Knitted slippers for beginners. Knitting slippers with knitting needles - step-by-step execution. Knitted slippers with felt soles

These wonderful knitted slippers are based on a very ordinary rectangle, knitted on two knitting needles and then sewn along the sole. A brilliant solution, isn't it? Here are two options for rectangular slippers, green and red-brown. Watch a detailed master class with a pattern from Elena Gottlieb and treat yourself to a new thing!

Knitted slippers from T. Brazhnikova

Scandinavian slippers knitted

We will knit slippers for the house, soft, beautiful and comfortable. It will be pleasant to walk around the apartment in them, easily and silently.

They are knitted from Vintage yarn (200 m/100 g), in two colors - Oats and Promenade. We take one skein of each color. The yarn thread includes wool (40%), acrylic (52%) and nylon (8%) fibers. It is distinguished by its durability, softness and good appearance retention.

We will knit with 4.5 mm knitting needles and 4 mm crochet. You will need a stitch marker (pt).

Slippers knitted in garter stitch

Yarn: Two skeins of fine sock yarn (each yarn needs about 35g/160yd/150m). Since these two yarns will be knitted together, you can choose the appropriate thickness of yarn to knit into one thread.
Yarn of a contrasting color for the seam and edge binding (thin for knitting in 2 threads or thicker yarn).
Size: women's large (EUR41). The size can be easily adjusted by changing the number of loops and the length of the sock.
Gauge/Needles: Gauge: 19 sts / 10 cm (4 in) in garter stitch.
Knitting needles: 3.5 mm (circular or double needles). One additional needle for closing stitches using the 3-needle method. Hook 3.5 mm. Darning needle for stitching.

Slippers knitted with lazy jacquard

• Size 37-38.
• Yarn “Krokha” Troitsky worsted mill, 20% wool, 80% acrylic, 135 m / 50 g.
• Yarn consumption: light gray 30 g, brown 40 g.
• Set of 5 knitting needles No. 3.

Knitted slippers from designer Ashley Knowlton

• Final sizes of slippers: foot circumference: 16.5(19.5, 22) cm.
• Length to connection: 10(11.5,12.5) cm.
• The overall length can be changed.
• Yarn: approximately 92 (110, 146) m of thick yarn. The total footage depends on the final length.
• The sample used is Quince and Co. yarn. Puffin (100% wool, 102m per 100g skein), Parsley color (parsley).
• Knitting needles and tools: circular needles US 10.5 (6.5mm), for knitting using the magic loop method, two edges. knitting needles, or a set of sock knitting needles.
• Knitting needle for braids; tapestry needle; latex glue for the outsole (optional).

Slippers - knitted boots

Slippers - knitted slippers

Slippers - footprints with knitting needles

Knitted slippers. Works from our readers

We knit slippers with knitting needles. Job Lana

Slippers with knitting needles Three leaves. Work by Tatyana Nakonechnaya

Knitted slippers Kappuchinki. Work by Tatyana Nakonechnaya

Lilac slippers knitted. Work by Svetlana Ivanova

Slippers - footprints with knitting needles. Work by Svetlana Ivanova

Spring slippers. Tatyana's work

Slippers from pawa. Tatyana's works

Knitted slippers. Tatyana's works

Knitted slippers. Tatyana's works

Knitted slippers. Tatyana's work

Knitted slippers - footprints. Valeria's work

Knitted slippers - footprints. Valeria's works

Why are slippers better than knitted socks? Firstly, they can be knitted faster, secondly, you will need much less yarn and thirdly, this option looks much more feminine. The main thing is to choose a delicate yarn with a pleasant color for you. And these slippers will become your favorite ones. And most importantly, you can knit not just one of these slippers, but under every home suit or robe.

In this selection, I tried to select the most beautiful knitted slippers (slippers) with knitting needles. All slippers are given with detailed descriptions and knitting patterns.

Practical and at the same time elegant knitted slippers with embroidery.

Size: 36-38

To knit slippers you will need: thick yarn (50% wool, 50% acrylic) 100 g. dark blue, remains of gray-blue, blue for embroidery, knitting needles No. 4, hook No. 5.

