Openwork crocheted hat for girls pattern. This detailed tutorial contains crochet lessons for beginners and will teach you how to crochet a summer hat. Transition from the round part of the bottom to the crown

One of the favorite headwear models for women is hats. Their popularity continues. Every
season new models appear. The article offers a selection of crocheted spring and winter hats.

The easiest crochet hat for beginners

A simple, yet stylish model for beginners

Let's start analyzing crocheted hats with a model for beginners from melange yarn. It is knitted only with single crochets. It is offered to her.

Size 56 cm.
You will need:
- 300 grams of medium thickness yarn (for example, Lanagold 240);
- knitting needle No. 7, hook No. 3.5.

Description of knitting a hat:

Cast on 2 chain stitches and knit 6 double stitches into the first stitch. Knitting goes in circles. In the next row, double the number of stitches. Then continue working, adding each p. six st.b/n. until you reach a diameter of 17 cm.
Then continue straight without adding 9 cm.
For margins, add 1 tbsp in every 3rd column. Then knit 5 cm without increments. Along the edge of the cap, make 1 row in a “crawfish step”.
Scarf: knitting goes in the transverse direction. Cast on 180 stitches. and knit in garter stitch 20cm.

Delicate crochet hat

First we knit, then we knit

The soft fluffy warm hat is crocheted with single crochets. It is shaped like a bell and decorated with buttons and horizontal stripes.
Size: 56 cm
You will need:
— yarn 50% lamb wool, 50% angora — 100 grams;
- hook No. 4;
- some thread for finishing;
- two buttons.

The hat must first be crocheted, then felted in the machine (optional).

Sample making:
Cast on 21 chain stitches and knit the sampler with several rows of double stitch. and try knitting it. To do this, put it in washing machine with other things, put in the washing powder, set the program with high temperature. Flatten the sample and dry. It should be 9 * 8.5 cm. Alternatively, you can knit several probes with different hook numbers. In order not to forget what number the sample is knitted with, mark them with different threads. Wash all samples. Whichever sample will correspond to the required size, take that hook number for knitting.

Crochet brim hat pattern
Knitting starts from the crown. Cast on 4 stitches and close in a circle. Knit 1 half double crochet in 1 st.

Next we knit the part with an overlap. We will do this in rotating rows:

Knit the fourth row 2 times.
RUR 33: Take a cotton thread and pull it along the edge of the cap, leaving 10cm from the edges. Tie another row of single crochets (like 4 rows), together with this one will complement. thread (to strengthen the edge).

Legend:
VP - air loop
pc - chain loop
sc - single crochet
psbn - half crochet

Completion:
Pull the thread at the top and fasten tightly. You will need a blank to dry the product. For example, a jar or flower pot with dimensions of 14 cm at the top, 18 at the bottom and a height of 15 cm. Knit the hat in the machine as described above, pull it onto the blank and dry it. As soon as the cap dries a little, try to pull it up to your head volume, then leave it to dry further.
Sew a piece of the strip from the inside. Take yarn in a contrasting color and sew 2 braids around the hat.

Elegant retro hat crochet hat

Spectacular spring crochet pattern

Size 56-58 cm
You will need:
— Qual Merino Cotton yarn (52% merino, 48% Egyptian cotton, 120 m. 50 g) — 150 g;
- hook No. 4.
Density: 20 embossed columns = 10 cm

Description of work and hat knitting pattern
Embossed double crochets: knit in front or back in double crochet as before. p.. Start circular rows with two air loops lifting instead of one relief pillar. s/n and end with the 1st connection. pillar. into the second air lift loop. We double the relief st., knitting two of 1 sts of the previous row.
Crochet 3 chain stitches, one connecting st. enclose in a circle and knit 1 r. relief st.s/n like this:
1st row: 12 columns s/n;
2p.: * double 1 relief. St. s/n in front, 1 relief st. s/n behind - repeat 5 p. (=18p.);
3 p.: * 2 raised treble crochets in front, double 1 reliably crochet crochet crochet behind - 5 times (=24 p.);

Video master class on a crocheted women's hat from Irina Sherekina:

In black and white - always relevant!

