Crochet a summer headband. Headband. Models with descriptions. How to knit, crochet. Schemes, instructions. Summer crochet headband for women

A knitted headband is a stylish and fashionable accessory that is making a triumphant return to the fashion Olympus. Today it is not only a fashionable touch and an accent of the image. This is an opportunity to show your individuality, stand out from the crowd and add bright notes to your set. This product is recognized as a spectacular headdress and has a number of advantages.

Description

This accessory has been known since ancient times. In the old days it was called "forehead" or "ochelye" and was a narrow bandage on the forehead, which was made of fabric, birch bark or other natural materials. The product served as a talisman, so it was worn not only by women, but also by men.

Today this product is called "hoop", "headband", "elastic band" and unlike the previous purpose, it is intended to protect the head from cold and bad weather. In addition to practical functions, it also carries an aesthetic load, gradually becoming a classic of the modern wardrobe.

photos

A modern headband is a knitted elastic hoop or wide strip knitted fabric, sewn into a ring. In some cases, it does not have a seam at all, as it is knitted in the round with ring knitting needles. The bandage covers the head, covering the forehead and ears.

Features and Benefits

A knitted headband is a worthy alternative to a hat. Its popularity is due to the close attention of designers and skilled craftswomen. It is ideal for the off-season, when it is too early to wear a hat, but you want to insulate your head and ears. Due to its width, it is able to cover most of the head, while allowing you to demonstrate the hairstyle and beauty of the hair.

The accessory is a kind of decoration for the head, securely fixes the hairstyle and helps maintain its neatness. In some cases the accessory replaces a hairpin, hair tie or plastic headband, not allowing your curls to cover your face. In addition, a stylish bandage covers the ears and forehead from the cold and piercing wind, protecting them from illness. This is an ideal product for fashionistas who don't like to wear warm hats in the cold season.

photos

Such accessories allow a woman to be the center of attention. They stand out noticeably against the background of any other hats, while looking sophisticated and elegant. This is a beautiful addition to the image that the fair sex likes of different ages: Even little girls love him.

Today, the choice of shades of such accessories is so diverse that it allows you to choose a product to match your outfit, shoes, accessories or jewelry.

photos

A bandage in a contrasting shade will become bright accent, even if its tone is muted or not bright.

Knitted headbands are universal: they can be combined with different clothes, adding fresh, elegant notes to every ensemble. They are harmonious in an outfit with a jacket, jeans, coat, raincoat, trousers, skirt and even a dress.

These accessories can come in all sorts of patterns. This allows you to create a successful duet of a headband and a sweater, pullover or cardigan, choosing the same pattern. Fashionable options are often paired with a scarf or mitts (knitted fingerless gloves). Such compositions emphasize the individuality and uniqueness of the image.

You can buy a headband in a store or knit it yourself, choosing the pattern you like best. This accessory can be knitted or crocheted without much difficulty. In this case, the pattern can be laconic (consisting of facial loops) or complex (with voluminous plaits, braids, weaving). The bandage itself can be single or double, twisted, similar to a turban or hat.

In addition to warm options, today brands offer delicate summer models that, in their beauty, can replace hair hoops, as well as caps, Panama hats, berets and hats. They have a wide selection of patterns and are distinguished by the presence of delicate decorative elements.

Pros

The advantages of this accessory include:

originality and uniqueness of the attire;
stylish design;
protection of the head from the cold;
versatility;
ease of putting on;
protection from the harmful effects of sunlight (in summer models);
ease of manufacture (does not require patterns);
wide selection of models and designs;
elasticity.

Cons

With all its advantages, such an accessory is not suitable for every fashionista.

Despite the neat appearance hairstyles, knitted headband can affect facial features, making them less expressive.

It looks different on every woman. This may also depend on the color type, method of wearing, and hair length.

Materials

The style of the headdress depends on the yarn from which it is made. It differs in composition, texture and thickness of the threads (the thicker the thread, the more voluminous the relief).

Warmer products are made from camel wool, alpaca and wool blend yarn(wool and polyacrylic) with a content of natural threads of at least 40%. Models for spring and summer sunny days are made from cotton, linen and viscose.

Color solutions

There are no restrictions in choosing the color of the model. He can be anything. The main thing is that it matches harmoniously with the outfit. Today in fashion natural and soft shades. Acidic, poisonous and flashy colors give way to muted contrasts, delicate pastel tones and practical dark shades.

Gray, beige are in fashion, brown, as well as shades of sky and mint.

Coral, olive, khaki, pink, lilac, burgundy, emerald and smoky colors are also popular.

Priority shades summer group today are white, cream, lilac and light gray. Many models for summer are made in yellow, turquoise and light pink tones.

