2 LP together, 11 LP, 2 LP together, 10 LP, 2 LP together, 10 LP, 2 LP together, 11 LP, 2 LP together, 10 LP, 2 LP together. After decreasing there are 68 stitches on the needle.
2nd and all subsequent even PR: IP.
3rd PR: 21 LP, 2 LP together, 32 LP, 2 LP together, 11 LP. After decreasing there are 66 stitches on the needle.
5th PR: alternately 9 LPs, 2 LPs together until the end of PR. After decreasing there are 60 stitches on the needle.
7th PR: alternately 8 LPs, 2 LPs together until the end of PR. After decreasing there are 54 loops on the needle.
9th PR: alternately 7 LPs, 2 LPs together until the end of PR. After decreasing there are 48 stitches on the needle.
Knit, gradually removing stitches at the end of each wedge, until there are 18 loops left on the knitting needle. Pull the remaining loops together with the cut working thread and secure. Sew the product.

Simple scarf for a boy

You can knit a simple and very practical scarf from leftover yarn.
Main pattern: garter stitch
The width and length of the product are calculated individually.

Video: Calculating loops when knitting a hat. Knitting for beginners #happy_needlewoman

Hat size/head circumference, cm: 48-50 (50-52) 52-56.

Please note: there are different calculations for each size in the description!

To work you will need:
Yarn, green and brown. Composition: 60% wool, 40% polyacrylic. Weight - 100 g, footage - 170 m.
Circular knitting needles #4 and #4.5

Description and diagram

Knitted hat and helmet for a boy with a detailed description

Even very inexperienced craftswomen can knit such a model.

Hat size/head circumference, cm: 52-54

To work you will need:
Yarn, color gray. Composition: 100% wool. Weight - 100 g, footage - 300 m
Circular knitting needles #3

Abbreviations used in the description:
IP - purl loop
LP - facial loop
KR - circular row
PR - rotary row

Main pattern: elastic band 2x2 (see diagram below)

Job description:
1. Cast on 152 stitches on the needles. Distribute the loops to form a circle. The cast-on edge should be located in the center of the resulting circle, and the loops should not twist.
2. Knit a cast-on row of LP. At the end of the row, secure the working thread and the end of the thread from the set of loops with a knot. This way you will get a closed CR.
3. Using the 2x2 rib technique, knit a “pipe” 14 cm high.
4. Upon reaching the specified height, cast off 54 loops and continue knitting PR, focusing on the pattern.
5. Having knitted 12 cm in height from the closed edge, cast on 54 loops (see figure below) and continue working the KR.

6. Having knitted 8 cm in height from the cast-on edge, proceed to knitting the crown of the helmet:
Knit an LP for each pair of loops. After decreasing there are 78 stitches on the needle.
Continue knitting LP: 6 LP, 2 loops together LP, 6 LP, 2 loops together LP, 7 LP, 6 LP, 2 loops together LP, 6 LP, 2 loops together LP, 6 LP, 2 loops together LP, 7 LP, 6 LP, 2 loops together LP, 6 LP, 2 loops together LP, 6 LP, 2 loops together LP. The decrease area on the knitting needle is 70 stitches.

KR with decreases: alternately 5 LP, 2 loops together LP until the end of the KR. After decreasing there are 60 stitches on the needle.
KR without decreases: LP to the end of the row.
KR with decreases: alternately 4 LP, 2 loops together LP until the end of the KR. After decreasing there are 50 stitches on the needle.
KR without decreases: LP to the end of the row.
KR with decreases: alternately 3 LP, 2 loops together LP until the end of the KR. After decreasing there are 40 stitches on the needle.
KR without decreases: LP to the end of the row.
KR with decreases: alternately 2 LP, 2 loops together LP until the end of the KR. After decreasing there are 30 stitches on the needle.
KR without decreases: LP to the end of the row.
KR with decreases: alternately 1 LP, 2 loops together LP until the end of the KR. After decreasing there are 20 stitches on the needle.
KR without decreases: LP to the end of the row.
KR with decreases: 2 loops together RL to the end of the KR. After decreasing there are 10 stitches on the needle.
Tighten the remaining loops with the cut working thread and secure.
7. Trim the hole.

Video: Children's hat-helmet knitted

Knitted children's hat with ears for a boy: diagram

At the beginning of the article, we looked in detail at how to knit a hat with ears from the top of the head. This part of the review presents a tutorial on knitting a model with braids (knitting direction from bottom to top).

Hat size/head circumference, cm: 51-55

To work you will need:
Yarn, color blue. Composition: 100% wool. Weight - 100 g, footage - 210 m
Circular knitting needles #3, #3.5

Abbreviations used in the description:
IP - purl loop
ISP - purl crossed from a broach (see diagram below)
LP - facial loop
LSP - front crossed from a broach (see diagram below)
KP - edge loop
NP - straight yarn over
BUT - reverse yarn over
KR - circular row
PR - rotary row

Main pattern:

Additional pattern: elastic band 2x2

Job description:
1. Knitting begins with making cord ties (see infographic below). Cast-on edge: 4 loops. The cords are knitted in stockinette stitch.

Advice. By working in parallel with two separate skeins of yarn, you will knit completely identical pieces.