Knitted pink slippers

Size: 35/37 — 38/40 — 42/44

Foot Length: 22 - 24 - 27 cm

Needles size 6 - or the size required to obtain 13 loops x 17 rows = 10 x 10 cm.

Garter stitch (straight and reverse rows): knit all rows.

Instructions for adding loops: add 1 loop at a time on the front side, making a yarn over. In the reverse row, knit the yarn over behind the back wall so that there are no holes.

Slippers: knit in straight and reverse rows from toe to heel.

Cast on 12-13-14 stitches on size 6 needles (leaving about 30cm of yarn end for stitching). Mark the 4th and 9-10-11 loops with a marker. Work in knit stitch, at the same time increase 1 stitch on each side of both markers, and repeat increases on every second row a total of 4 times = 28-29-30 stitches.

At a height of 9-10-11 cm, knit the next row like this: 7 stitches in garter stitch, 14-15-16 in knit stitch, 7 in garter stitch. Continue in the same way until the height is 22-24-27 cm, close.

Assembly: sew and tighten the toe of the slipper with thread

Footprints with leaves very soft and warm.

Size(s): 35/37 — 38/40 — 41/43
Foot length: 22 - 24 - 27 cm.

Yarn: DROPS ESKIMO from Garnstudio (100% wool; 50 gr. ~ 50 m.)

Number of balls: 150 gr.

Tools): straight knitting needles 4 mm.

Knitting density: 15 p. x 19 r. = 10 x 10 cm.

Garter stitch in straight and reverse rows. Knit all stitches. 1 rib = 2 rows of L.

Addition: Increase on both sides of the central two loops using yarn overs. In the next row, knit yarn overs twisted to avoid holes.

Description of knitting slippers

Knit in straight and reverse rows from top to bottom, starting from the middle of the back side.

Cast on 40-44-48 sts. Work 8 rows in garter stitch. Place the mark in the middle. Continue with stockinette stitch, knitting edge stitches as before in garter stitch. At the same time, in the first row of the front stitch, add 1 stitch on both sides of the central two stitches - see instructions for adding. Repeat the increase on each row (i.e. both RS and WS) a total of 13-14-16 times = 66-72-80 sts. Work one row after the last increase. Now the length of the product is 11-11-12 cm. Continue with garter stitch, and after the 6th row, bind off 1 stitch at the beginning of the next four rows (i.e., close 2 stitches on each side) = 62-68 -76 sts. Having knitted a total of 10 rows in garter stitch, loosely bind off all the loops.

Assembly

Fold the product in half. Sew a seam under the foot and a back seam.

Knit a second slipper.

Footprint slippers are knitted

The tracks are knitted on two needles. They are very comfortable to wear and look beautiful on the foot. They are knitted from leftover yarn, but it is best to use yarn that contains more wool, because... they will be warm and follow the shape of your foot.

Cast on 30 loops.
1p – 6p: knit.p.
7r – 22r: knit stitch (odd rows – knit stitch, even rows – purl stitch)
23 – 41r: knit the heel, for this purpose knit 19 stitches, and 20 and 21 stitches. knit the faces together, turn the work. Knit 9 p.p., and knit 10 and 11 p.p. together. Turn the work again, knit 9 sts, knit 10 and 11 sts together, and so on, alternating 24 and 25 r. until there are 10 stitches left on the needle.
42p: cast on 10 stitches from the braids on the side of the heel, turn the work.
43r: knit 20 stitches and cast on another 10 stitches from the other side of the heel. = 30 p.
44 – 74r: knit faces. satin stitch
75r: start controls: 7 knits, 3 knits together, 10 knits, 3 knits together, 7 knits.
76r: p.p.
77r: 6 knits, 3 knits together, 8 knits, 3 knits together, 6 knits.
78r: p.p.
79r: 5 knits, 3 knits together, 6 knits, 3 knits together, 5 knits.
80r: p.p.
81r: 4 knits, 3 knits together, 4 knits, 3 knits together, 4 knits.
82r: purl. P.
83r: 3 knits, 3 knits together, 2 knits together, 3 knits together, 3 knits.
84r: 9 purl and 10th from the braid (in total, cast on 18 stitches from the braids on each side).
85r: 4 knits, 3 knits together, 3 knits. and the 4th from a braid.
86r = 84r.
87r = 85r.
Repeat 84 and 85 r until all the loops from the braids are knitted.
Bind off remaining 9 stitches.