This headband with crocheted ears is a godsend for women in cool, windy weather. Headbands have always been popular, they are comfortable and practical. They don’t take up much space in your purse, and at the same time they are good “warmers” for the ears.

Even if you picked up a crochet hook for the first time, let it be your “first try”, or your first work, to be a women’s crocheted headband. The same children's headband with ears also looks good. Diagrams and descriptions are compiled so that everything is as clear as possible.

You won’t see any kind of headbands on women’s heads! There are also warm ones: made of wool or mohair, or light, supportive ones made of cotton. For spring and summer, you need a cotton crochet headband. The hook number depends on the thickness of the thread. The thinner the hook, the denser the product. Experienced knitters advise that for cotton thread it is better to take a 1.75 hook, for wool or wool with additives - 2.5. And, as you know, usually the number of the recommended hook is always on the yarn tag.

We will knit the headband itself crosswise, and we will knit the ears separately. Cross knitting is very suitable for beginners, as it shows the width of the headband and can easily be made wider or narrower. It depends on how many Air Loops you collect. As you knit, the product is tried on the head and the length (head volume) is determined.

Abbreviations: VP - air loop, RLS - single crochet, PP - half loop, p. - loop.

So, we chose the yarn and hook, and we begin to crochet a headband.

First, let's decide what pattern to knit the main part. Some people call this pattern “faceted elastic,” but in the textbook it is designated as “single crochet with edge.”

In any case, you need to start with an air loop:

Scheme number 1.

To make such an elastic band, we cast on a chain of 15 loops.

This will be the width of the elastic. You can take more or fewer stitches - it depends on the desired width. In the photo there is a warm bandage 15 p. wide.

We dialed a chain of 15 VPs and after dialing a chain of VPs to move to the 1st row, we make 1 VP (it’s called a lifting loop).

1st row: insert the hook into the second loop of the chain and knit RLS (dc/single crochet). Next - to the next point of the chain and again RLS - and so repeat until the end of the row. At the end of the row - 1 VP lifting and knitting turn. RLS is worked like this:

Scheme number 2.

2nd row: knit all SC loops behind the back wall! The loop, when viewed from above, looks like a pigtail. Each item consists of two half/loops - PP. The PP that is closer to us is the front PP. And vice versa - the one that is further from us is the rear PP, or otherwise - the rear wall.

Insert the hook into the loop from above, pick up the back wall, pull out the working thread and knit a sc behind the back wall (loop arc). Let's look at the photo. This is how the hook goes:

The next row is knitted like the 2nd row. We leave the front PPs unknitted - they give the pattern relief. In this way we knit the strip to the desired length, trying it on the head from time to time. In the video, the result is an elastic band like this:

When the length is sufficient to fit around the head, we connect the beginning and end of the knitting. You can sew the beginning and end using a needle, or you can crochet it.

We finished crocheting the main part. Next we will make and sew on the ears.

We already have a knitted crochet headband base piece for women. All that remains is to understand the description of the ears and tie them.

Crocheting ears seems like nothing difficult, but in reality we want to crochet just such beautiful ears as in the photo. These ears are made from a sliding loop and a single crochet. For the ears, we crochet 4 parts, and then tie them with sc.

First you need to make a sliding loop. I knit it like this:

Tighten the sliding loop by pulling the “tail” of the thread. We knit 1 VP in the last sc, turn the knitting. Next will be the 2nd row.

2nd row: 4 RLS in each stitch, at the top of the triangle we knit not 1 RLS, but 2 RLS, and then RLS in each stitch 1 VP and turn of knitting.

So, in the 2nd row we got 9 RLS and VP.

3rd row: 2 sc in the outer st, sc in each st of the base to the top of the triangle, at the top - not 1, but 3 sc in one point. In the last paragraph, also 2 RLS. It turned out 13 RLS and VP. Turn.

So, in every second row we knit 2 sc in the outer loops, and at the top of each row we knit 3 sc.

When we have tied the eyelet part to the required height, we tie the base of the RLS. We sew the ears in pairs and sew them to our headband.

On the video - crocheting an ear step by step:

How to knit ears - option number 2

If it is easier for you to knit ears according to the pattern, then you can use this pattern:

Here, in this version, the ears begin to be knitted from 2 VPs. In the first VP, knit 3 sc, then in each row, knit 2 sc in the outer columns. This way we increase the ear detail in width and height. At the end, tie a sc.

Another option for tying a headband is a turban. The headband is knitted from Nako bambino yarn (25% wool, 75% acrylic 50 g/130 m). The product took 70 grams of yarn. Hook 2 mm thick.

Calculation for head circumference 55 cm, initial chain - 32 VP. We knit the product to the required length (52 cm), repeating 3-4 rows.

In the video there is a master class on the Turban headband in detail.