2. Once the cord has reached the required length, proceed to knitting two ear parts. For one “ear”:
1st CR: KP, NP, 2 LP, NO, KP.
2nd and all subsequent even PRs: according to the pattern, knit yarn overs with crossed loops (LP or IP - without forming holes).
3rd CR: KP, NP, 1 IP, 2 LP, 1 IP, NO, KP.
5th CR: KP, NP, 2 IP, 2 LP, 2 IP, NO, KP.
7th CR: KP, NP, 1 LP, 2 PI, 2 LP, 2 PI, 1 LP, NO, CP.
9th CR: CP, NP, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, BO, CP.
11th PR: KP, NP, 1 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 1 IP, NO, CP.
13th CR: CP, NP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, NO, CP.
15th PR: CP, NP, 1 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 1 LP, BO, CP.
17th PR: CP, NP, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, BO, CP.
19th PR: KP, NP, 1 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 1 IP, BUT, CP.
19th PR: CP, NP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, BUT, CP.
21st PR: KP, NP, 1 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 1 LP, BUT, KP.
23rd PR: KP, NP, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, 2 PI, 2 LP, BUT, KP.
25th PR: KP, NP, 1 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP , 1 IP, NO, KP.
27th PR: KP, NP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP, 2 IP, 2 LP , 2 IP, NO, CP. Number of loops on the knitting needle: 34.
3. Form the back of the head. To do this, cast on 20 loops between the ears. After combining the parts on the knitting needle - 88 loops (34 eyelet loops - 20 cast-on loops - 34 eyelet loops). Continue knitting the PR with a 2x2 rib. Recommended height of the back of the head is 2 cm (9 rows).
4. To form the frontal part of the hat, cast on 40 loops between the ears and close the KR. There are 128 loops on the knitting needle. Continue knitting the KR with a 2x2 rib. As soon as the height of the part reaches 5 cm (19 rows) from the cast-on edge, start knitting the crown of the hat.
5. For the convenience of working with the main pattern, move the beginning of the CD to the left by knitting five loops with a 2x2 elastic band (according to the pattern). The beginning of the rapport corresponds to the 6th cast-on loop at the back of the head. It is this loop that will later become 1 loop of the KR.
6. To avoid reducing the volume of the cap, make increases according to the following scheme: *1 LP, 1 LSP, 1 LP, 1 LSP, 2 LP, 1 LSP, 1 LP, 1 LSP, 1 LP, 1 IP, 1 ISP, 1 IP, 2 LP, 2 IP, 2 LP, 1 IP, 1 ISP, 1 IP; continue from * (repeat 8 times). At the end of the KR there are 176 loops on the knitting needle.
7. Knit the crown of the hat according to the “Main Pattern” pattern; the pattern repeat will be repeated 8 times. Knit even KRs, focusing on the pattern of the fabric. The height of the fabric with braids is 26 rows.
8. Having knitted the specified number of rows, begin knitting the crown of the hat.

Tip: If knitting the crown while maintaining the pattern is too difficult for you, switch to stockinette stitch and knit the crown using one of the methods described above.

1st CR: remove 5 LPs onto an auxiliary needle while working, 2 LPs together, 3 LPs, 2 LPs together (from the auxiliary needle), 3 LPs, 3 IPs, braid 1x2, 2 IPs, braids 1x2, 3 IPs. Repeat until the end of the CD. After decreasing there are 160 stitches on the needle.
3rd CR: 8 LP, 3 IP, braid 1x2, 2 IP, braid 1x2, IP no.
5th CR: 8 LP, 2 IP together, 1 IP, braid 1x2, 2 IP, braid 1x2, 1 IP, 2 IP together. Repeat until the end of the CD. After decreasing there are 144 stitches on the needle.
7th CR: 8 LP, 2 IP together, scythe 1x2, 2 IP, braid 1x2, 2 IP together. Repeat until the end of the CD. After decreasing there are 128 stitches on the needle.
9th KR: 8 LP, 1 PI, scythe 1x2, 2 PI together, braid 1x2, 1 PI. Repeat until the end of the CD. After decreasing there are 120 stitches on the needle.
11th K: remove 4 LPs onto an auxiliary needle while working, 2 LPs together, 2 LPs, 2 LPs together (from the auxiliary needle), 2 LPs, 1 IP, braid 1x2, 1 IP. Repeat until the end of the CD. After decreasing there are 104 loops on the needle.
13th CR: 6 LP, 1 PI, scythe 1x2, 1 PI, scythe 1x2, 1 PI. Repeat until the end of the CD
15th KR: 6 LP, 1 PI, 2 LP together, 1 PI, 2 LP together, 1 PI. Repeat until the end of the CD. After decreasing there are 88 stitches on the needle.
17th KR: 6 LP, 1 IP, 3 combined LP, 1 IP. Repeat until the end of the CD. After decreasing there are 72 loops on the needle.
19th KR: remove 3 LPs onto the auxiliary needle while working, 2 LPs together, 1 LP, 2 LPs together (from the auxiliary needle), 1 LP, 1 IP, 1 LP, 1 IP. Repeat until the end of the CD. After decreasing there are 56 stitches on the needle.
21st KR: 2 LP together, 2 LP together, 1 IP, 1 LP, 1 IP. Repeat until the end of the CD. After decreasing there are 40 stitches on the needle.
23-1 CR: 2 together LP, 1 IP, 1 LP, 1 IP. Repeat until the end of the CD. After decreasing there are 32 loops on the needle.
25th KR: 2 LP together, 2 LP together. Repeat until the end of the CD. After decreasing there are 16 stitches on the needle.
9. Pull the remaining loops with the cut working thread, fasten, trim the ends.