There are other collections on this topic:

We also have very good selections on knitting for children on our website:

Knitted blankets (11 models with descriptions)

The article was prepared for the Dashkin House website. When copying, a link to the site is required.

Chapter: ,

Socks-slippers!

Let's say we take a blue and a red thread! Cast on 49 loops with blue thread. Knit 2 rows. Then we change the thread and knit 2 rows with red thread. Then we reattach the blue thread.
And now carefully row 5: we remove the first loop as usual, we also remove the second loop, we knit the 3rd loop with a knitted blue thread, we simply remove 4, knit 5, 6 we remove, 7 knit,..., 47 knit, 48 we remove, 49 we knit purl as usual ! You should end up with loops of different colors on the needle alternately.
We knit the 6th row like this: we remove the first loop with a blue thread, we also remove the 2nd loop, but so that the blue thread is behind the front of the loop, that is, it should pass on the wrong side of the product, the 3rd loop is front, the 4th loop is like 2, etc. d. to the end of the row.
Row 7: take the red thread and knit 2 rows.
9th row: take the blue thread, and start knitting the same way as in the 5th row, remove one, knit one..., so we knit 23 loops, remove the 24th loop, and from the 25th loop we make 9 loops (knit, yarn over, knit, yarn over, etc. .d.), 26 remove, 27 front, etc. to the end of the row.
10th row: we knit exactly the same as the 6th row, and we knit the loops that were knitted from the 25th loop of the previous row, and continue the same as in the 6th row.
Row 11-12: take the red thread and knit.
Now we knit 9,10,11,12 rows alternating to get 7 flowers (9 out of 1) - the number of flowers can be added or subtracted depending on the size of the foot.
It turns out that you finished with two rows of knit stitches with red thread.
Knit the next rows as 5,6,7,8.
And then you knit the trail, just as I described it in the first case.
I knitted the trail with threads of two colors together. In our case, blue and red. This makes the trail denser! You can also add synthetic thread to the mark for strength.

Well, the sock is ready. Try it!

The footprint and heel are knitted like this.
You should have 105 loops on your knitting needles (if you knitted according to my description based on 7 flowers being knitted). I knit the trail from 11 loops. that is: (105-11)/2=47. In total you knit 47 loops. Then 10 more loops, knit the 11th and 12th loops together, then turn the knitting, knit 10 loops again, 11th and 12th together, turn again, and so on until you run out of loops. It turns out almost the same as the heel of a sock. Then close the loops and sew the heel. Knitting is finished.

Homemade knitted slippers with two knitting needles are incredibly comfortable, lightweight and easy-to-wear indoor shoes. You can buy them, or you can knit them yourself, even if you have never done anything like this before.

You can learn to knit using step-by-step descriptions and lessons. This is not a very difficult task. The main thing is that a person has the desire, time and patience, because it may not work out the first time.

Note! Knitting slippers on two knitting needles without a seam can be done using any type of knitting, and a pattern can be selected as desired.

Table: patterns for beginner handicrafts.

The above patterns are very easy to knit. It doesn't take much time or effort.

To create beautiful men's, women's or children's slippers you will need:

1. Two double needles numbered "four".
2. Yarn approximately 150 grams. If large size slippers are expected, then a minimum of 200 grams will be required.
3. Centimeter.
4. Pin.

The choice of yarn should be taken seriously. After all, in the future, house shoes will be subject to considerable loads and frequent washing, so choose something durable, but pleasant to the touch.

If you plan to knit warm slippers, then choose yarn based on sheared sheep wool with the addition of artificial fibers.

Table: the most common and in demand types of yarns.

Cotton yarn is suitable for summer slippers.

The simplest footprints are knitted in stocking stitch.