A crocheted headband is a convenient and practical item. It will protect your ears from the wind and keep them warm in cool weather. Such a headband will not take up much space in your bag, and tying it, even for beginners, will not be difficult.

A headband, which is easier to crochet than knitting, can be made for both a girl and an adult woman.

To knit it you will need a small amount of materials:

yarn of the required color;
a hook, the size of which is suitable for the selected threads;
needle and thread;
various elements for decoration (rhinestones, stripes, etc.).

How to choose yarn and hook number

You can crochet a wide variety of headbands. It is important to choose the right threads for knitting and a suitable hook for them. The denser the threads, the greater the relief of the patterns and the volume of the bandage.

When choosing yarn, you should adhere to the following recommendations:

The choice of yarn depends on when you plan to wear the headband (in cool or warm weather). In summer, you should choose yarn made from cotton, viscose or linen. For warm options, purchase wool or wool blend. If you knit it in several threads, the bandage will be more voluminous;
since this product comes into contact with the scalp, it is necessary to choose threads with a natural fiber content of at least 30-40%;
The best yarn thickness is 250-300 m/100g.

When purchasing a hook, you must follow the following rules:

the length of the hook should be from 12 to 16 cm;
the end of the hook, where the head is located, should be sharp, but not too sharp, so as not to cut yourself;
the handle can be plastic, aluminum or steel. Plastic ones are light, but break easily, while steel ones are heavy, but will last longer;
The hook diameter is selected to be the one recommended on the yarn label.

Headband Pattern Ideas

A headband that can be crocheted using a variety of patterns will become an indispensable item in your wardrobe. Among the most popular patterns for headbands, some are presented in the table below.

Name	Drawing	Scheme
Braids
Volumetric plaits and braids
Chunky knit pattern
Pattern with relief
Openwork pattern
Braids and plaits
Paths with openwork
Leaf pattern
Close knit

Schemes, step-by-step description of knitting headbands

The headband, which even beginners can crochet, is universal and has various models. The following are diagrams and descriptions various types bandages.

The following abbreviations are used in this article:

Air loops – Vp.
Air lift loop - runway.
Double crochet - dc.
Single crochet - sc.
Connecting loop – Sp.
Lifting loops – pp.
Half double crochet - plsn.

Headband for girls

For work you will need the following materials:

white threads "Romana". For them, hook No. 0.6;
melange threads “Lily” for them hook No. 0.75;
pink threads "Maxi". For them, hook No. 0.75.

To complete this product, the following steps are required:

Perform a motif based on a square: dial Ch 4 pcs. Close it in a ring. Raise the runway 3 pcs. and knit 4 rows according to the diagram. The 4th row ends with Sp in the 3rd Run. Raise Ch 5 pcs. Below is a diagram of the square.
VP sc 5 pcs. connect in a chain in the 3rd column of the base from the hook. Ch 2 pcs. lift and tie into the 2nd column of the base from the sc hook.

In Vp, connected by an arch, 5 pcs., tie dc 9 pcs. Skip one column of the base of the 4th row. In the next column of the base of the 4th row, tie sc. Cast on 2 lifting air loops. Skip base column 1 pc. Perform sc 1 pc.
Perform dc 2 pcs. in the first column of the base. Perform DC 1 pc. in the 2nd column of the base. Repeat 1 time along the entire row. Ch 2 pcs. lift. Skip 1 stitch and work sc into the base of the 4th row.

Perform the same steps as in the previous row: alternate dc 2 pcs. and ССн. The row ends with sc. Tear off the thread. Move to the next side. Fasten the thread to the 7th column of row No. 4. Make a chain of VP in the amount of 5 pieces. Skip 2 base stitches from the hook and sc. Knit the same as on the previous side.
Perform sc 1 pc. in the girth of the 1st row.

Perform sc around the perimeter. At the tip of the motif, make “pico” Ch 3 pcs. The base of the product is complete.
Next you need to use the diagram. Make flowers in the form of “daisies”. Then sew them to the base. Sew a bead into the center of each flower.
Make laces according to the diagram, the length of which is 5 cm. Sew them to the base and the bandage is ready.

Headband with embossed columns

The headband, which can be crocheted for both summer and winter, can be crocheted using embossed posts. The simplicity of knitting makes it easy to do even for beginners.

To complete the work you need:

mint threads;
hook 3 mm;
scissors.

For knitting you will need:

Cast on a chain from Ch. Its length must be equal to the required width of the product. However, the number of loops must be even, since the product will need to be folded in half.
In the 1st row, make 2 pcs. In the 3rd loop of the chain, perform plsn.
Knit a turning row: make PP 3 pcs. Then execute relief columns double crochet 3 pcs: yarn over and then pass the hook over the post from the front side. Work dc.
2 dc are carried out. from the wrong side. They are performed in the same way with the difference that the hook is wound from the wrong side and knitted there. Then 2 facial columns are made.
In this way, alternation is carried out until the end of the row. The last stitch is double crochet.
Turn the knitting and perform a similar row. Size 18-20 cm. In purl rows there are only purl loops, and in knit rows there are knit stitches.