Knitted children's minion hat for a boy: diagram with description

The minion hat is one of the most favorite models of boys from 2 to 102 years old.

Abbreviations used:
LP - facial loop
LPS - crossed facial loop

Job description:
1. Knit a hat based on the MK presented above. Basic knitting: knit or garter stitch.
2. By and large, the main difficulty arises in the process of decorating the hat. This is where we will stop. The minion's eye consists of several separately connected parts: a white circle, a gray frame, and a pupil.
3. The white circle is knitted from the center using stocking needles:





Depending on the size of the hat, you can stop at this stage or continue further, increasing the diameter of the circle. Close the loops. Sew the piece to the hat. If your minion has two eyes, you need to knit 2 white parts.
4. The gray frame of glasses is also knitted with stocking needles in stockinette stitch.
Cast on row: number of loops = quantity closed loops white part + 5 loops. If you finished with 45 stitches, then cast on 50 stitches (45+5)
Knit 6 rows. Close the loops. Finished part twist with a roller and sew along the circumference of the white circle.
For the pupil, use a button or felt circle.
5. Attach several black threads to the top of the head to imitate minion hair.

Video: Hat for boy Minion Crochet

Ushanka hats are a classic, warm and cozy. The video master class tells in detail about all the stages of knitting a hat with earflaps for a boy (size: 54-55), starting with a set of loops and ending with assembling the product.
If you need a smaller hat for a 1.5-2 year old baby, study the diagram below.

Video: Knitting. We knit a hat with earflaps. Part 2. Knit hat with earflaps. Part 2.

Video: Knitting. We knit a hat with earflaps. Part 3. Knit hat with earflaps. Part 3.

Knitted tanker helmet hat for a boy: diagram with description

Crocheted tanker helmet hat.

If you carefully studied the MKs presented above, knitting the “Tanker Helmet” hat will not be difficult.

1. Knit a standard hat with ears, using the tutorial for knitting a hat from the top of the head. Main knitting: knit.

Please note: the tanker's helmet has a flap in the back of the headdress! You can knit it separately and then sew it onto the hat, securing it with buttons. When unscrewed, the valve will protect the child's neck.

2. Separately knit the overlays: 2 round overlays for the ears, 1 overlay for the forehead, 4 longitudinal overlays. To add additional volume, the linings should be filled with padding polyester or holofiber.
3. Round pads
cast-on row: cast on 9 loops, while knitting, distribute onto 3 knitting needles (3 loops each).
Alternately: 1 LP, 1 LP from the broach. After adding 18 loops on the knitting needles.
Alternately: 2 LPs, 1 LPs from the broach. After adding 27 loops on the knitting needles.
Alternately: 3 LPs, 1 LPs from the broach. After adding 36 loops on the knitting needles.
Alternately: 4 LPs, 1 LPs from the broach. After adding 45 stitches on the knitting needles.
Depending on the size of the hat, you can stop at this stage or continue further, increasing the diameter of the circle. If the diameter of the circle suits you, knit 1 KR without any additions. Close the loops. Sew the piece to the hat, not forgetting to fill it with filler.
4. The forehead pad is a rectangle. You should knit the piece based on the size of your product. The overlay should also be filled with filler (during the sewing process).
5. Tie the longitudinal overlays: 2 - slightly longer (for the middle part of the head) and 2 - slightly shorter (located in the temporal part of the headdress). Longitudinal linings are long strips, 3 to 5 cm wide (depending on the size of the hat). Sew on the overlays.
6. A special Velcro fastener can be used to secure the “ears.”

Knitted hat for a boy for spring and autumn: diagram, description

Fashionable and convenient model"Owl" is suitable for boys under 10 years old. The video at the beginning of the article will help you calculate the number of loops.

Description and diagram of the “Owl” hat.

Knitted hat for a teenage boy: diagram with description

The video “Men's hat with a chess pattern” will introduce you to the stages of making a fashionable hat.

Video: Men's hat with a chess pattern. Men's hats knitting

Knitted stocking hat for a boy: diagram with description. Knitted beanie hat for a boy: knitting pattern

The simplest description possible.

The hat is knitted on stocking or circular knitting needles. Yarn is selected based on personal preference. The number of knitting needles (circular or double needles) must correspond to the number specified in the manufacturer's recommendations. The video at the beginning of the article will tell you how to correctly calculate the required number of loops.

Main stages of work:
1. Cast on the required number of stitches, knit the first row of the cast-on edge, close the circular row.
2. Continue knitting the hat using the “Rib 1x1” or “Rib 2x2” pattern.
3. An adult size requires a product length of at least 30 cm. For a children's hat, the length must be determined independently, based on personal preferences.
4. Once the length of the product has reached the required length, close the loops.
5. Form the crown by gathering the edge of the hat into folds (number of folds: 4 or 6)
6. Secure each fold with a stitch. Tuck the seams inside.
7. Fasten all the threads, cut off the knots.