A simple way to create cozy slippers: step-by-step instructions:

1. Initially, a set of forty loops is made.
2. This is how eight rows are knitted.
3. Then you need to divide the piece into 2 equal parts using a pin.
4. We knit the first loop, make a yarn over, tie it exactly to the middle and throw on another loop. We do this until the penultimate one.
5. Yarn over the last loop.
6. The remaining rows are knitted according to a similar pattern with one note: in each row you should add three loops in the middle and on the sides. This is done until their total number becomes 66 pieces.
7. Then six more rows are knitted in stockinette stitch.
8. After this, four rows are closed during the process with one loop.
9. Then we are engaged in the design of ten more rows using the stocking method.
10. We close the loops that remain.

Using the above technique, you can knit cozy and original seamless slippers very quickly. On average, the process takes from 2 to 6 hours, depending on the level of “skills” and experience.

From the specified amount of yarn, shoes of size 37 are obtained (the length of the foot of a knitted masterpiece is 22.5 centimeters).

Table: the number of loops initially cast on based on the size of the leg.

Second option

If for some reason you were unable to create the slippers you wanted using the first method, then try knitting them using the second method.

To create you will need:

1. Stocking needles number "three".
2. Yarn in the amount of two skeins of one hundred grams.

Step-by-step instruction:

1. We cast on thirteen loops.
2. We decorate them using the scarf method (eight rows in total).
3. In the ninth row, edge, front, edge are added.
4. The purl rows are made according to the pattern; yarn overs are made on the purl and knit stitches.
5. Do this in this order until there are thirty-nine pieces.
6. Then we select nine pieces in the middle and make a toe.
7. After this, the panel is turned over.
8. We make eight rows, and do the ninth and tenth together.
9. We do this in this order until there are nine central pieces left.
10. On the sides we collect eighteen edges.
11. We distribute the collected ones:

    Five pieces of edges are made using the scarf method.
    Twenty-one purl stitches are made using stockinette stitch.
    Four are tied with a tourniquet.
    Five pieces of edging are made using the scarf method.

12. Then we shift each next row by four loops.
13. When finished, you should have forty rows.
14. The heel is done the same way as the toe.

Important! In the end everything closes.

Two-tone slippers

Using stocking needles, you can create not only single-color, but also two-color slippers that will please the eye and keep you warm during the cold season.

Step-by-step instruction:

1. Initially, an odd number is collected.
2. Rows from the ankle to the base of the heel are made using the scarf method.
3. Next, count exactly half of the loops and place a colored odd thread.
4. Next, we decorate with the garter stitch method, making two casts each: the first is done before the central loop, the second after it.
5. Next, the product is knitted using the stocking method for six rows.
6. After this, we switch to the scarf again.
7. We decrease four loops every other row.
8. Using the decreasing method we make eight more rows.
9. The last one is closing.
10. The panel is folded in half and joined using a pin seam.

Useful video

Knitting is an incredibly interesting creative process that will brighten up any woman’s leisure time. This simple and fun activity allows you to create beautiful fashion products for men, women and children. Small knitted items - socks, mittens - do not take much time to make. And with the onset of cold weather, you should take care of your family and knit warm slippers, which will be much more pleasant to wear. We will provide you with simple instructions and patterns for knitting slippers and slippers with two knitting needles and show you a video with step-by-step lessons.

How to knit correctly

For knitting slippers and footwear you You will need plain or colored threads and two knitting needles. During the description of knitting slippers with knitting needles, you will see some words with abbreviations:

persons p. - front loop;

purl p. - purl loop.

Knitting slippers on two knitting needles without a seam

To knit slippers on two knitting needles you will need blue and white yarn and knitting needles. Do not forget to remove the first loop at the beginning of knitting each row.

• We knit 8 faces. p., using a tail. Then we continue knitting using the main thread.
• We string the next 7 loops onto the knitting needle from the other side and knit the front row.

Purl row again

• Then we alternate faces. and out. rows to the desired depth - the middle of the thumb - using white thread. You will end up with 24 stitches on your knitting needle. The loops that are knitted together are knitted behind the back wall.