Complete half of the row. If the product is 20 stitches wide, knit 10 stitches according to the pattern.
Perform turning rows of 10 columns of 8-9 pieces.
Connect the thread with the rest of the thread of the first part. Make 8-9 rows.
For overlap, two parts are crossed. Make a new row, which will consist of 20 columns. Knit 10 stitches along the first part. Knit 10 stitches along the second (bottom) part.
Make a canvas 18-20 cm.
Fold the bandage. Sew using sc. Turn the bandage inside out and straighten the overlap.

Mickey's Girlfriend headband

To make this dressing you will need the following materials:

Children's wool yarn.
Hook No. 3.
Sliding ring for ears.

Knitting process:

Dial VP 7 pcs.
Knit sc 6 pcs. and VPp. Do 6 rows like this.
Double the 1st column. The result will be 7 sc.
In the next 3 rows, knit sc 7 pcs.
In the next row, make sc 8 pcs. and Vpp.
Next 3 rows: Sc 8 pcs. and 1 pc. Runway
Next, double stitch 1 pc., and then sc and vpp are performed.
Next are 3 rows of 9 sc.
Double the first column. The result is 10 pieces. SBN.
The next 32 rows include 10 pcs. SBN. The result is a canvas measuring 22 cm.
Decrease stitches every 3 rows. To do this: knit the first stitch in the row. Then skip the next stitch of the previous row. The resulting bandage length is approximately 44 cm.

To make ears you need:

- on the sliding ring make sc 6 pcs. Tighten the ring tightly;
- in the next row knit 12 pcs. SBN. End each row with a connecting loop and runway;
- next row: sc 3 pcs. and double column 1 pc. Repeat 4 times;
- In the next row, make sc 17 pcs. Do not knit the last 5 pieces. columns.

Fasten the thread. Cut the thread, leaving about 30 cm for attaching the eyelet. Make the second eye in the same way. Sew the strip into a ring and attach the ears.

Bow headband

To make such a bandage, you need:

threads Lana Gold 800;
hook number 3.

The drawing is made by alternating the connecting loop and the PLSN. At the end of each row there is no Pp. You must immediately turn the work around and start with the connecting loop.

The connection of the bandage is carried out with a chain of VP in a zigzag pattern of 3-4 pcs. The center is tied as follows: Ch 6 pieces, starting from the 2nd loop from the hook, sc in each loop. Complete 8 rows. Sew a bandage.

Headband with flowers

A summer headband with flowers will go well with a skirt, a T-shirt and a dress.

To complete it you need:

yellow, white, red, orange and blue “Iris” threads;
hook No. 1.5;
elastic band: width 1.5 cm.

General scheme:

For the 1st flower: you need to take yellow threads. Form a loop. Knit PLSN 16 pcs into it. Make a ring.

Then the work is carried out according to the diagram below:

The colors are taken in the following order: yellow, orange, white and red.
To make the 2nd flower you need to: make a loop with white threads. Execute PLSN 8 pcs. Form a ring. Then carry out the work according to the scheme.

According to the above diagram, knit 2 flowers.

Color order:

for the first: white, orange, white;
for the second: blue, yellow, blue.

To make flower No. 3 you need to: make a loop with red threads. Knit 16 dc. Connect the ring. Carry out the work according to the following scheme:

Alternating colors: red, yellow and white.

4th flower: make a loop of thread yellow. Knit PLSN 8 pcs. Close it in a ring and knit according to the pattern below:

The colors alternate in this way: yellow, white and blue.

5th flower: make a loop with orange threads. Knit PLSN 8 pcs. Close the ring and knit according to the following pattern:

According to this pattern, 2 flowers are made.

The colors alternate as follows:

for the first: orange, blue, orange;
for the second: white, blue, white.

Then you need to measure the elastic. Sew the elastic with a 1.5 cm overlap on both sides. Place it on the jar and secure the flowers on it with needles. Then you need to sew the flowers to the elastic band.

Two-color headband for girls

To work you will need:

yarn – 2 colors;
hook;
needle and thread;
scissors.

Work process:

With the first color, dial VP in the amount of 80 pcs. and pp 2 pcs. As a result, a strip measuring 50-52 cm should come out.
- Start with the 3rd loop from the hook: Sc knit the 1st row. It is important to insert the hook into the link that is behind the loop so that the edge is even. Complete runway 2 pcs.
- Make sc behind the back wall of the loop. Knit in this manner until the length of the strip reaches 5 cm. We must not forget to make 2 run-ins at the end of the row.
- Then knit the second strip using the same pattern.
- Connect 2 strips as in the picture.
- Tie the ends of the strips.
- Tie with half columns.