Video: Knitting. Beanie hat

We knit hats for a boy according to the pattern with description (photo)

We knit hats for a boy according to the pattern with description (photo)

You can simply buy a hat for your boy in a store, but knitting it yourself is much more interesting. In addition, it will be possible to make a choice of materials and individual style for the child. Children's knitted items are a delight, so we suggest knitting the most simple item in a child's wardrobe - a hat. A knitted hat for a boy is a very simple but significant piece of clothing, which is presented in our unique selection. It would seem that the choice of hats for your beloved son or grandson is not so great, but the imagination of craftswomen is inexhaustible, so the selection provides a fairly wide range of models to choose from. We invite you to familiarize yourself with interesting options knitting hats with descriptions and photos.

Winter hat for boy

During the cold period, the main thing for the baby is to keep his head warm; this is suitable for this purpose. knitted hat knitting needles for boys. For knitting, it is advisable to use natural yarn made from 100% wool. Below is the process of knitting a winter hat for a boy. If you mix acrylic and wool, the hat will turn out to be autumn or spring. These are the easiest hats for boys to knit.


To calculate the number of loops, you will need to know the volume of the child's head. The dependence of the volume of a child’s head on age is presented in the table, which also demonstrates, by the presence of a photo in it, the correctness of measuring the volume of the head.
Children's winter hats are usually insulated with a fleece lining. Before we begin to implement a unique hat, we select tools and materials:

• straight or circular knitting needles;
• decorative elements (buttons);
• two-color yarn;
• scissors;
• needle.

Now you can take measurements:

• measure the head circumference;
• we knit a sample of size 10 sts × 20 r;
• measure the length of the sample in cm and find out the number of stitches. for the hat, using the measured volume of the boy's head.

Knitting a hat for a boy is provided with a detailed description. Using knitting needles, cast on the approximate number of buttonholes (80-100). If you have experience knitting with circular knitting needles, then use them. if there is none, then we will burn it out with ordinary knitting needles, which will give an equally interesting and high-quality result. We knit with a simple pattern - stocking stitch, 15 centimeters from the beginning of work we knit with this pattern (on the front side we knit with buttonholes, on the wrong side with knit buttonholes). In order for the hat to fit tightly on the head, we make decreases. For this purpose, we divide the entire work into eight equal segments, which we will call wedges. At the beginning of each wedge we make decreases, knitting two stitches. together at the beginning of each wedge. We make such decreases in each strip of the front stitch.
When there are eight buttonholes left on the knitting needle, it is worth cutting off the tail of the thread with some margin. Time to use a needle and pull these 8 loops into a small ring. We sew the edges of the work, hiding the seam on the wrong side. The stitching pattern is located below.


The main part of the hat is ready, all that remains is to knit the visor and ears. We knit the ears in stocking stitch. Having knitted 10 centimeters, you can proceed to rounding them. To do this, knit two loops along the edges of the ears together with a knit stitch. We make such decreases in three rows, then simply close all the loops.

We move on to knitting the third element of the hat - the visor, for knitting it we use yarn of a different color. The length of the visor will be 10-12 stitches, which will be closed at the same time in the last row.
So, the winter hat for the boy is ready. The result can be viewed in the photo below. A winter hat will save your baby from bad weather and cold.
The link to the video gives talented knitters the opportunity to visually familiarize themselves with a detailed description of knitting a winter hat for a 2-3 year old boy.

Video: Knitting a hat for the winter

A spring and autumn hat can be knitted not from wool, but on the same principle as a winter one. It’s not difficult to knit such a headdress, see it from personal experience!

Models of hats with a description of the knitting process

Knitted summer hat for a boy

One might assume that in the summer a child does not need a hat, but this opinion is wrong. Sometimes a summer evening can allow your baby's ears to freeze. A summer baby hat can help prevent freezing. Recently, such a useful accessory has become very popular. Before you start knitting, you need to read the description of the work sequence.
Many people are accustomed to crocheting children's summer hats for babies, but a summer children's hat can also be knitted. To knit a summer hat for a boy with knitting needles, you can use simple pattern, which is made with knitting needles, its demonstration photo is presented below.
To work, we will need a pair of ordinary knitting needles with a thickness of 3-3.5 mm and a skein of cotton thread (composition 70% cotton and 30% viscose) with a density of 100 g per 300 m. You can take a multi-colored thread with a gradient, or you can use different threads, different colors and then you will alternate them, knitting the pattern first with one thread, then with the other. Below is a diagram that is relevant for summer hats for boys, as well as a photo of a knitted sample.
As you can see, knitted summer children's hats are very easy to knit!

A hat for a baby should not only be warm, but also modern and fashionable. In addition, it must be combined in color with a jacket or overalls. Therefore, every child’s wardrobe should have at least three hats for the cold season. Knitted items look extraordinary on small children, so all young mothers should learn this art.
Do not forget that knitting is a rather painstaking task that requires a lot of patience and attention from the needlewoman. Our selection is suitable for both beginner and experienced mothers. The above knitted
for boys, any needlewoman can make it with her own hands, albeit over a longer period of time. A knitting pattern with a detailed description will help every woman.

Video: Demi-season hat

Comments

Related posts:

Knitting a jumper men's knitting according to the diagram with description (photo)
Knitted hat for newborns with photo and description

A hat for a boy can be knitted, or you can buy it in a store. We have compiled small selection interesting in our opinion models of knitted hats for boys. Knitting a hat for your boy is not only interesting, but it will allow you to choose good materials and a favorite style. And the boy will be proud that his mother knitted his hat. In addition, you will be able to fulfill any whim of your son/grandson. Sew his favorite hero onto a hat or embroider the name of a famous football player. For small children, you can knit a cozy helmet or hat with ears.