Classic black white always relevant

The next model of a warm crochet hat is the black and white classic bell hat.
Size 56 cm
You will need 100 grams of pure wool yarn of medium thickness in black and white, hook number 5.
Knit the product with single crochets (SC), catching them on the top half loop.

How to crochet a hat with a brim?
Start knitting from the top. First we knit a chain of three chain stitches, then in the last loop from the hook we knit 6 stitches. Continue to spiral sc in the top stitch, evenly adding 6 sc in each round. When the diameter of the circle is 12 cm, add after 1 row: 1 p. no increase, 2nd rub. - add 6 STB until the folded product is 27 cm. Further 12 cm without additions.
Let's move on to the brim of the hat. You need to divide with a marker into 6 sectors and knit 9 rows, adding 1 STB to each marker. The hat is decorated with an artificial flower.

Crochet hat “French chic”

Cloche - translated from French, means bell. It was from there that the fashion for stylish, neat models of hats with small, slightly widened brims came to us. In the 20s of the last century, women rebelled against conservative stereotypes in clothing, refused corsets, long dresses... And, of course, the new style required new hats. This beautiful style is relevant again. How to crochet a small cloche hat?

Size 56-57 cm
You will need:
- tone-dyed yarn (15% wool, 25% polyester, 60% acrylic, 875 metres, 350 g);
- hook No. 7;
- pin, tulle, silk and rhinestone for the flower.

Attention! We will knit the hat in two folds, watch the color transition.

We start from the top of the head. From the chain 5 air items. knit 9 sc. In the second r. double the number of columns (=18).
We continue to knit in a spiral, making in the 3rd row. 8 increments, and in each next. - 6 additions each. Add until no. will not become 56.
Then knit straight to a crown height of 17cm.
For the fields you need to make 8 additions in 2 p. in a row (=72), then 4 rubles. no additions. Last r. - a crayfish step.
Tie a lace 70cm long and stretch it between the crown and the brim.
Let's make a flower. Cut out 8 circles of 10 cm for the petals, fold each in half twice and sew with the centers. Under the petals there will be a ruffle made of a strip of tulle, in the center there will be a rhinestone. The flower is pinned and attached to the cap.

Greetings! I'm posting today detailed master class By crocheting a warm hat with a thick brim.

The first post with a description was about such a hat. Those who knitted according to that description had various questions, including how to knit without lifting loops, how to perform fields etc. Therefore, in the end, I decided to make a new description, because I wrote the past from my memories, and forgot some moments.

True, each time you have to calculate the parameters anew for the size of the crown, the number of rows, etc. Because when knitting embossed columns with a thick thread, the crown seems to rise, and you need to calculate its diameter to be slightly larger.

Well, I have knitted according to this scheme not only hats, but also a hat. Suddenly she called great interest for many knitters. Therefore, as I already wrote above, I prepared a detailed photo-MK. It is very large, more than 40 photos, I had to divide it into two parts.

In this post I will show you how to knit the crown and crown.
In the next one, I’ll reveal the “secret” of how to connect neat fields with a beautiful, thin outer row.

By the way, please note that although the hat is knitted with dense threads and volumetric pattern, the fields around the edges are thin, light! Everything is done with the same crochet hook.

Hat size: for a 1.5 year old baby.

I'll show you the top of the head closer. All pictures are clickable (open when clicked in a new window) and can be viewed in photo album format.

So let's begin. What you need to knit a hat:

hook No. 3.25 (I have “Addy”);
yarn “NAKO” Bambino, 25% wool, 75% acrylic, 50g/130m, two colors, I’ll call them “orange” and “green”. Although, different names are suitable: orange, carrot, ultra-yellow, light green. A skein of orange color is just beginning, from which I knitted flowers for booties. It turns out that thread consumption 100 grams.

Symbols used:

air loop - VP,
connecting loop - SP,
double crochet - dc,
embossed double crochet stitch - RSSN.