Two-color crochet headband: step by step knitting

- At the end, make a ch. Leave the thread, leaving 10-15 cm.
- Do steps 6-8 on the other side.
- Attach the thread to the side. Perform ch 2 pcs. Finish the edge of the bandage with sc.
- Cut the thread, leaving the end. Do step 10 on the other side, but do not cut the thread.
- Fasten the bandage using the remaining threads. To do this, fold it inward with the front side. The ends perform PSB.
- Hide the ends of the threads in the knitting using a needle.
The bandage is ready.

Summer headband for women

A summer headband can be knitted from flax fiber. It will suit any outfit: dress, sundress, shorts and jeans.

To make it you need:

linen threads;
hook 6 mm.

Manufacturing process:

A pattern of 44 Ch is made. Their number may be more or less. It all depends on the circumference of the head.
Using a connecting loop, close the chain to continue knitting in the round.
Execute runway.
Connect a row of dc.
Repeat step 3.
In the second row, make a ch, and the remaining loops - sc.
Rapport is carried out to the desired width of the bandage.
Using the same scheme, make a rectangle measuring 4-6 cm. It is necessary for dressing.
Close the seam from the connecting loops with this rectangle.
Decorate the headband with rhinestones, sparkles, and monisto.

Crochet winter headband for women

A headband made of wool or wool mixture can replace a hat.

To make it you will need:

wool yarn with acrylic;
hook No. 4-5.

To make it you will need to perform the following steps:

Dial Vp. Their length is equal to the circumference of the head. The average size for women is 89 cm.
The bandage is performed in alternating rows: a straight row, the next one - a reverse one.
Front side – Ch 5 pcs. From the 2nd loop, the thread is pulled from 5 loops of the braid. That is, the hook must be inserted into the stitch of the cast-on chain, then the thread is pulled out, forming 2 loops. They must be left on the hook without tying. Move to next loop.
When formed 6 pcs. yarn over loops. The working thread is pulled through 6 loops and 1 pc. Ch to make a hole.
Place 6 pcs on hook. loops Pull 1 loop from the hole, 1 loop from the last one that was included in the previous repeat, 1 loop from the chain loop, 2 loops from the next 2 chain loops.
Yarn over the thread onto the hook. Pull 6 loops through the yarn over. Make Vp.
Knit the row in the same way as steps 5 and 6. The last loop is knitted with dc.
Wrong side, 2nd row: Ch 2 pcs., plsn 2 pcs. Last dc. The result is 44 stars and 2 dc.
Then repeat steps 2 to 8 until the product is required size.
Use connecting loops to process the edge of the product.
The headband can be decorated with down, fur or light fabric.

Turban style headband

To complete this model you will need:

semi-wool threads;
hook No. 3;
needle;
scissors.

Execution:

Cast on loops. Their number depends on the volume of the head. The example uses 20 pcs. loops and 3 pp.
Make the 1st row from plsn. To do this: make a yarn over, insert the hook into the loop, take a working thread, pull it through and knit all the components with one loop: the elongated loop, the yarn over, the previous loop. Make 3 runways. at the end of the row.
The second row is knitted with an elastic band. Alternating convex relief half-column 2 pcs. and concave relief half-column 1 pc.

Performing the 3rd row: the same elastic band. Only convex half-column 1 pc. and concave half-column 2 pcs. Knit to a length of 20 cm.
The next row is completed halfway. In this example, columns are made 10 pcs., Ch 3 pcs. Then the work is unrolled and knitted to a strip length of 10 cm.
Finish the last row. Knit a ch and cut the thread (the tip of the thread should be 10-15 cm).
Attach thread to make the second strip. Knit PP 3 pcs. and perform the same pattern.

Place the strips on top of each other and join them in the next row.
Continue working another 20 cm.
Fold the product in half. The front side should be on the inside. Using half-columns, fasten the ends.
Make the last loop chain. Cut the thread, leaving the tip.
Use a wide eyed needle to hide all the threads.

Openwork headband

For work you need: cotton thread, hook No. 1.

Work process:

Dial Ch 27 pcs.
On the 9th row from the hook, work a sc. As a result, an arch emerges from 5 Vp.
From Vp 5 pcs. dial the chain. Skip 2 stitches. Attach the chain to the 3rd loop of sc. So perform 5 arches consisting of 5 ch.
Execution of the 2nd row:
- dial ch 8 pcs. chain. Attach a sc chain to the central part of the first arch;
- Before the end of the row, perform arches of 5 Ch.