It seems that there are not so many ideas for knitting hats for boys. But in fact, take a look at our selection and you will see that this is not the case. The imagination of our craftswomen is inexhaustible. They knit hats with arans, with braids, with jacquard, hats in the shape of animals, caps, earflaps and many more interesting shapes can be found on the Internet. Knit to your heart's content!

Knitted hat for a boy - interesting models from the Internet

Gray hat for a boy with patterns

Cap size: for 6 years
Materials: yarn “Olga” -100 g gray, (50% wool, 50% acrylic, 392m/100g), circular knitting needles No. 2.5. Knit with thread in two folds.
Elastic band 2*2: alternate knitting of 2 persons. p. and 2 p. p.
Hat knitting density: 20 sts x 28 rows = 10 x 10cm.
Cast on 96 stitches and knit 6 cm in the round with 2*2 rib. Next knit 35 rows relief pattern, as shown in the diagram. Decrease in every 2nd row by knitting 2 stitches together. before and after stripes of faces. loops
When there are 12 stitches left on the knitting needles, pull them together with a working thread and secure the thread.

interesting selection to the site 36 exclusively girls' hats

Knitted spring hat for a boy

This model of hat is closer to the classics, in style and design it is more similar to an adult, a small fragment helps to distinguish it from the many standard models.

Boy's hat with two-color rice pattern

Cap size: OG 52 cm.

For knitting you will need: Alize baby wool nits (40% wool, 40% acrylic, 20% bamboo. 50 gr. / 175 m) in two threads, stocking needles No. 4.5 and No. 5.5.

Hat for a boy in the shape of a fish

Knitted hat for a boy - MK from Ekaterina Zhukovskaya

You can knit this hat for both girls and boys. It all depends on the chosen yarn color and pattern.

Size: on OG=50cm. Yarn Gazzal Baby Wool in two threads, knitting needles No. 3. Knitting density 2.6p=1cm.

Set for a boy: knitted hat and track snood

Yarn BBB Premiere. Composition: 100% merino wool. Skein weight 50 g, thread length 125 m, knitted in 2 threads, knitting needles No. 3, No. 4. Consumption per cap is 85 grams, the height of the cap is about 21 cm. About 100 grams were spent on the snood. Snood height is about 16 cm.

Knitting a hat for a little boy with knitting needles

A hat for a baby from 1 to 18 months and from 2 to 4 years from Norwegian designers DROPS is knitted from Alpaca yarn from Garnstudio with knitting needles No. 2.5. You can use any yarn of suitable thickness based on the density of 26 p*34 rows=10*10 cm, knitted in stockinette stitch.
You will need: straight knitting needles No. 2.5, yarn - 50 g, markers.
Cap size: for exhaust gas 40/42-42/44-44/46 (48/50-50/52).
Basic knitting: stockinette stitch.

Traditional shaped boy's hat

Cap size: for 0-9 months (it all depends on the thickness of the yarn).
You will need: 25 g 100% virgin wool ( 50g/216m); straight knitting needles No. 2.

Knitted green hat for a boy

This comfortable model is suitable for real athletes - a hat for a boy with a visor and ears.

Knitted car hat for a boy

The hat is knitted using stockinette stitch from yarn of three colors. Its highlight is thermal stickers in the shape of cars. The stripes on the cap imitate the road, and the cars complement the automotive theme.

Interesting knitted hat for a boy

The calculation and description of the cap are given for an adult. But if you reduce the number of stitches cast on, then such a hat can be knitted for a growing boy.

Blue cap - knitted helmet for a boy

Cupcake hat knitted with knitting needles

If you choose a different color for this model, then it can be knitted for a boy.

Description of a knitted hat for a boy:

Knitted hat - budenovka for a boy

We knit a baby hat with ears, which is very important for a little person. This cap fits well on the head, does not move and the ears are closed. Any novice craftswoman can handle the hat. After all, women often start knitting only with the birth of their firstborns and do it with great pleasure and love.

Description of the knitted hat

Knitting pattern for a hat

Excellent model of a knitted hat for a baby

Cap sizes: 1/3, (6/9), 12/18 months. You will need: 50 g of Qual Merino Extra Fine yarn (105 m/50 g) and knitting needles No. 4.
Persons smooth surface: faces. rows - persons. loops, purl rows - purl. loops.
Garter stitch: knit. rows, purl rows - persons. loops.
Density of knitting hat, faces. stitch: 21 loops and 28 rows = 10 x 10 cm.

Knitted hat, job description

Cast on 97 (105) 109 stitches and knit 4 rows in garter stitch. Then mark the following 7 loops with a thread: 1st, 18th, 35th, 49th, 63rd, 80th and last (1st, 20th, 39th, 53rd, 67 -th, 86th and last) 1st, 21st, 41st, 55th, 69th, 89th and last loop. For next additions to persons. rows, perform 1 yarn over and purl. rows knit it purl. cross, for decreases on both sides, perform 1 double pull (= remove the marked loop together with the previous loop as a knit, 1 knit loop and pull it through the removed loops).