How to crochet the crown of a hat

Detailed description big flower with a Dorset button associated with this hat can be seen in post . I specially made it earlier so that I could leave a link for those who would like the flower.

So, let's start knitting with green thread. Let's make an “amigurumi ring” (“magic loop”).

We put 3VP of lifting into it.

Then 11 double crochets, for a total of 12.

They pulled the end of the thread and pulled it into a ring.

Let’s finish with a connecting loop at the top of the first column (the one made from three VP lifts) - row 1 is ready.

From the second row we will perform additions for the crown. Let's start like this:

without VP lifting, we immediately knit RSSN into the leg of the Column CH from three VP lifting prev. row. I show you step by step. Throw the yarn over the hook.

They grabbed the leg of one column before. row.

The column was pulled out.

We tied the first Relief SSN.

We knit the second column - it will be a simple one, in a jumper (shown with an arrow where exactly).

And, right there, a Relief CSN was tied next to it. The arrows indicate two relief columns.

Further *StSN+RSSN* - to the end of the river, 24 in total. But there are 23 of them in the photo now. I'll show you how to finish a row so that the seam is invisible. I remember now how I know this technique: Olesya described it in her description.

Look what we're doing. We knit a simple Double Crochet into a jumper before the first Relief Double Crochet so that the seam is not visible. They tied him up.

Then we knit a joint at the top of the first column of the previous one. r., i.e. Let's get her out of here.

I pull it out

And they closed the joint venture. The second row is ready.

Third row: *two Relief DC, 1 simple Column DC* - to the end of the row, 36 in total.

That is, we knit like this: 1 relief in the 1st RSSN before. row, the second embossed into the leg of a simple Column CH previous. row, next to a simple Column CH - into the jumper.

Fourth row: *three Relief DCs, 1 DC* - a total of 48.

Thus: 1 and 2 Relief CCHs in Rel. CCHs previous. r., third Rel.Dc in the leg of a regular double crochet previous. p., and next to it, knit a simple St DC into the jumper, i.e. again add 1 St DC in each wedge.

Fifth row - 60: *1,2,3,4 Relief.Dc - shown by red arrows, 1dc - blue arrow* In the photo of the beginning of the row, the 1st wedge is shown.

I measured it, it’s still too small for the top of my head.

Sixth r. — 72: *1-5 RelSSN, 1 St CH*.
Seventh r. - 84: *1-6 RelSSN, 1St CH*.

Eighth r. - 96: *1-7 RelSSN, 1StSN*. I measured - the top of the head is 14 cm. I am knitting a baby hat, so the size of the top of the head suits me. If you are knitting in an adult size, keep in mind that the pattern is voluminous (as I already wrote about above), the top of the head looks larger in appearance than it will “sit” on the head.

Let's knit hats

We move on to knitting the crown, adding a thread of a different color to the main one. I make a loop from orange thread, put it on a hook that I took out from the main knitting. Then I pull the first green one through the orange loop, like this.

Then we knit with green thread 2 Relief dc in two Relief dc before. row.

Be very careful here when you start knitting with different threads. So, it turns out like this: in green we knit 1 RelDC in the first RelDC before. r., 2 - in the second ReliefnSSN before. r., change the thread, knit the orange one NEXT to the jumper with a simple dc.

SKIP next relief column with a double crochet (otherwise you will end up with an increase) and again knit two Rel-x Stolbika CH in green, next to the Stolbnik CH in orange. It will be easier later, the main thing is not to mess anything up here.

It turns out that the green one is always on top, and the orange one is on the bottom.

And more! Be sure to tighten the loops every time on each post when changing threads, otherwise the row will “slide out” and the hat will turn out lopsided. Hard? It only seems so, just be careful and patient, everything will work out!

I'll show you in steps how this is done.

So, the 1st row is knitted without increases, it turns out exactly 96 loops. You see, my last orange color StSN ran out just before the two previous RSSNs. row (the small orange dot is the same loop that we made and put on the hook before the green one when we started knitting with two threads, remember? Shown with an arrow).

We knit the second row of the crown according to the pattern. No lifting loops! Here is a photo of the first wedge. I'll show you how to tighten the thread.