We begin to decrease the loops

• knit 5 stitches;
• 3 p. - together;
• knit 6 stitches again.
• 3 p. - together.
• Knit the remaining 6 stitches.

Out. We knit a row without decreasing the loops.

• 4 p.;
• 3 p. - together;
• again 4 p.;
• 3 p. - together;
• knit the remaining 5 sts.

Front row:

• 4 p.;
• 3 p. - together;
• 2 p.;
• 3 p. - together;

Purl again. row.

Front row:

• 2 p.;
• 2 p. - together;
• 2 more points - also;
• and the last 2 p. - together;
• knit the remaining 3 sts.

You have 9 stitches left on your knitting needle.

Knitting a sock

We knit from the outside. p. to the end of the row. Having reached the last loop, we hook a loop from the side braid and knit it out. loop. It is better to take the loops from the inside. We get 10 loops. Turn the canvas over. Later, in purl. In a row we hook one side loop at a time. As a result, we will get a knitted slipper on two knitting needles without a single seam.

Front row:

• knit 3 p.;
• 3 p. together;
• 3 p.;
• 4 front loop is added from the side braid.

The purl row is knitted without changes.

Knit to the desired length of the sock.

End of knitting

Closing the row:

Knitting baby slippers

Children most of all need to keep their feet warm. The socks are knitted very quickly. To knit slippers of size 26 - 27, you will need medium-thick wool mixture and knitting needles 2 mm thick.

We knit the first row of faces. p. behind the back wall. Subsequent rows are behind the front wall.

Forming the heel

We knit another 14 rows.

We knit the next rows like this:

• 10 persons. p., then 2 persons. together. Turn the knitting over.
• knit 9 purls again. p., and the 10th and 1st from the other side - purl together. loops on the inside. side. Turn it over.
• 9 persons. p., then the 10th - together with the side outer loop.

We knit this way until there are no loops left on the sides of the product.

We connect the heel with the side (8 p.) parts. We knit faces. row of heels and put 8 loops on the knitting needle from one side, knitting with facial loops. Purl rows - purl stitches. We stitch the entire fabric.

Closing the sock

We knit every 10th and 11th faces. together. We knit the purl rows without changes. When there are 3 stitches left, we make a sharp reduction in the loops, knitting two purl stitches together. and persons loops.

We drop the last 2 loops onto the first one and pull the main thread inside the loop.

Sew the sock with a needle and thread.

Knitting booties

Knitting children's slippers can be an excellent basis for creating your baby's future wardrobe - a knitted scarf, warm hats and mittens, pants and a variety of knitted blouses. Even a novice craftswoman can cope with this task. Let's consider a simple knitting option for babies up to 3 months.

You will need:

• knitting needles No. 2;
• large needle;

• 25 - 30 g of children's yarn;
• hook.

Then we make additional 3 rows of faces. p. and using a needle and working thread close the row.

On the wrong side of the sole we fasten the thread and make a “back with a needle” seam to form a ruffle.

The footprints are easy to knit, take the shape of a leg and look very beautiful.

You can cast on more loops and turn away the sides. You can create simple and relief patterns. You need to start with the simplest ones, gradually moving on to more complex and interesting patterns. Beautiful berets, socks, mittens, sweaters, blouses, vests are knitted using simple patterns that even lazy craftswomen can handle.

Men's knitted house slippers

Many men also prefer to keep their feet warm. We will show you the steps of knitting original house slippers for men with a simple pattern with step-by-step photos. You can knit the product from two types of yarn.

• We connect the edges and tie them with a white thread using a hook. To do this, we pass the thread through two loops and make single crochets. We start on the left side, moving to the right edge and around the heel. The sheathing ends with the “crawfish step” technique.
  
  

As you can see, knitting such slippers is easy and quick.

• The following video shows and talks about knitting men's slippers in the form of moccasins. Knitting is done in garter stitch. You will need threads of any color and long and short knitting needles.

We hope that our article will be useful to you. The provided video tutorials with detailed master classes are designed for both experienced craftswomen and beginner needlewomen. They will help you create your own home masterpieces that will warm you in any cold weather.