Next knit faces. stitch and perform increases and decreases. in this way: in every 2nd row after the 1st mark, add 1 loop, on both sides of the 2nd mark, decrease 1 loop, before the 3rd and after the 5th mark, add 1 loop, on both sides of 6 1st mark, decrease 1 loop and before the last mark, add 1 loop at the same time in every 4th row after the 3rd and before the 5th mark, add 1 loop, as well as on both sides of the 4th mark (= middle) Decrease 3 (4) 5 x 1 stitches in every 4th row, then in every 2nd row. After 13 (15) 16 cm from the cast-on edge (measure along the outer teeth) in the next face. row, knit every 2nd and 3rd stitches together. and at the same time close the loops.

Occipital part: Sew the closed edge, then sew the side edges of the piece. The cast-on edge forms the front side of the hat.
Ties: cast on 4 loops respectively and knit next. way: * 1 persons. loop, thread before work, remove 1 loop as purl. thread at work, from * repeat 1 time, turn, from * repeat. After 20 (22) 24 cm close the loops. Sew the ties to the bottom edge of the hat.
The hat is ready!

Knitted elf hat

In this version, the cap is knitted in one piece, folded in half and sewn at the back. A strip is sewn to the hat along the bottom edge, tightly securing the hat to the baby's head. For the hat, choose a soft blended yarn so that the hat is not scratchy.

Description of the knitted hat

Knitted hat for a boy - models from our website

Knitted blue hat for a boy

Knitted hat for boy

In order to determine the knitting density, you need to knit a sample of approximately 15x15 cm and count how many loops and rows are in 10 cm. First wet and dry the sample. Stretch slightly when measuring. Knitting density: 1 cm – 2 loops; 1 cm – 2.5 rows.

Knitted winter hat for a boy

Knitted hat with earflaps for a boy

Knitted cap for a boy

Most often on knitting sites there are a lot of knitted hats for girls, it’s difficult to find an interesting model knitted hat It's more difficult for a boy. This khaki braided cap is certainly interesting and fashionable.

Every young mother is interested in knitting hats for children from 0 to 3 years old with descriptions and patterns. After giving birth to a child or even during pregnancy, you have to acquire clothes for a newborn or not yet born baby. The key point here is hats for the little ones. They can be purchased, but it is much more pleasant to knit them yourself - this way the parents really care. Knitting hats for children from 0 to 3 years old is not so difficult - it is only important to choose the optimal model and learn the technique.

Newborn cap

Knitting for children begins with caps for newborns, which are required upon discharge from the maternity hospital in any weather - be it summer or harsh winter, one standard model of a knitted cap will do. The only difference here is the choice of yarn. For summer, it is better to choose cotton with acrylic or a special soft weave - it is important that the hat is soft. If we are talking about winter, then choose 100% acrylic yarn - provided that it is put directly on the baby’s head. Hats with added wool are worn only on the inner textile cap. Doctors themselves do not recommend wearing wool clothes on newborns - this can cause allergies.

Knitting a hat for children from 0 to 6 months is performed in the following sequence:

1. Buy yarn - 100 grams of yarn with the volume of thread for knitting needles No. 3 is enough. Prepare knitting needles No. 3, you can use No. 4 - then the fabric will be loose and suitable for the summer version.
2. For example, it will be described knitted cap using knitting needles No. 3-3.5. Therefore, only 70 loops are cast on with yarn.
3. For a better fit of the fabric to the head, knit 8 rows with a 1x1 elastic band.
4. Next, switch to stocking or garter stitch and knit another 20 rows. Do not close the loops, but break the thread. The result will be a canvas for the oval of the child’s head.
   
5. Now start knitting the back of the cap. Carefully divide the fabric into two parts using the second knitting needle. Transfer, without knitting, to right knitting needle 25 loops. Attach a thread between the loops placed on the knitting needles for further knitting.
6. Knit 19 stitches with the attached thread. Make a connection between the back and left side parts by knitting the 20th loop of the back part together with the first loop of the left side with a purl loop.
   
7. Turn the work over and repeat the same method of connecting the parts. It turns out that only 20 loops of the back part are knitted, and the side loops are knitted like edge loops with purl loops.
8. The rads are knitted in a similar way until there are 3 loops left on the side parts.
   
9. The last 3 loops of the side parts are knitted using the same technique, only the loops of the back part are knitted 2 together according to the pattern - this is necessary to tighten the bottom edge of the hat for a newborn.
   

Finally, tie the ties for the hat. This can be done in two ways - crocheting or knitting. The ties are crocheted, catching the loops of the corners of the cap. After grabbing, crochet and attached thread air loops to the required length of ties. Make a rise and knit one row with single crochets to the captured loops at the beginning of knitting. When finished, make a connection with the main fabric, tear off the thread and hide it.

If you don’t have any knowledge of crocheting, you can use the same knitting needles. To do this, use knitting needles to grab the same corner loops of the resulting cap. The optimal number of loops is 4, where 2 will be on the edge loops. 4 loops strung on knitting needles are knitted in garter stitch to the required string length. You can resort to knitting in stocking stitch - only in this case the ties will twist in a spiral due to the low density of the resulting “fabric”.

This technique with a standard description of hats for newborns, which can be used for knitting products for children under 1 year old. At older ages, slightly different models are used - more complex, but attractive.