Look: I am knitting a double stitch with an orange thread, while the green one is slightly sagging.

So I finished knitting the orange stsn, the green one was hanging.

Now, having picked up the green one, I immediately pull it up - like this. And, I knit the first of two RSSN green. Look - the orange thread remains at the bottom, the green thread goes through the top.

We tied both RSSN, the orange one is sagging, now I’ll tighten it up and tie a regular StSN.

Of course, while knitting, both threads do not lie on the knitting; in the photo I specially put them on top so that you can see how they are positioned during the process. And so, they hang from the wrong side, and do not interfere with each other, do not get confused after a couple of such rows are knitted.

We knit with a crown, alternating threads. At first it’s a little unnerving that you have to change them all the time, and make sure that they don’t get twisted and the hook doesn’t catch on another. But this is only at the beginning, then one thread will always be on top, the second on the bottom.

That's all for today!

Best regards, Saule Vagapova

Seal

A hat is one of the universal accessories. This headdress can be sewn from fabric or knitted from yarn. Last option especially suitable for hot summer days or vacation time. Any needlewoman can master crocheting summer hats, they are so easy to make.

How to crochet a hat?

All hats are crocheted using the same principle. First you need to take your measurements and think over the future model. Place a measuring tape around your head. It should pass through the back of the head and the middle of the forehead. The resulting number should be remembered. This will be the size of the finished headdress.

Knitted hats can be completely different - with large, small brims, openwork or a solid pattern. It is also worth paying attention to the type of yarn. Summer hats are often crocheted from cotton and linen threads. They keep their shape perfectly. In addition, they are easy to starch. This treatment makes the edges more rigid. It is best to use threads of medium thickness.

The technique of knitting hats comes down to the fact that first you knit the crown. To do this, close the air loops into a ring, and then begin to make increases. After uniform knitting, you get a bottom that has folded edges. After that they move on to the fields. Make increases and knit the same number of loops to the desired width.

Crochet hat: knitting pattern

You will need:

Measuring tape
Threads of medium thickness
Hook 3 (or any other that matches the yarn)

Manufacturing instructions:

Tie 3 air loops and close them around with a half-column. Knit 2 single crochets into each stitch.
Start the 2nd row with a lifting air loop. Then, in each column of the previous row, knit 2 loops according to the pattern. Complete the knitting by connecting the beginning and end with a half-stitch. This action should be repeated at the end of each row.
In the 3rd row, start repeating: 1 single crochet in the 1st loop, 2 in the 2nd. We start the row with an air loop and end with a connecting post.
4th row: 1st 2 loops - along the 1st stitch, and in the 3rd we knit 2 single crochets.
Making additions in this way, knit another 10 rows. We got the bottom of the future hat. There are about 68-70 loops at its base.
Next we knit the crown. To do this, we perform 1 stitch in each loop. In this way, you need to knit the fabric to a height of 12 cm. We knit 2 stitches into the last loop of the row.
Start making additions. Knit 2 stitches into the first loop and skip the next one. Knit the fabric in this way up to 18 cm (total height from the beginning).
Next row: 1 loop in the 1st column, 2 in the next. Repeat alternating until the end of the row.
Continue knitting the hat by knitting 1 single crochet at a time. Knit in this way until the brim of the hat reaches the desired width. Cut the thread and pull the tail through the loop. Then carefully hide it.

Crochet hat for a girl: job description

You will need:

Thin yarn like “Iris” - 100 g.
Hook 2

Manufacturing instructions:

Knit 12 air loops and close them into a ring.
1st row: 1 double crochet, 1 chain crochet, 2 double crochets in 1 chain, 1 chain crochet. Repeat this way until the end of the row.
2nd row: 1 double crochet, 1 chain crochet, 1 double crochet, 1 chain crochet, 2 double crochets in 1 chain, 1 chain crochet.
3rd row: 1 double crochet, 1 chain crochet, 1 double crochet, 1 chain crochet, 1 double crochet in 1 chain, 1 chain crochet. Knit the next 3 rows in this manner.
7th row: knit 1 double crochet into each loop, and 1 chain stitch between them.
Let's move on to the fields. And we knit 2 double crochets for each loop of the previous row. Between them there is 1 air loop.
The next rows are double crochets in each stitch. We knit in this way until the fields reach the desired width. We cut the thread and pull it through the last loop using a hook. We carefully hide the tail on the wrong side.
You can decorate the finished hat with a ribbon or crocheted flowers.