Continue this way up to the 18th row inclusive.

19 row. Finish it this way: perform Ch 3 pcs. in the last arch and make a dc in the base of the last arch from the previous row.
Row 20: 4 arches are made, consisting of VP 5 pieces. The row ends as 19.
Rows 21 and 22 are knitted in the same way.
Rows 23-30 are performed according to the scheme: in each row, make 3 arches, consisting of 5 pieces. Vp. 3 strips are made from Vp.
Finish the 30th row as follows: raise with half-columns to the center of the arch of 5 Ch.
A chain of 12 pieces is made. Vp. Attach to the second loop from the hook with a half-column. Make a chain of Ch 8 pcs. Attach the chain to the top of the second arch.
Go to the top of the third arch with half-columns. Make a chain of Ch 10 pcs. Attach a chain to the top of the first two chains.
Ch tie a tie of the required length.
Replace the thread with a different color and knit the second side of the headband in a mirror image.
Sew any decoration into the center.

New fashionable headband models in 2019

Bandages, crocheted, are a fashionable and practical element female image. In 2019, designers are offering new fashionable options for stripes. They come in different designs, colors and finishes. Today, the most popular types are headbands made from several materials: satin, cotton, silk.

The most popular types of dressings include:

product with a small pattern;
spiral pattern;
jacquard designs;
openwork knitting.

To decorate the accessory, you can use bows, buttons, and flowers.

For older women, it is worth choosing monochromatic headbands. For special occasions you can use rich shades, and for everyday life calmer tones. Beautiful colors: chocolate, emerald and eggplant. The table below shows some options for headbands with knitting patterns.

Name	Scheme
Option in the form of a bow
Openwork strip
Floral motif

This crocheted headband will become an indispensable item in your wardrobe. It can be worn by both women and girls. A variety of headband models allow you to wear this accessory with any style of clothing. This accessory can be made with your own hands. The ease of execution allows even beginners to knit it.

Article format: Natalie Podolskaya

Video about knitting a headband

Crochet headband - video on how to knit:

An active mother-handicrafter will not sit still for a minute so as not to knit a new thing for her baby. But when a young princess’s wardrobe is already bursting with hats, booties and dresses, it’s difficult to come up with something new. A great addition to the collection will be a crochet headband for girls. You will find diagrams and descriptions of this product in our article.

A cute ribbon on your head can be the first accessory of a young fashionista. It can be used as an attribute for a photo shoot or simply put on the baby’s head during periods of sudden cold weather. Be that as it may, knitting a headband for a girl with your own hands is quite simple: you just need to strictly follow our instructions.

Required materials:

1 skein of cotton yarn;
hook size 3 mm;
1 hair elastic;
sewing needle.

Process description:

Light headband for baby

The summer version of the baby headband is best knitted using light cotton, linen or worsted yarn. If you are knitting for a newborn baby, additionally make sure that the selected materials are hypoallergenic and only then start working.

This openwork headband for girls is crocheted in sizes up to 5 mm and smaller in a circular pattern.

Required materials:

four-ply worsted yarn;
crochet hook 5 mm.

Process description:

We create a beautiful accessory with our own hands

During the off-season, when no one wears hats anymore, the weather can be very changeable and dangerous to health. Tie a warm headband and it will help hide your ears and head from the piercing wind, and the modest decor will be appropriate for any outerwear. In the process of crocheting headbands for women, not only the diagram will help you, but also detailed instructions presented in this master class.

Required materials:

crochet hook size 6 mm;
linen yarn;
scissors and needle.

Process description:

The article is devoted to crocheting. This simple invention in skillful hands creates amazingly beautiful openwork things. This year, in addition to clothing, designers famous brands presented the line separately fashion accessories. The unformatted headbands attracted the general attention of the female audience.

Depending on the shape, texture of the material and method of fixation, the original element is capable of:

add brightness and creativity to a formal business suit;
completely change the style of the image;
transform an ordinary outfit for every day into an evening one in one stroke.

Say, a pin-up or rockabilly headband creates a retro, Great Gatsby-style look. A wide babette headscarf is 50-60s chic, a Greek headband is sophisticated sophistication. And vintage vixen is a cool hipster hype.

Bandage tie elastic band
flower options purple
diagram examples with ears

Today's fashion dictates its own rules, changes standards, and demands naturalness. Hand made accessories are relevant, that is, made by hand. Headbands show creativity. They can be made from a scarf, sewn from fabric, knitted or crocheted.

Instead of buying a branded accessory, needlewomen knit headbands made by the designer. self made. These are exclusive things. Headbands are decorated with original brooches, stones, monistos, beads, buttons, sequins and other baubles.