Hat for a child from 1 to 2 years old

Hats for children under 2 years old may be more fashionable, but with the obligatory presence of “ears”. Such “ears” with ties are required to prevent the headdress from being taken off during a walk - children at this age refuse to wear hats, so a child sitting in a stroller can take off the hat immediately after putting it on again.

A standard hat for children under 2 years old with a description and diagrams can be found on the Internet. But for beginners, the following simple description of the headdress is offered:

1. Take yarn with a gauge for knitting needles No. 3 or 3.5. Prepare knitting needles with the stated size and start knitting for the next example.
2. Cast on 7 stitches on the knitting needles - 2 of them are edge stitches. Knit 26 rows in garter stitch, adding 2 stitches on each knit row. The addition of loops is carried out after the edge and before it by knitting from 2 loops - 3 loops. To do this, remove the edge, knit one loop, make a stretch of fabric between the two involved loops, knit the 3rd loop. This way you won't get the holes that are typical for adding holes. The result will be 33 loops.
3. The resulting canvas is an “ear”. It is not removed from the working needle, the loops are not closed. Just move the fabric aside and knit a second one in the same way on the same knitting needle.
4. The resulting “ears” are combined in the 27th row into one fabric - knit the first 33 loops, cast on 10 loops on the knitting needles, knit the second 33 loops.
5. Knit with a turn in garter stitch. In each 4th row of the front row, make a standard increase in stitches. In the same way, add a total of 8 loops - make 4 additions in the fabric. As a result, there are 84 loops on the knitting needles.
6. Now you should connect the ears with knitting the forehead line. To do this, knit the entire fabric - 84 loops, cast on another 16 loops, connect the fabric, getting rid of the edge ones by simply knitting loops.
7. Next, the hat is knitted in the round - there will be only 100 stitches on working knitting needles. Knit in a similar way to almost the entire height of the head - it is better to measure directly on the child. Approximately 26-34 rows will be required.
8. Subsequently, decreases are carefully made. To do this, knitted 100 loops are divided into an equal number of sections. For example, 100 loops can be divided into 10 sections.
9. Decreases are carried out in the standard way - by knitting 2 loops together, knit or purl, as follows from the drawing and the selected knitting pattern. Carry out decreases at the end of each division into parts - knit together the last 2 loops of the part. Decreases are made in each front row, that is, after two rows.
10. Decrease stitches in this way to the remaining 10 stitches on the knitting needle. Cut a thread 15 cm long from the ball and connect the remaining loops - stretch the thread cut from the ball through all the loops. Pull the thread so that there is no gap left between the loops.
11. Hide the thread in the canvas. Additionally, make a pompom and attach it to the top of the head - this will further hide the gap between the remaining loops.

This is a simple standard knitting cap for children under 2 years old with a description. Knitting ties for “ears” is carried out in the manner described above. The model is suitable for beginners, but experienced needlewomen can use more complex knitting of hats for babies.

Hat for children 3 years old

Knitted hats for children 3 years old can be knitted without ties. There are many models of similar knitting, but it is enough to use more simple models for boys and girls.

Hat for girls

Knit your young fashionista a hat with imitation cat ears. Girls are simply delighted with the models presented, and mothers who are novice knitters will gain incomparable experience in knitting modern patterns.

So, take the thread and suitable circular knitting needles. Follow these steps:

The result is a ready-made hat for a girl, where cat ears are made at the end. Tie belts with thread for tying or use special threads with tassels for sewing and knitting. Grab the corners of the cap and tie them with thread at the same distance from the top of the corner to get ears of the same size. Make sure that the ears do not exceed the permissible size - otherwise, the finished hat will rise, as a result of which the child’s ears are constantly exposed.

You can knit a hat for a boy in a similar way. Only in this case, the cap is put on across - an imitation of a dragon's scallop is created, which was fashionable earlier and is popular now.

Boy's hat

You can provide a knitting cap with a description for a boy separately. For more simple option a standard cap without ties is used, which experienced craftswomen decorated using complex patterns on the main canvas. Braids work best for this, but you can decorate it using two contrasting threads to get a striped rainbow pattern.

Knitting a hat for a 3-year-old boy is carried out in the following way:

1. Take a thread and suitable knitting needles, knit a sample, bring it to a “finished” state, perform standard calculations to determine the knitting density.
2. After completing the calculations, start knitting - cast on the knitting needles the required number of loops.
3. Knit 8-12 rows with 1x1 rib. You can use a 2x2 elastic band if the yarn is thin and you get a characteristic “ripple” on the elastic.
4. Now move on to knitting the main pattern for the hat. The number of loops for knitting a hat should be calculated taking into account the repeat of the selected pattern. If garter or stockinette stitch is used, the number of stitches is determined only taking into account the density of the yarn and knitting needles.
5. Having knitted the main fabric almost to the height of the child’s head, they begin to decrease the loops. To do this, the number of loops is divided into equal sections. If this is not possible, send most of it to the occipital region with a seam.
6. Decrease occurs in each front row of the hat - at the end of each part, 2 loops are knitted together according to the picture. If you use simple stockinette stitch, decrease only at the back or front walls. It is important to create a neat knitting of the crown - let it create a characteristic “spiral” pattern.
7. When there are 8-10 loops left on the knitting needles, a 30 cm long thread is cut from the ball. Make a join by pulling the thread through the remaining loops and tightening them at the end - taking into account the necessary absence of gaps between the loops.
8. Sew the edge loops with a needle and the remaining cut thread. You can use a crochet hook by decreasing knitted fabric knitting needles

It is better to use a pompom as a decoration for such a hat for a boy - when attaching it, the loops on the top of the head will be additionally tightened. This model is often made striped, and during stripes with changing colors, a change in pattern is used. For example, the main fabric is knitted with blue thread and stockinette stitch. Add white stripes using garter stitch on the main fabric. The canvas will visually gather like an accordion, which looks interesting and attractive.