Crochet summer hats: how to knit?

This hat model is quite simple to make. At the same time, she looks quite stylish. It can be worn with summer sundress, denim shorts or linen trousers. The headdress is universal and suitable for any style of clothing.

You will need:

Cotton or linen yarn, 320 m. per 100 g. - 1 skein.
Hook 2
Line for fixing fields

Manufacturing instructions:

First, we calculate the diameter of the bottom of the future hat. To do this, take a head circumference measurement. Divide the resulting number by 3. Then subtract 2 cm from it. This is done because after washing the product will shrink a little, but then stretch during wear.
We begin to knit the bottom. To do this, we close 3 air loops into a ring. Then we knit 6 loops into it.
We start adding from the 2nd row. To do this, we knit 2 single crochets into each loop.
3rd row: 2 single crochets in 1 loop, 1 in the 2nd. We alternate knitting in this way until the end of the row.
We knit according to the pattern until the diameter of the bottom of the crochet hat is equal to the number that we obtained thanks to the calculation at the very beginning.
Let's move on to making the crown of our headdress. To do this, we knit 1 single crochet into each loop. The 1st row is performed quite tightly. Thus, we continue knitting, periodically trying on the workpiece. You need to finish the crown when it reaches the height of your ear. At this point it is necessary to create holes for threading decorative tape. To do this, we knit the last row of the crown with single crochets.
Next we move on to the fields.
1st row: in every 10th loop of the previous row we knit 2 single crochets. We perform the next 3 rows without additions, according to the drawing.
5th row: make an increase in the form of 2 single crochets in every 12 loops. We knit the next 3 rows without increases.
Row 9: adding 2 stitches to every 14 stitches. The next 3 rows are unchanged.
13th row: adding 2 stitches in every 16th loop to the end of the row. Next we knit 3 stitches without increases. We have formed a slightly flared brim of the hat. Let's move on to strengthening them.
Cut a long piece of fishing line. We press it to the last row and carefully tie it with a single crochet. When we come to the end of the row, we should cut the fishing line and connect its edges. To do this, they are melted with a lighter. We cut the thread and carefully hide it inside the headdress. Crochet summer hat is ready!
Almost all hats in finished form don't keep fit. They can be made tougher in a variety of ways. Usually starch and sugar syrup are used. A gelatin solution is no less effective. Take and heat 1 tbsp. water. Pour a 25 g bag of gelatin into the hot liquid. Mix everything thoroughly. Then add 0.5 tsp to the solution. salt and 4 tbsp. l. 9% vinegar. The liquid should be poured into a large bowl. Then they put the knitted hat there and let it get wet. Next, the product is wrung out and the water is allowed to drain.
Cover the table with a bag or polyethylene. We put a three-liter jar on it. We put a hat on her. Let's give it shape. Special attention We pay attention to the crown. Let it dry a little. Then we remove the hat and leave it standing on the polyethylene. We wet the fields with a sponge and smooth them thoroughly. They should lie flat on the table. Let the product dry. After this, the headdress is ready to wear.

Crochet hat: photo

In order to crochet a hat, you need to take a head circumference measurement. Knitting starts from the bottom. Usually the air loops are closed into a ring, and then the additions begin. Knit this way until the workpiece reaches the desired size. Then they move on to the crown. It is knitted without any additions. For fields, a certain number of double columns must be made. They will help expand them. Then the fields are knitted without increments until they reach the desired width.

Summer children's hat for girls! A wonderful decoration for a little princess!

We will need:

yarn for a hat 169m/50g (consumption for the hat itself - 1 skein);
hook No. 2.1 and No. 2.5.