The headband, which is crocheted, can be made in different styles, the choice of patterns is limitless. The fashionable headband is relevant for all ages and at any time of the year. A girl, teenager, girl, adult women can wear jewelry on their heads regardless of their face type or hair structure. A newborn baby up to one year old or an older child in an openwork headband looks incomparable.

Reasons to wear beautiful product mass - discharge from the maternity hospital, christenings, matinees, birthdays, graduations, celebrations or as an everyday element for fixing hairstyles.

Crochet headband for girls: patterns

Where to start with an accessory
makeup beautiful from the wind
yarn pattern

For women who know the basics of needlework, the product is simply crocheted. For beginning craftswomen, it is also easy to master the skills if you try on models of dressings that are performed simple patterns. To facilitate understanding of the working process, each ornament is accompanied by a diagram with symbols. A description of the symbols and techniques, how the pattern is knitted, is usually included. The table shows the row numbering vertically, and the number of loops horizontally.

What you need to know.

The headband is knitted in two ways - seamless in the round or cut off for stitching.
Threads - fibers are distinguished by thickness and quality. Headbands for celebrations are knitted with threads of cotton texture in delicate pastel colors or white. Summer or sports headbands - you need a natural base or acrylic. Winter accessories or for the off-season period - yarn containing at least 40% wool.
Number crochet hook– choose according to the density of the bandage and the thickness of the yarn. For beginners, it is more convenient to knit with a device with a wooden handle.
Available tools - scissors, a centimeter for measuring head circumference (G), a needle with a large eye, a ruler, ordinary elastic bands for curls, satin ribbons, preferably thin.

How to crochet a headband for a girl

The headband is knitted according to a simple pattern. Even a beginner can do it. The main thing is to follow the instructions and try to master the basics of how to knit a bandage. Remember the abbreviations:

base (chain chain) – air loops (chain);
double crochet (dc) or without it (dc).

Step-by-step instructions on how to knit a headband for a girl:

Prepare a skein of 225 m/50 g cotton yarn, a 2.5-3 mm hook, and a regular hair tie.
The headband is knitted using a chain of air loops, the number of which depends on the width of the product. The number must be odd.
Cast on 7-11 ch (let’s take 9 as an example) - this is the basis for attaching to the elastic band.
1 additional chain stitch is knitted, then the hook is inserted into the stitch of the next row.
Place the device under the elastic band, grab the working thread, ending the loop.
Do 6 repetitions of the previous two movements to get 9 sts.
Cast on 3 sts to perform the rise, knit with a double crochet (dc), connecting to each stitch of the last row.
Repeat 3 ch, complete 1 st. dn between lines.
Points 5 to 8 are rapport, a basic pattern, done several times. This algorithm is knitted to a length corresponding to the circumference of the head. To be sure, check against a ruler.
Secure the free edge of the bandage with an elastic band without twisting the stitches.
Start decorating. You can tie flowers on a headband, make a kanzashi bow in Japanese technology or buy ready-made accessories. A large element or many miniature ones, concentrate in one place of the bandage or distribute along the entire length.
The contrast looks beautiful satin ribbon, stretched with stitches along the center of the bandage with a transverse line and tied with a bow.
If you are using a handmade flower, decorate it in the middle with a button, bead or pearl, and around the edges with felt or thread leaves.
The length of the headband is usually 3-4 cm shorter. It is necessary that the accessory sits tightly on the hairstyle.

Children's crochet headband

Headband knit flower
options with ears for a child
white for children from the wind

A summer dress for a newborn daughter or a girl up to one year old is knitted only from natural fiber. Cotton, linen or worsted yarn are suitable for the headband.

If it fits openwork model“Scheherazade”, prepare a hook No. 0.6 mm, a skein of cotton thread (for example, “Romana”).

Technical guide or how to knit a headband step by step:

Start the scale pattern with a set of chains air loops.
Work a st at 3 ch from the hook. dc + 2 ch.
Skip 2 chs on cast on chain, then make 2 sts in 3 chs. n.
Knit again 7 times according to step 3.
Dial 3 ch.
Yarn over and insert the hook under the previous stitch. dc, grabbing the working thread.
Perform 7 tbsp. dc + 1 ch.
Step 6 of the pattern is knitted again.
Do 7 tbsp again. dc + skip 2 tbsp. n.
Knit sequentially point 7, then 6.
This is a rapport with which the third scale is knitted in a similar way.
Pattern 4 start with 7 tbsp. dc + 1 ch. Second half – 6 tbsp. dc + 3 ch.
A connecting loop is knitted in the center of the scale.
That is, 3 ch + 1 st. dc in the middle.
Then insert the hook into the space between the scales + simultaneously into the center of two stitches. dc of the previous row. Make 2 tbsp. n.
Knit a continuation of the pattern - 2 ch + 2 sts. dc in the middle + 2 ch + actions of point 15.
This is the first row with a 4 scale pattern.
The basis for the second line is 2 ch + 1 st. dc throughout the chain.
Then yarn over and skip 2 tbsp. dc, knit 7 tbsp. dc + 1 ch + 7 sts. n. Repeat 3 times.
The scales will be arranged in a checkerboard pattern.
Follow steps 13 and 14.
Then knit 3 ch + 2 sts. dc in the middle and so on for the entire row of the pattern.
Cast on 3 ch + 1 yo. Next is the rapport of the first line from points 2 to 17.
The length of the bandage is approximately 45 cm. Don't forget to secure the end of the thread.
Fold the bandage - one end up, the other down. Sew the edges.
The result is a headband with a binding in the center, which is decorated with a bow, flower, brooch, beads, button, and stones. The choice of pattern depends on your imagination.