It is important to note that when using certain patterns for knitting hats, it is necessary to first knit the appropriate samples to correctly calculate the number of loops. Without preliminary calculations, you can make a mistake with the size and the product will turn out small. When knitting in the round, you cannot correct a mistake.

When knitting hats for children from birth to 3 years old, you can use the given patterns, technologies and descriptions. It is recommended to add your own imagination to standard knitting techniques in order to make your child an individual personality and just a happy person.

Nowadays, the retail chain is filled with a variety of children's goods, both sewn and knitted, industrially knitted on special machines. These are various children's sweaters and pullovers, scarves and hats. But it’s not always possible to find the model you like on sale. Therefore, many mothers and grandmothers believe that a knitted hat is much better than a store-bought one.

Knitting is fun and interesting activity, which allows craftswomen to knit any items of clothing or accessories. In this lesson we will look at how to knit a hat for a boy.

To make a summer, autumn, winter or spring hat for a boy, you will need a drawing diagram with a detailed description.
Any knitted children's hats have advantages over purchased ready-made models. You choose the quality yarn, pattern and style of the product yourself. The cap can be embroidered with any symbols, or decorated with applique. Winter hats for boys can be knitted with ears, or even in the shape of a helmet, to keep the boy warm.
At the beginning of the lesson, we will look at how to knit a light summer hat, with which you can protect a boy’s head from the scorching sun. For each model in the lesson there is a diagram with a description.

To determine the size of the hat, before starting knitting, we recommend taking measurements. Knowing the size, you can calculate the required number of loops and knit a hat of the model you like.

Video: Stylish option for the little fashionista

Openwork summer hat for little ones

A light openwork knitted hat well protects the boy's head from overheating in the sun. At the same time summer model must be knitted from yarn, which necessarily includes cotton or linen.

The yarn you see in the photo includes cotton, acrylic and polyamide. To knit an openwork hat for a boy, you need to use knitting needles No. 2.5, and the density of the fabric is 2.3 loops in 1 centimeter (cm). Knitting a hat size 46-48 can be made from 50 grams of this yarn.

We take a measurement of the boy's head circumference and knit a sample to calculate the loops (P). The repeat of the “Wave” pattern with which we knit this model is 3.5 cm and contains 8 loops. If the head circumference is 46 cm, then 13 rapports will be needed.

Below is a diagram in the photo, with a further detailed description. The vertical line is a front loop (LR) in the front P, and a purl loop (IP) in the back P. The horizontal line has the opposite meaning. The black circle is a yarn over, and the down arrow is 3 loops along with a rearrangement.

These children's hats are sewn together with a knitted seam. It is recommended to sew hats for boys and girls with this seam because it is flat and therefore does not cause discomfort to the boy.

An openwork hat for a child turns out beautiful and comfortable.

Video: Colored beanie hat for a boy

Knitting a demi-season hat with braids

Boys' hats are knitted for any time of year. Children's hats, knitted from thin yarn on small-diameter knitting needles, perfectly warm children in the autumn and spring. The big frosts have not yet arrived, but the warm summer is already behind us, and the coolness is making itself felt. The photo shows a hat that is just right for spring or autumn. This autumn or spring model is universal, looks stylish, and is sure to please boys. Look especially impressive knitted patterns with braids.

It is not difficult to knit, and it is suitable for a boy of 6-7 years old. You will need 100 grams of mixed yarn, wool with acrylic (392 m per 100 grams), as well as circular knitting needles No. 2.5. The knitting density of this yarn is 20 loops and 28 rows in a 10x10 cm pattern. The hat is made with a 2x2 ribbed pattern, as well as a twisted pattern. The photo shows a diagram of a twisted pattern with a detailed description.

1. Starting knitting, cast on 96 stitches.
2. The first 6 rows are done with a 2x2 rib.
3. After the elastic band, we begin knitting the “Braids” pattern according to the pattern, where there are 35 rows in one repeat.
4. Having knitted the main fabric with such an ornament, we begin to decrease the number of loops.
5. We decrease the loops in every second row by knitting 2 loops together along the edges of the strips of LP.
6. We continue such reductions until there are 12 pieces left in the work. We tighten these last Ps and fasten the thread from the inside out.

Video: Headdress with ears for a boy 2-3 years old

We knit a winter helmet for a boy

We continue to knit children's hats that boys can wear. Let's look at how to knit a winter hat shaped like a helmet. Any child will like the model because it has the outline of a real helmet.

We will perform handicrafts, guided by a detailed description.

This is the kind of original winter hat and helmet you will get.

Video: Warm earflap hat with knitting needles

Hat with ears and lapel for a boy

Very interesting model hats that are suitable for the winter because they are knitted in two threads, have ears, and tightly cover the boy’s head. In the photo you see ready-made diagram hats for ages 18-24 months.