We’ll take this pattern as a basis, but we’ll make our own adjustments during the knitting process. The hat will fit on an OG of 48-50 cm.

We will use abbreviations: v.p.- air loop; SS- connecting column; RLS- single crochet; CH- double crochet; S2H- double crochet stitch; С3Н- double crochet stitch.

I draw your attention: Each row starts with 4 ch. - 3 lifting loops and 1 ch. for the arch.

The hat pattern is knitted in the form of the so-called. "tick" - 2 dc, separated by 1 ch. into the arch of the previous row. The expansion of the bottom to the required diameter occurs by uniformly adding 6 “checkmarks” in each row. To ensure that the corners in the places of increases do not stand out sharply, the increases in each subsequent row are made offset by half a segment relative to the previous one.

So, let's start: 4 ch. - we close it in a ring.

1st row - 4 v.p. (3 lifting loops and 1 ch for the arch), 11 CH.

2nd row - in each arch of the previous row we knit 2 dcs, separated by 1 ch. It turns out 12 t.n. "tick".

3rd row - we begin to make “tick” increases. In each subsequent row there will be six such increases. The essence of this increase is to knit an additional “tick” between the arches of the previous row.

Row 4 - make 6 tick increments every 3 ticks of the previous row.

Row 5 - make 6 tick increments every 4 ticks of the previous row.

Row 6 - knit without increments. In each arch of the previous row we knit 2 dcs, separated by 1 ch.

Row 7 - make 6 tick increments every 5 ticks of the previous row.

Row 8 - knit without increments. The bottom begins to round out a little.

Row 9 - make 6 tick increments every 6 ticks of the previous row. This is where the increases end and we continue to knit the hats to the required depth without them. The bottom was 13 cm. I got 26 rows from the beginning of knitting and the height of the hat to the brim was 17 cm.

This is what the seam looks like.

For the fields we knit 2 rows of sc. In the second row we make increases in every 5th column. In the next row, in each top of the column of the previous row, we alternately knit 1 embossed column and 1 DC. That. crochet number 2.1 we knit three rows of fields. Now change the hook to No. 2.5 and knit 2 more rows. The photo shows that the brim becomes perpendicular to the hat itself from the first row of knitting. We knit the last row in crab step with crochet number 2.1.

Thread - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
I knitted a strip of fillet mesh around the circumference of my head (4 rows) - in a circle - this is how the bandage turned out
Then I attached the thread and knitted the strip on top with fillet. I tried it on my daughter. The holes were large. I tied them with fans, but at the same time adjusted the pattern so that it did not expand, but vice versa
Fields:
When moving to the brim, I knitted 1 row of sc (I always knit 2-3 rows of sc, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did this deliberately so that the hat would be looser at sea)
then 3 rows of arches from 5th century. p.
And then fans according to your favorite pattern
Then I tied a double ring of regilina sc, then in a crawfish step.

Hat “Little Lady”

diagram and description of the side part

Diagram of the bottom and crown for exhaust gas 49-50 cm.

My yarn

My connected 13 rows of the bottom:

Up to the 13th row inclusive, we knit the same for all sizes.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the post, it is advisable to use the “deep” sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to shift when we knit with the crown.
* * *
Starting from the 15th row for all sizes we knit according to the pattern. Repeat rows 15-20 two more times.
They differ from the 15-20th only in the last row. Instead of a dc, I knitted a sc.
We also knit rows 33-38 according to the pattern.
38th row - RLS in each column.
The fields start from the 39th row.

We finish with the CROWN and insert the FIRST regelin equal to the circumference of the head. I made one vein. This is where we complete the work of the RLS. Steam.

We knit the BRIMS of the hat.
In the 39th row we make increases in every 3rd column,
In the 45th row - every 4th, in the 51st - every 5th.
The point is that in each row with increases you need to add 56 CH (7 reports). That is, in the 39th 168/56 = 3, in the 45th (168+56)/56 = 4, etc.

STRENGTHENING FIELDS.