Summer crochet headband for women

A beautiful strip of thin linen yarn in the ethnic style “turban” fits with any outfit - dresses, sundresses, trouser or skirt sets, shorts, jeans.

How to knit a headband - a step-by-step execution diagram.

To knit a strip, prepare a 6mm hook and flax fiber.
44 air loops are knitted for the pattern. This is the average quantity for example. The size can be larger or smaller, it depends on the circumference of the head.
The chain is closed with a connecting loop to continue knitting in the round.
Make 1 ch for lifting, then do the entire row with double crochets. Finish with point 3.
The second line of the pattern is 1 ch + the remaining sts. bn.
The repeat is knitted again to the required width of the strip.
Using a similar pattern, a small rectangle of 4–6 cm is knitted. It should be used instead of bandaging as when making a fabric hoop.
Close the seam of the bandage from the connecting loops with this small piece. You need to get a ring in the center.
Cover the headband with rhinestones, monistos, sparkles, wooden or metal baubles. For nautical design summer vacation The shells and striped colors in the pattern look gorgeous.

Tie an elastic band
makeup yarn dweta
clasp examples

Crochet winter headband for girls and women

A good alternative to hats would be a fashionable, exclusive handmade accessory.

Master class with detailed description:

The warm headband is knitted from wool yarn with the addition of acrylic using crochet size 4-5.
Make a chain with chain loops that are long around the circumference of your head. For example, let's take 89 cm - this is the average size for girls and women.
The headband needs to be knitted in alternating rows - a straight row, the next reverse row, etc.
Front side – 5 ch, starting from 2 ch, pull out a thread from 5 loops of the braid. The principle of single crochets.
That is, insert the hook into one stitch of the cast-on chain, pull the thread, forming 2 loops. You leave them on the hook without tying or tying them. Then move on to the next stitch.
When 6 loops are formed, yarn over and pull the working thread through all 6 sts + 1 ch to create a hole in the pattern.
Cast on 6 sts on hook again. The sequence is as follows - pull 1 st from the hole + 1 st from the last one, which was part of the previous repeat + 1 st from the ch + 2 from the next 2 ch. You will get a block of 6 loops.
Yarn over the hook, pull all 6 stitches through it, end with 1 ch.
Knit the full row in the same way as points 7 and 8. The last air loop is performed with 1 tbsp. n.
The wrong side of the second row is 2 ch + 2 half double crochets in the hole of the pattern. Finish 1 tbsp. n.
The result will be 44 beautiful stars + 2 tbsp. dc in each hole.
Next, repeat the pattern from points 3 to 10 until you reach the desired size. Complete the pattern with a purl row. On average there are 8 lines.
Process the edges with connecting loops.
This is a warm and quite dense headband, so it is better to make the decor gentle. You can decorate with a ready-made large element made of fluff, fur or airy fabric.
A large knitted flower on a headband, made in a spiral, looks stylish. But this is a job for more experienced needlewomen.

With ears for women purple
simple luxury set
Beautiful

To better understand the process, watch a video tutorial in which craftswomen show the principles of gripping and making loops when knitting a headband in different ways.

Crochet headband

This is a fashionable relief method that is most functional for knitting warm items. Stylish sweaters, scarves, head caps, and mittens are made with this particular pattern. The main difference between an elastic band and a figured bandage is that the technique provides the best elasticity while maintaining the original shape, length and structure of the bandage.

Needlewomen admit that crocheted elastic bands are more elastic than those made with knitting needles. There are different simple and complex ways weaving. The main thing is to know the basic principles:

sequence of double crochets forming a concave and convex relief;
knitting with connecting stitches;
grab by the back half-loop - with or without double crochet, half-crochet;
standard techniques - 1x1, 2x2, relief - 1x2, 1x3, 3x3.

Simple step by step diagram, which even a beginner can handle.

This is what a 1x1 crocheted elastic band looks like:

Post Views: 10,574