After the last row of fields is knitted, they need to be steamed well.
On a horizontal table surface, the fields should have the shape of a flat circle.

We take the SECOND regilin (TWO veins at once) and tie it with RLS. The length of regiline is not measured in advance!!! They just cut off the excess later.
We straighten the fields well.
Let's steam!
We tie the same row of RLS again. And we tie the last row with a “crawfish step” through the post.
On a plane, the fields should still be shaped like a flat circle.
Once again we steam the fields with an iron through a damp cloth!!!.
To add rigidity, I used SALVITOSE, which is used in felting.
Air dried.

DECORATION.
It must be removable - on a pin or button.

Knitting daisies is very easy.
Dial a chain of 2 v. n. In the first of them, knit 8 half-stitches and close them in a circle in the 1st half-stitch.

When the whole chamomile is ready, tie each of its petals in succession with connecting posts. This will allow them to keep their shape and not curl.

For the centers of the daisies, make small pom-poms using a regular dinner fork.

We wind the thread around the teeth of the fork. Then we tie it with an additional thread in the middle, remove it from the fork and tighten the knot. Then fluff and trim. Sew to the center of the daisy.

Two daisies are small, and one is slightly larger. For it, the scheme is the same, only for the petals we dial not 7, but 9 v. p.

I made a decoration on a button clasp for bags.
We will need a button and a knitted circle - this is what the daisies will be sewn on:

In finished form:

We attach the button to the hat

Scheme (for petals only):

Designations: the sketched dots on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull from the connected column (to make it easier to count loops)

Blind (connecting) loop

I knit from Soso threads (50g=240m) with a regular hook No. 1.5 (without a handle)

Step by step photo process:
1. We knit 6 single crochets into a sliding loop

tighten the thread and close it in a circle.

2. Grabbing only the back half of the loops, we knit 11 single crochets (1 sc in the first half and 2 sc in the subsequent ones), connect them in a circle.

Half loops of a smaller circle will be needed for the upper petals.

3. We knit arches for the lower petals: cast on 5 air loops (c), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop from which the first arch was knitted.

4. We begin to knit the first lower petal: Cast on 4 stitches. p. If you turn the knitting a little, the back (purl) jumpers will be visible

there is one loop on the hook (shaded point in the diagram), we pull out one loop at a time from the purl jumpers (4 sticks), we pull the last one out from under the arch (outermost stick)

there should be 6 loops on the hook

5. Close the row: grab the working thread and knit loops in pairs on the hook (grab the working thread and pull it through 2 loops, grab the working thread and pull it through the next 2 loops). We have the first row (connected column)

6. If you turn the knitting a little, the purl jumpers will be visible,

We knit one in. p.; we pull out the loops from the purl jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).

We close the row in pairs.

7. Next, we begin to cut the loops. In the sixth row, we begin knitting from a blind loop (insert the hook into the first jumper, grab the working thread and pull it through the loop on the hook). from further jumpers we pull out a loop and the last one from under the arch

We close the row in pairs.

To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch

We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will look like this

To move to the upper petals, make 1 in. p insert the hook into half the loop of the small circle and knit a blind loop

On a small circle you need to tie 3 arches from 4 in. p (2 arches for petals and 1 for the core)

8. Dial 5 v. p and knit the first connection. upper petal column

First upper petal:

Two petals

We tie the upper petals with single crochets (I laid thin wire along the contour to better hold their shape). The lower petals were tied with stbn (without wire). It turned out like this

Sew on beads, maybe small beads, and admire

Starching caps

1. Wash the cap in warm water (30-40 degrees). I use bleach to wash my white hats. washing powder, for colored - powder for colored things.

2. Prepare the starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and transparent. Leave to cool.

3. Thoroughly starch the washed hats, squeeze them out (without twisting), removing excess starch.

4. To dry the hats, I use regular inflatable balloons, after inflating them to the desired size.

5. During the drying process, I periodically give the brim the desired shape, and iron the brim of the openwork caps through a layer of fabric.

MORE HATS AND FLOWERS WITH THEM WITH DIAGRAMS

click on the picture to enlarge